Reference health
Effect of Overaging Conditions on Microstructure and Mechanical Properties of Maraging Steel
25/25 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
5 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 25 checked references that resolve
resolves10.1007/s11661-006-1089-4
Age hardening and mechanical properties of a 2400 MPa grade cobalt-free maraging steel
resolves10.1007/s11661-004-0221-6
Microstructure and mechanical properties of a 2000 MPa Co-free maraging steel after aging at 753 K
resolves10.1361/105994903322692394
Optimization of Process Parameters for the Manufacturing of Rocket Casings: A Study Using Processing Maps
resolves10.1007/s11041-007-0005-x
Experience in TMT with the use of cold lengthwise rolling in dead rolls
resolves10.1023/B:JMSC.0000048744.03279.ec
Production of maraging steel grades and the influence of specified and nonspecified elements for special applications
resolves10.1016/j.actamat.2003.10.048
Precipitation hardening in a 12%Cr–9%Ni–4%Mo–2%Cu stainless steel
resolves10.1016/j.actamat.2004.08.018
Ageing behaviour of an Fe–20Ni–1.8Mn–1.6Ti–0.59Al (wt%) maraging alloy: clustering, precipitation and hardening
resolves10.1016/j.msea.2005.03.074
Effects of austenite reversion during overageing on the mechanical properties of 18 Ni (350) maraging steel
resolves10.1016/j.jmmm.2006.10.1091
Characterization of aging-induced microstructural changes in M250 maraging steel using magnetic parameters
resolves10.1007/s11665-009-9583-7
Effect of Cyclic Aging on Mechanical Properties and Microstructure of Maraging Steel 250
resolves10.2472/jsms.49.631
Influence of Aging Condition and Reversion Austenite on Fatigue Property of the 300 Grade 18Ni Maraging Steel.
resolves10.1016/j.jmmm.2015.05.037
Influence of reverted austenite on the texture and magnetic properties of 350 maraging steel
resolves10.1016/0956-7151(94)90259-3
Magnetic properties of maraging steel in relation to deformation and structural phase transformations
resolves10.1007/BF02652858
The effect of reverted austenite on the mechanical properties and toughness of 12 Ni and 18 Ni (200) maraging steels
resolves10.1016/0013-7944(80)90004-1
The effect of microstructure on the fracture toughness of 300 and 350 grade maraging steels
resolves10.1007/s10853-006-7170-y
Study of the austenite quantification by X-ray diffraction in the 18Ni-Co-Mo-Ti maraging 300 steel
resolves10.1016/S0921-5093(00)00838-8
Microstructural changes during welding and subsequent heat treatment of 18Ni (250-grade) maraging steel
resolves10.1007/s11665-009-9455-1
Investigation into Microstructures of Maraging Steel 250 Weldments and Effect of Post-Weld Heat Treatments
resolves10.1016/j.msea.2006.05.071
Comparison of NiAl precipitation in a medium carbon secondary hardening steel and C-free PH13-8 maraging steel
resolves10.1023/A:1004346412079
The formation of reverted austenite in 18% Ni 350 grade maraging steel
The 5 references without a DOI — listed, not checked
no DOI — not checkedR. F. Decker, J. T. Eash, and A. J. Goldman, “18% nickel maraging steel,” ASM Trans. Quart., 55, 58 – 76 (1962).
no DOI — not checkedA. M. Hall and C. J. Slunder, “The metallurgy, behavior, and application of the 18-percent nickel maraging steels: A survey,” in: NASA Tech. Rpt. No. NASA-SP-5051, Jan. (1968).
no DOI — not checkedC. V. Rooyen, H. P. Burge, P. Kazadi, and C. Kriek, “Comparison of CO2 and Nd:YAG laser welding of Grade 250 maraging steel,” in: 59th Annual Assembly Int. Inst. of Welding (IIW Doc. II-A-173-06), Canada, Sep. (2006), p. 9.
no DOI — not checkedA. J. Abdalla, R. M. Anazawa, M. S. Pereira, and T. M. Hashimoto, “Effect of intercritical and isothermal treatments over the mechanical properties and microstructure of 300M steel,” Braz. Mag. Vacuum Appl., 25(2), 93 – 97 (2006).
no DOI — not checkedBilal Ahmed, Fawad Tariq, Nausheen Naz, and Rasheed Ahmed Baloch, “How multiple impact repair impact maraging steel,” Welding J., 91(9), 38, Oct. (2012).
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1007/s11041-020-00535-y"><img src="https://citestamp.com/citestamped/10.1007/s11041-020-00535-y/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1007/s11041-020-00535-y)