Reference health
Electrochemical Impedance and its Applications in Energy‐Storage Systems
123/123 checkable references clean · checked 2026-07-22
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
10 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 123 checked references that resolve
resolves10.5006/1.3577363
Evaluation of Corrosion Behavior of Coated Metals with AC Impedance Measurements
resolves10.1016/j.nanoen.2014.11.041
Self-powered metal surface anti-corrosion protection using energy harvested from rain drops and wind
resolves10.1016/S0378-7753(98)00109-8
Characterization of direct methanol fuel cells by ac impedance spectroscopy
resolves10.1016/j.jpowsour.2005.11.035
Model based PEM fuel cell state-of-health monitoring via ac impedance measurements
resolves10.1039/c3cp52586d
Carbon nanotubes as electronic interconnects in solid acid fuel cell electrodes
resolves10.1007/s100080050173
AC impedance and state-of-charge analysis of a sealed lithium-ion rechargeable battery
resolves10.1016/S0013-4686(00)00493-X
An AC impedance study of self-discharge mechanism of nickel–metal hydride (Ni–MH) battery using Mg2Ni-type hydrogen storage alloy anode
resolves10.1016/S0378-7753(99)00351-1
A review of state-of-charge indication of batteries by means of a.c. impedance measurements
resolves10.1016/j.apenergy.2012.09.030
Experimental investigation of the lithium-ion battery impedance characteristic at various conditions and aging states and its influence on the application
resolves10.1016/j.jpowsour.2016.03.059
AC impedance analysis of ionic and electronic conductivities in electrode mixture layers for an all-solid-state lithium-ion battery
resolves10.1021/nl3014814
A Yolk-Shell Design for Stabilized and Scalable Li-Ion Battery Alloy Anodes
resolves10.1002/aenm.201500716
Novel K<sub>3</sub>V<sub>2</sub>(PO<sub>4</sub>)<sub>3</sub>/C Bundled Nanowires as Superior Sodium‐Ion Battery Electrode with Ultrahigh Cycling Stability
resolves10.1051/jphystap:019100090045700
Sur la constitution de la charge électrique à la surface d'un électrolyte
resolves10.1016/S0378-7753(02)00108-8
Studies of the activated carbons used in double-layer supercapacitors
resolves10.1016/S0022-0728(84)80324-1
The analysis of electrode impedances complicated by the presence of a constant phase element
resolves10.1149/1.2129668
Application of A‐C Techniques to the Study of Lithium Diffusion in Tungsten Trioxide Thin Films
resolves10.1016/S0022-0728(98)00115-6
Impedance of constant phase element (CPE)-blocked diffusion in film electrodes
resolves10.1016/j.elecom.2007.01.017
A novel carbon-coated LiCoO2 as cathode material for lithium ion battery
resolves10.1016/j.jallcom.2016.11.237
Synthesis and electrochemical properties of xLiFePO4·(1−x)Na3V2(PO4)2F3/C composite for lithium-ion batteries
resolves10.1039/C6NR07650E
Comparison of reduction products from graphite oxide and graphene oxide for anode applications in lithium-ion batteries and sodium-ion batteries
resolves10.1016/S0013-4686(03)00146-4
Application of a.c. impedance technique to the study of the proton diffusion process in the porous MnO2 electrode
resolves10.1016/j.electacta.2003.08.030
The study of the proton diffusion process in the porous MnO2 electrode
resolves10.1038/nenergy.2016.39
Reversible aqueous zinc/manganese oxide energy storage from conversion reactions
resolves10.1149/1.2427575
Diffusion Theory of Polarization and Recuperation Applied to the Manganese Dioxide Electrode
resolves10.1016/0013-4686(76)85152-3
On the ac-impedance of electroactive powders. γ-manganese dioxide
resolves10.1016/0079-6786(94)00005-2
Structural and electrochemical properties of the proton / γ-MnO2 system
resolves10.1016/S0378-7753(01)00810-2
The ac impedance studies for porous MnO2 cathode by means of modified transmission line model
resolves10.1016/S0022-0728(72)80087-1
The electrical double layer of high surface porous carbon electrode
resolves10.1149/1.2133657
Double Layer Capacitance and Charging Rate of Ultramicroporous Carbon Electrodes
resolves10.1016/S0022-0728(83)80068-0
Stereoselectivity in ion electroadsorption and in double-layer charging of molecular sieve carbon electrodes
resolves10.1063/1.2831484
Determination of solid phase chemical diffusion coefficient and density of states by electrochemical methods: Application to iridium oxide-based thin films
resolves10.1016/j.electacta.2017.06.079
Anomalous diffusion of ions in electrochromic tungsten oxide films
resolves10.1016/j.jpowsour.2005.06.013
Investigation of the porosity of electrolytic manganese dioxide and its performance as alkaline cathode material
resolves10.1016/j.jpowsour.2010.06.022
Investigation of the impact of stacking pressure on a double-layer supercapacitor
resolves10.1039/FT9938900243
Problem of in situ real-area determination in evaluation of performance of rough or porous, gas-evolving electrocatalysts. Part 2.—Unfolding of the electrochemically accessible surface of rough or porous electrodes: a case-study with an electrodeposited porous Pt electrode
resolves10.1039/ft9938900235
Problem of in situ real-area determination in evaluation of performance of rough or porous, gas-evolving electrocatalysts. Part 1.—Basis for distinction between capacitance of the double layer and the pseudocapacitance due to adsorbed H in the H
<sub>2</sub>
evolution reaction at Pt
resolves10.1016/j.electacta.2011.07.096
New approach for the calculation of impedance spectra out of time domain data
resolves10.1149/2.1071709jes
A Physically-Based Equivalent Circuit Model for the Impedance of a LiFePO<sub>4</sub>/Graphite 26650 Cylindrical Cell
resolves10.1016/j.electacta.2010.05.072
A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries
resolves10.1016/j.jpowsour.2010.12.102
Characterization of high-power lithium-ion batteries by electrochemical impedance spectroscopy. I. Experimental investigation
resolves10.1149/2.0271606jes
Electrode Behavior RE-Visited: Monitoring Potential Windows, Capacity Loss, and Impedance Changes in Li<sub>1.03</sub>(Ni<sub>0.5</sub>Co<sub>0.2</sub>Mn<sub>0.3</sub>)<sub>0.97</sub>O<sub>2</sub>/Silicon-Graphite Full Cells
resolves10.1016/j.electacta.2017.01.128
Investigation of the Solid Electrolyte Interphase Formation at Graphite Anodes in Lithium-Ion Batteries with Electrochemical Impedance Spectroscopy
resolves10.1016/j.jpowsour.2012.05.095
Ac impedance analysis of lithium ion battery under temperature control
resolves10.1149/1.3126385
Cycle-Life Characterization of Automotive Lithium-Ion Batteries with LiNiO[sub 2] Cathode
resolves10.1149/2.1061501jes
Important Aspects for Reliable Electrochemical Impedance Spectroscopy Measurements of Li-Ion Battery Electrodes
resolves10.1149/07521.0001ecst
The Effect of Electrolyte Composition on Lithium Plating During Low Temperature Charging of Li-Ion Cells
resolves10.1149/1.1373377
Symmetrical Cell for Electrochemical AC Impedance Studies of Lithium Intercalation into Graphite
resolves10.1016/S0378-7753(03)00208-8
Study of life evaluation methods for Li-ion batteries for backup applications
resolves10.6113/JPE.2011.11.2.237
Novel State-of-Charge Estimation Method for Lithium Polymer Batteries Using Electrochemical Impedance Spectroscopy
resolves10.1016/j.ssi.2012.08.002
Electrochemical impedance spectroscopy of Li4Ti5O12 and LiCoO2 based half-cells and Li4Ti5O12/LiCoO2 cells: Internal interfaces and influence of state-of-charge and cycle number
resolves10.1016/j.jpowsour.2014.09.146
Combined State of Charge and State of Health estimation over lithium-ion battery cell cycle lifespan for electric vehicles
resolves10.1021/jp908090s
Elucidating the Mechanism of Oxygen Reduction for Lithium-Air Battery Applications
resolves10.1351/pac200779050851
Li-air batteries: A classic example of limitations owing to solubilities
resolves10.1016/j.jpowsour.2009.10.012
Investigation of the gas-diffusion-electrode used as lithium/air cathode in non-aqueous electrolyte and the importance of carbon material porosity
resolves10.1016/j.carbon.2010.11.045
Increased discharge capacity of a Li-air activated carbon cathode produced by preventing carbon surface passivation
resolves10.1002/er.1144
Analysis of electrochemical impedance spectroscopy in proton exchange membrane fuel cells
resolves10.1016/j.jpowsour.2013.04.011
Study of proton exchange membrane fuel cells using electrochemical impedance spectroscopy technique – A review
resolves10.1016/j.jpowsour.2016.06.119
Inductive phenomena at low frequencies in impedance spectra of proton exchange membrane fuel cells – A review
resolves10.1016/j.jpowsour.2007.02.048
Simultaneous oxygen-reduction and methanol-oxidation reactions at the cathode of a DMFC: A model-based electrochemical impedance spectroscopy study
resolves10.1016/j.jpowsour.2008.11.095
Influence of metal oxides on Pt catalysts for methanol electrooxidation using electrochemical impedance spectroscopy
resolves10.1016/j.jpowsour.2006.02.056
Characterization and evaluation of Pt-Ru catalyst supported on multi-walled carbon nanotubes by electrochemical impedance
resolves10.1016/j.jpowsour.2006.12.027
Electrochemical impedance studies on carbon supported PtRuNi and PtRu anode catalysts in acid medium for direct methanol fuel cell
resolves10.1149/2.0141506jes
Electrochemical Impedance Spectroscopy of Oxygen Reduction Reaction (ORR) in a Rotating Disk Electrode Configuration: Effect of Ionomer Content and Carbon-Support
resolves10.1016/j.electacta.2013.10.050
Determining electrochemically active surface area in PEM fuel cell electrodes with electrochemical impedance spectroscopy and its application to catalyst durability
resolves10.1016/j.electacta.2004.10.074
An electrochemical impedance spectroscopy study of fuel cell electrodes
resolves10.1016/j.electacta.2008.01.084
Investigation of electrode composition of polymer fuel cells by electrochemical impedance spectroscopy
resolves10.1016/j.jpowsour.2005.02.081
Symmetrical electrode mode for PEMFC characterisation using impedance spectroscopy
resolves10.1016/j.electacta.2005.02.108
Electrochemical impedance spectroscopy applied to polymer electrolyte fuel cells with a pseudo reference electrode arrangement
resolves10.1016/j.jpowsour.2010.02.054
Development of a method to estimate the lifespan of proton exchange membrane fuel cell using electrochemical impedance spectroscopy
resolves10.1016/j.surfcoat.2008.02.007
Electrochemical impedance spectroscopy and morphological analyses of pyrrole, phenylpyrrole and methoxyphenylpyrrole on carbon fiber microelectrodes
resolves10.1021/acs.nanolett.5b03576
Single-Nanowire Electrochemical Probe Detection for Internally Optimized Mechanism of Porous Graphene in Electrochemical Devices
resolves10.1016/S0013-4686(99)00121-8
Electrochemical impedance spectroscopy of porous electrodes: the effect of pore size distribution
resolves10.1016/S0013-4686(99)00436-3
The effect of pore size distribution on the frequency dispersion of porous electrodes
resolves10.1016/j.jpowsour.2005.10.048
Temperature behavior and impedance fundamentals of supercapacitors
resolves10.1149/1.2965503
Influence of Carbon Nanotube Grafting on the Impedance Behavior of Activated Carbon Capacitors
resolves10.1016/j.jelechem.2010.02.008
Effect of conductive filler on the impedance behaviors of activated carbon based electric double layer capacitors
resolves10.1016/S1872-5805(07)60015-8
Impedance of carbon aerogel/activated carbon composites as electrodes of electrochemical capacitors in aprotic electrolyte
resolves10.1149/1.1373450
Impedance Characteristics of the Nanoporous Honeycomb Diamond Electrodes for Electrical Double-Layer Capacitor Applications
resolves10.1016/j.electacta.2010.01.003
Qualitative Electrochemical Impedance Spectroscopy study of ion transport into sub-nanometer carbon pores in Electrochemical Double Layer Capacitor electrodes
resolves10.1149/1.1543948
Electrochemical Characteristics and Impedance Spectroscopy Studies of Carbon-Carbon Supercapacitors
resolves10.1007/s00339-005-3404-0
Electrode surface treatment and electrochemical impedance spectroscopy study on carbon/carbon supercapacitors
resolves10.1016/j.mseb.2015.12.007
Probing the electrochemical properties of TiO2/graphene composite by cyclic voltammetry and impedance spectroscopy
resolves10.1016/j.jpowsour.2006.03.041
Electrochemical characteristics and impedance spectroscopy studies of nano-cobalt silicate hydroxide for supercapacitor
resolves10.1016/j.ijhydene.2015.03.135
Montecarlo based quantitative Kramers–Kronig test for PEMFC impedance spectrum validation
resolves10.1016/j.measurement.2017.04.022
Determination of suitable parameters for battery analysis by Electrochemical Impedance Spectroscopy
resolves10.1016/0013-4686(90)80010-L
Applications of Kramers—Kronig transforms in the analysis of electrochemical impedance data—III. Stability and linearity
resolves10.1016/0013-4686(95)00433-5
The influence of error structure on interpretation of impedance spectra
resolves10.1023/A:1020599525160
Deconvolution of electrochemical impedance spectra for the identification of electrode reaction mechanisms in solid oxide fuel cells
resolves10.1016/j.electacta.2017.02.011
Distribution of Relaxation Times Analysis of High-Temperature PEM Fuel Cell Impedance Spectra
resolves10.1016/j.jpowsour.2017.07.006
Investigation of physico-chemical processes in lithium-ion batteries by deconvolution of electrochemical impedance spectra
resolves10.1016/j.jpowsour.2010.09.121
Studies on LiFePO4 as cathode material using impedance spectroscopy
The 10 references without a DOI — listed, not checked
no DOI — not checkedElectrochemical Methods: Fundamentals and Applications
no DOI — not checkedElectrochemical Kinetics
no DOI — not checkede_1_2_7_5_3
no DOI — not checkede_1_2_7_5_5
no DOI — not checkedImpedance Spectroscopy: Theory, Experiment and Applications
no DOI — not checkede_1_2_7_11_3
no DOI — not checkedH. Shi 1993 Simon Fraser University Burnaby BC Canada
no DOI — not checkedElectrochemical Response of Porous and Rough Electrodes
no DOI — not checkede_1_2_7_46_2
no DOI — not checkede_1_2_7_78_1
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-22 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1002/smtd.201700342"><img src="https://citestamp.com/citestamped/10.1002/smtd.201700342/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1002/smtd.201700342)