Reference health
High‐Polarizability Organic Ferroelectric Materials Doping for Enhancing the Built‐In Electric Field of Perovskite Solar Cells Realizing Efficiency over 24%
61/61 checkable references clean · checked 2026-07-22
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
1 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 61 checked references that resolve
resolves10.1038/nenergy.2016.177
Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC(NH2)2PbI3-based perovskite solar cells
resolves10.1038/s41560-019-0382-6
Cation and anion immobilization through chemical bonding enhancement with fluorides for stable halide perovskite solar cells
resolves10.1126/science.aai9081
Efficient and stable solution-processed planar perovskite solar cells via contact passivation
resolves10.1038/s41586-021-03964-8
Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes
resolves10.1002/solr.202000629
Enhancing Built‐In Electric Field and Defect Passivation through Gradient Doping in Inverted CsPbI<sub>2</sub>Br Perovskite Solar Cells
resolves10.1016/j.joule.2018.10.011
Precise Control of Crystal Growth for Highly Efficient CsPbI2Br Perovskite Solar Cells
resolves10.1002/adfm.202001788
Organic N‐Type Molecule: Managing the Electronic States of Bulk Perovskite for High‐Performance Photovoltaics
resolves10.1002/adfm.202109321
Surface Reconstruction for Stable Monolithic All‐Inorganic Perovskite/Organic Tandem Solar Cells with over 21% Efficiency
resolves10.1016/j.nanoen.2019.104327
A built-in electric field induced by ferroelectrics increases halogen-free organic solar cell efficiency in various device types
resolves10.1002/aenm.201500615
Photovoltaic Switching Mechanism in Lateral Structure Hybrid Perovskite Solar Cells
resolves10.1002/adfm.201909755
Synergistic Reinforcement of Built‐In Electric Fields for Highly Efficient and Stable Perovskite Photovoltaics
resolves10.1002/adma.201902222
Polarized Ferroelectric Polymers for High‐Performance Perovskite Solar Cells
resolves10.1038/s41560-018-0324-8
Planar p–n homojunction perovskite solar cells with efficiency exceeding 21.3%
resolves10.1016/j.nanoen.2015.03.037
Interface band structure engineering by ferroelectric polarization in perovskite solar cells
resolves10.1002/adma.202101263
Effective Piezo‐Phototronic Enhancement of Flexible Photodetectors Based on 2D Hybrid Perovskite Ferroelectric Single‐Crystalline Thin‐Films
resolves10.1002/anie.202008494
Molecular Ferroelectrics‐Driven High‐Performance Perovskite Solar Cells
resolves10.1002/adma.202100486
Room‐Temperature Halide Perovskite Field‐Effect Transistors by Ion Transport Mitigation
resolves10.1039/C8CS00928G
Route towards sustainable smart sensors: ferroelectric polyvinylidene fluoride-based materials and their integration in flexible electronics
resolves10.1021/ma2024057
Novel Ferroelectric Polymers for High Energy Density and Low Loss Dielectrics
resolves10.1021/acs.jpclett.6b01176
Electric-Field-Induced Degradation of Methylammonium Lead Iodide Perovskite Solar Cells
resolves10.1117/12.2214007
Dielectric properties of hybrid perovskites and drift-diffusion modeling of perovskite cells
resolves10.1038/nmat3577
Revisiting the δ-phase of poly(vinylidene fluoride) for solution-processed ferroelectric thin films
resolves10.1038/nprot.2017.157
Electroactive poly(vinylidene fluoride)-based structures for advanced applications
resolves10.1039/C8TC05090B
A molecular ferroelectrics induced electroactive β-phase in solution processed PVDF films for flexible piezoelectric sensors
resolves10.1002/aenm.201500962
Mapping Electric Field‐Induced Switchable Poling and Structural Degradation in Hybrid Lead Halide Perovskite Thin Films
resolves10.1002/advs.201900252
Efficiency Enhancement with the Ferroelectric Coupling Effect Using P(VDF‐TrFE) in CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub> Solar Cells
resolves10.1126/science.abf5602
Interfacial toughening with self-assembled monolayers enhances perovskite solar cell reliability
resolves10.1002/aenm.201501354
A Smooth CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub> Film via a New Approach for Forming the PbI<sub>2</sub> Nanostructure Together with Strategically High CH<sub>3</sub>NH<sub>3</sub>I Concentration for High Efficient Planar‐Heterojunction Solar Cells
resolves10.1016/j.jechem.2020.09.026
Highly efficient and stable perovskite solar cells with strong hydrophobic barrier via introducing poly(vinylidene fluoride) additive
resolves10.1038/nenergy.2016.142
Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%
resolves10.1016/j.matchemphys.2019.122035
Poling and annealing of piezoelectric Poly(Vinylidene fluoride) micropillar arrays
resolves10.1038/s41467-019-12613-8
Reconfiguration of interfacial energy band structure for high-performance inverted structure perovskite solar cells
resolves10.3762/bjnano.9.172
Know your full potential: Quantitative Kelvin probe force microscopy on nanoscale electrical devices
resolves10.1111/jace.17645
Structural and microstructural features of lead‐free BNT–BT thin films: Nanoscale electromechanical response analysis
resolves10.1021/acsenergylett.1c01060
Effect of Side-Group-Regulated Dipolar Passivating Molecules on CsPbBr<sub>3</sub> Perovskite Solar Cells
resolves10.1002/adfm.201806506
An Ultrathin Ferroelectric Perovskite Oxide Layer for High‐Performance Hole Transport Material Free Carbon Based Halide Perovskite Solar Cells
resolves10.1002/advs.202101418
Tailored Lattice “Tape” to Confine Tensile Interface for 11.08%‐Efficiency All‐Inorganic CsPbBr<sub>3</sub> Perovskite Solar Cell with an Ultrahigh Voltage of 1.702 V
resolves10.1039/C8EE00162F
Introducing paired electric dipole layers for efficient and reproducible perovskite solar cells
resolves10.1002/ange.202105512
Robust Molecular Dipole‐Enabled Defect Passivation and Control of Energy‐Level Alignment for High‐Efficiency Perovskite Solar Cells
resolves10.1002/adfm.201807047
Control of Crystal Growth toward Scalable Fabrication of Perovskite Solar Cells
resolves10.1002/aenm.201802595
High‐Performance Perovskite Solar Cells with Enhanced Environmental Stability Based on a (<i>p</i>‐FC<sub>6</sub>H<sub>4</sub>C<sub>2</sub>H<sub>4</sub>NH<sub>3</sub>)<sub>2</sub>[PbI<sub>4</sub>] Capping Layer
resolves10.1038/s41467-020-15077-3
Enhanced optical path and electron diffusion length enable high-efficiency perovskite tandems
resolves10.1038/s41467-020-20580-8
Single-layered organic photovoltaics with double cascading charge transport pathways: 18% efficiencies
resolves10.1016/j.nanoen.2020.104933
Constructing highly efficient all-inorganic perovskite solar cells with efficiency exceeding 17% by using dopant-free polymeric electron-donor materials
resolves10.1039/C6EE00409A
Light and oxygen induced degradation limits the operational stability of methylammonium lead triiodide perovskite solar cells
resolves10.1002/adma.202105170
Elastic Lattice and Excess Charge Carrier Manipulation in 1D–3D Perovskite Solar Cells for Exceptionally Long‐Term Operational Stability
resolves10.1002/adma.201800544
Grain‐Boundary “Patches” by In Situ Conversion to Enhance Perovskite Solar Cells Stability
resolves10.1002/adma.201904408
Interfacial Residual Stress Relaxation in Perovskite Solar Cells with Improved Stability
resolves10.1002/adma.201905035
Detrimental Effect of Unreacted PbI<sub>2</sub> on the Long‐Term Stability of Perovskite Solar Cells
The 1 reference without a DOI — listed, not checked
no DOI — not checkedNREL Best Research‐Cell Efficiencies https://www.nrel.gov/pv/assets/pdfs/best-research-cell-efficiencies-rev211214.pdf(accessed December 2021).
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-22 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1002/adma.202110482"><img src="https://citestamp.com/citestamped/10.1002/adma.202110482/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1002/adma.202110482)