Reference health
Mechanical properties of oxide scales
56/56 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
34 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 56 checked references that resolve
resolves10.1002/srin.195702178
Untersuchungen über den Aufbau und die Haftfestigkeit von Zunderschichten auf Grobblechen aus unlegiertem Stahl
resolves10.1007/BF00613090
The mechanical properties of nickel oxide and their relationship to the morphology of thick oxide scales formed on nickel
resolves10.1007/978-1-4615-9059-0_1
The Mechanical Properties and Breakdown of Surface Oxide Films at Elevated Temperatures
resolves10.1080/09603409.1994.11689491
An approach to a global model of the mechanical behaviour of oxide scales
resolves10.1016/0010-938X(84)90051-9
Conditions for the initiation of oxide-scale cracking and spallation
resolves10.1016/0001-6160(89)90017-5
Effects of non-planarity on the mixed mode fracture resistance of bimaterial interfaces
resolves10.4028/www.scientific.net/MSF.43.243
Stresses in Oxide Films and Relationships with Cracking and Spalling
resolves10.1016/0020-7683(84)90012-X
On the mechanics of delamination and spalling in compressed films
resolves10.1179/mst.1988.4.5.398
Application of fracture mechanics to failure of surface oxide scales
resolves10.1007/978-94-009-1147-5_14
An Alternative View of the Effect of Active Elements on the Mechanical Properties of Scales
resolves10.1080/09603409.1994.11689477
Methods of measuring adhesion for thermally grown oxide scales
resolves10.1007/BF00665658
Oxide scale adhesion and impurity segregation at the scale/metal interface
resolves10.1557/JMR.1993.1291
Microscopy and microindentation mechanics of single crystal Fe−3 wt. % Si: Part I. Atomic force microscopy of a small indentation
resolves10.1016/0040-6090(93)90532-T
Metal-ceramic interfacial fracture resistance using the continuous microscratch technique
resolves10.1016/0956-716X(91)90026-W
The use of depth-sensing submicron indentation testing to characterize the mechanical behavior of thin oxide scales
resolves10.1080/09603409.1994.11689474
Use of the mechanical properties microprobe for characterization of oxide scales
resolves10.1115/1.3176069
A Test Specimen for Determining the Fracture Resistance of Bimaterial Interfaces
resolves10.1179/026708392790409833
Investigation of failure of brittle layers under compressive stresses using acoustic emission
resolves10.1007/BF00613230
The determination of fracture strains of growing surface oxides on mild steel at high temperatures
resolves10.1007/BF00664232
Deformation and cracking behavior of protective oxide scales on heat-resistant steels under tensile strain
resolves10.1007/BF01061927
The deformation behavior of NiO scales on Ni in argon and air at temperatures from 20 to 800°C with respect to the relief of growth stresses
resolves10.1016/0010-938X(93)90315-8
The tensile failure of nickel oxide scales at ambient and at growth temperature
resolves10.1007/BF00665485
Behavior of oxide scales on 2.25Cr-1Mo steel during thermal cycling. I. Scales formed in oxygen and air
resolves10.1007/BF00665486
Behavior of oxide scales on 2.25Cr-1Mo steel during thermal cycling. II. Scales grown in water vapor
resolves10.1111/j.1151-2916.1966.tb13283.x
High‐Temperature Elastic Properties of Polycrystalline MgO and Al
<sub>2</sub>
O
<sub>3</sub>
resolves10.1111/j.1151-2916.1959.tb15462.x
Young's Modulus of Various Refractory Materials as a Function of Temperature
resolves10.1016/S0010-938X(78)80027-4
The mechanical properties of surface oxides on nickel-base superalloys—I. Oxidation
resolves10.1002/mawe.19850160105
Microstructural aspects of Thermal Stress Resistance of high‐strength engineering ceramics. Part I: Data of thermal stress resistance of high‐strength engineering ceramics
resolves10.1007/BF00666597
Properties of protective oxide scales containing cerium on Incoloy 800H in oxidizing and sulfidizing environments. I. Constant-extension-rate study of mechanical properties
resolves10.1002/maco.19870381008
Computer simulation of oxide scale cracking/healing processes under substrate creep at high temperatures and comparison of the results to experimental data
The 34 references without a DOI — listed, not checked
no DOI — not checkedD. R. Holmes and R. T. Pascoe,Korrosion 24, 49 (1973).
no DOI — not checkedH. W. Grünling, B. Ilschner, S. Leistikow, A. Rahmel, and M. Schmidt, inBehaviour of High Temperature Alloys in Aggressive Environments, I. Kirman et al. (eds.) (The Metals Society), London, 1980), p. 869.
no DOI — not checkedD. J. Baxter and K. Natesan,Rev. High Temp. Mater. 5, 149 (1983).
no DOI — not checkedA. Rahmel and J. Manenc (eds.),Mechanische Eigenschaften und Haftung von Zunderschichten (Verlag Chemie, Weinheim, 1973).
no DOI — not checkedJ. Cathcart (ed.),Stress Effects and the Oxidation of Metals (TMS-AIME, New York, 1975).
no DOI — not checkedV. Guttmann and M. Merz (eds.),Corrosion and Mechanical Stress at High Temperatures (Applied Science Publishers, London, 1981).
no DOI — not checkedOxidation and Mechanical Properties, Special IssueMater. Sci. Techn. 6, (1990).
no DOI — not checkedMechanical Properties of Protective Oxide Scales, Special Issuemater. High Temp. 12 (1994).
no DOI — not checkedM. Schütze,Die Korrosionsschutzwirkung oxidischer Deckschichten unter thermischchemisch-mechanischer Werkstoffbeanspruchung, Materialkundlich-Technische Reihe, Vol. 10 (Gebr. Borntraeger Verlag, Berlin, 1991).
no DOI — not checkedC. H. Wells, P. S. Follansbee, and R. R. Dils, in Ref. 11, Special IssueMater. High Temp. 19, p. 220 (1994).
no DOI — not checkedU. R. Evans,An Introduction to Metallic Corrosion (Arnold, London, 1948).
no DOI — not checkedJ. Armitt, R. Holmes, M. I. Manning, D. B. Meadowcroft, and E. Metcalfe,The Spalling of Steam-Grown Oxide from Superheater and Reheater Tube Steels, EPRI Report FP-686 (Electric Power Research Institute, Palo Alto, 1978).
no DOI — not checkedM. I. Manning,in Ref. 12 p. 323.
no DOI — not checkedA. Kelly and N. H. McMillan,Strong Solids (Oxford University Press, Oxford, 1986).
no DOI — not checkedM. Schütze, inHigh Temperature Corrosion of Advanced Materials and Protective Coatings, Y. Saito et al. (eds.) (North-Holland, Amsterdam, 1992), p. 29.
no DOI — not checkedM. Nagl, W. T. Evans, D. J. Hall, and S. R. J. Saunders, Proc. 3rd Int. Symp. High Temp. Corrosion and Protection of Materials, R. Streiffet al. (eds.) (Les éditions de physique, Les Ulis, 1993), Vol. III, Part II, p. 933.
no DOI — not checkedM. Hollatz, M. Bobeth, W. Pompe, D. Lipkin, and D. Clarke,Phys Stat. Solidi, submitted.
no DOI — not checkedP. F. Tortorelli, J. R. Keiser, K. R. Willson, and W. C. Oliver, inMicroscopy of Oxidation, M. J. Bennett and G. W. Lorimer, (eds.) (The Institute of Metals, London, 1991), p. 271.
no DOI — not checkedG. Elssner, inAufbau von Oxidschichten auf Hochtemperaturwerkstoffen und ihre technische Bedeutung, A. Rahmel, (ed.) (DGM, Oberursel, 1983), p. 299.
no DOI — not checkedV. Konradi, Optimierung von Verbindungstechniken für Oxid-Oxid- und Oxid-Metallverbindungen, Diploma Thesis, Technische Hochschule Darmstadt, 1987.
no DOI — not checkedF. Förster,Z. Metall. 29, 109 (1937).
no DOI — not checkedD. Bruce and P. Hancock,J. Inst. Met. 97, 140 (1969).
no DOI — not checkedM. Nagl, W. T. Evans, D. J. Hall, and S. R. J. Saunders,Oxid. Met., submitted.
no DOI — not checkedU. Beller, Proc. Conf. Rasterelaktronenmikroskopie in der Materialprüfung, DVM, Berlin, 1994.
no DOI — not checkedD. H. Bradhurst and J. S. L. Leach,Trans. Br. Ceram. Soc. 62, 793 (1963).
no DOI — not checkedP. F. Tortorelli, in Ref. 37, Proc. 3rd Int. Symp. High Temp. Corrosion and Protection of Materials, R. Streiffet al. (eds.) (Les éditions de physique, Les Ulis, 1993), Vol. III, Part II, p. 943.
no DOI — not checkedG. Vagnard, Thesis, Faculté des Sciences de l'Université de Paris, 1965.
no DOI — not checkedP. Hancock,in Ref. 11 p. 155.
no DOI — not checkedH. J. Frost and M. F. Ashby,Deformation Mechanism Maps (Pergamon Press, Oxford, 1982).
no DOI — not checkedG. E. Dieter,Mechanical Metallurgy (McGraw-Hill, London, 1974).
no DOI — not checkedR. Morrell,Handbook of Properties of Technical and Engineering Ceramics (HMSO, London, 1987).
no DOI — not checkedG. Simmons and H. Wang,Single Crystal Elastic Constants and Calculated Aggregate Properties, 2nd ed. (MIT Press, Cambirdge, MA, 1971).
no DOI — not checkedM. Schmitz-Niederau and M. Schütze, Proc. 1 st Int. Symp. Gamma Titanium Aluminides 1995 (TMS, Warrendale).
no DOI — not checkedD. Bruce and P. Hancock,J. Inst. Met. 97, 148 (1969).
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1007/bf01046722"><img src="https://citestamp.com/citestamped/10.1007/bf01046722/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1007/bf01046722)