Reference health
Effects of temperature and acid solution on the physical and tensile mechanical properties of red sandstones
57/57 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
5 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 57 checked references that resolve
resolves10.1016/j.enggeo.2013.10.012
Temperature influence on the physical and mechanical properties of a porous rock: San Julian's calcarenite
resolves10.1007/s00603-017-1179-1
Direct Shear Tests of Sandstone Under Constant Normal Tensile Stress Condition Using a Simple Auxiliary Device
resolves10.1007/s00603-020-02070-x
Direct Tensile Behavior of Limestone and Sandstone with Bedding Planes at Different Strain Rates
resolves10.1016/j.tafmec.2020.102512
Effect of wetting–drying cycles on mode I and mode II fracture toughness of sandstone in natural (pH = 7) and acidic (pH = 3) environments
resolves10.1016/j.conbuildmat.2010.12.055
Effects of calcination temperature of kaolinite clays on the properties of geopolymer cements
resolves10.1016/j.clay.2014.07.024
High temperature phase evolution of Bolivian kaolinitic–illitic clays heated to 1250°C
resolves10.1016/j.ijrmms.2006.07.012
Experimental study of limestone micro-fracturing under a coupled stress, fluid flow and changing chemical environment
resolves10.1016/S1365-1609(03)00059-5
Real-time computerized tomography (CT) experiments on sandstone damage evolution during triaxial compression with chemical corrosion
resolves10.1016/j.ijrmms.2008.08.001
Multi-crack interaction in limestone subject to stress and flow of chemical solutions
resolves10.1016/j.tca.2018.06.018
Effects of high temperature treatment on physical-thermal properties of clay
resolves10.1016/j.clay.2010.06.002
Thermal conductivity of fired clays: Effects of mineralogical and physical properties of the raw materials
resolves10.1016/j.applthermaleng.2016.09.168
Experimental study on thermophysical properties of clay after high temperature
resolves10.1016/j.conbuildmat.2018.06.137
The thermodynamic properties variation of cemented clay after treatment at high temperatures
resolves10.1007/s00603-020-02094-3
Comparative Investigation on the Compression–Shear and Tension–Shear Behaviour of Sandstone at Different Shearing Rates
resolves10.1007/s00603-020-02136-w
Experimental Investigation on Shear Mechanical Behavior of Sandstone Containing a Pre-existing Flaw Under Unloading Normal Stress with Constant Shear Stress
resolves10.1155/2018/3283907
Experimental Study on Physicochemical and Mechanical Properties of Mortar Subjected to Acid Corrosion
resolves10.1016/j.scitotenv.2019.03.457
Groundwater depletion and contamination: Spatial distribution of groundwater resources sustainability in China
resolves10.1016/j.fuel.2018.05.040
Hydraulic fracturing under high temperature and pressure conditions with micro CT applications: Geothermal energy from hot dry rocks
resolves10.1016/j.ijfatigue.2018.03.022
Experimental investigation on the micro damage evolution of chemical corroded limestone subjected to cyclic loads
resolves10.1016/j.ijrmms.2018.07.011
Micro-damage evolution and macro-mechanical property degradation of limestone due to chemical effects
resolves10.1155/2018/6289721
Load Transfer Mechanism of Hybrid Pylon Joint with Cells and Bearing Plates
resolves10.1016/j.ijrmms.2019.104079
Effect of acid-temperature-pressure on the damage characteristics of sandstone
resolves10.1016/j.coldregions.2019.03.012
Damage evolution model of sandstone under coupled chemical solution and freeze-thaw process
resolves10.1016/j.enggeo.2014.11.013
An experimental study on the physico-mechanical properties of two post-high-temperature rocks
resolves10.1007/s10064-017-1196-z
Micro/macro physical and mechanical variation of red sandstone subjected to cyclic heating and cooling: an experimental study
resolves10.1007/s11771-014-2051-z
Strength failure and crack coalescence behavior of sandstone containing single pre-cut fissure under coupled stress, fluid flow and changing chemical environment
resolves10.1007/s10230-020-00687-6
Water–Sediment Two-Phase Flow Inrush Hazard in Rock Fractures of Overburden Strata During Coal Mining
resolves10.32604/cmc.2020.011430
A Numerical Gas Fracturing Model of Coupled Thermal, Flowing and Mechanical Effects
resolves10.1016/j.chemosphere.2020.128400
Reutilization of gangue wastes in underground backfilling mining: Overburden aquifer protection
resolves10.1016/j.ijrmms.2016.07.002
Damage effects and mechanisms in granite treated with acidic chemical solutions
resolves10.1016/j.clay.2018.04.003
Mineralogical evolution of ceramic clays during heating. An ex/in situ X-ray diffraction method comparison study
resolves10.1007/s00269-005-0008-3
Temperature variation of elastic constants of quartz across the α - β transition
resolves10.1007/s10064-018-1375-6
Acoustic emission characteristics of a fine-grained marble with different thermal damages and specimen sizes
resolves10.1007/s10706-015-9878-4
Slaking Process and Mechanisms Under Static Wetting and Drying Cycles Slaking Tests in a Red Strata Mudstone
resolves10.1016/j.enggeo.2012.09.007
Transformation plasticity and the effect of temperature on the mechanical behaviour of Hawkesbury sandstone at atmospheric pressure
resolves10.1016/j.tust.2018.10.008
Statistical analysis of fire accidents in Chinese highway tunnels 2000–2016
resolves10.1007/s00603-019-01871-z
Effect of Open-Fire-Induced Damage on Brazilian Tensile Strength and Microstructure of Granite
resolves10.1007/s00603-020-02200-5
Experimental Evaluation of Physical and Mechanical Properties of Geothermal Reservoir Rock after Different Cooling Treatments
resolves10.1016/j.chemosphere.2018.04.060
Groundwater chemistry and human health risk assessment in the mining region of East Singhbhum, Jharkhand, India
resolves10.1016/j.enggeo.2017.06.010
Thermal alterations in the poro-mechanical characteristic of an Indian sandstone – A comparative study
resolves10.1016/j.applthermaleng.2017.01.026
Temperature effect on microstructure and P-wave propagation in Linyi sandstone
resolves10.1007/s10704-011-9655-1
Analysis of the diametral compression method for determining the tensile strength of transparent magnesium aluminate spinel
resolves10.1016/j.ijrmms.2014.04.014
Physical and mechanical behavior of claystone exposed to temperatures up to 1000 °C
resolves10.1016/j.enggeo.2015.01.026
Influence of mineralogy on granite decay induced by temperature increase: Experimental observations and stress simulation
resolves10.1016/j.ijhydene.2020.01.222
Unsteady seepage solutions for hydraulic fracturing around vertical wellbores in hydrocarbon reservoirs
resolves10.1016/j.ijplas.2006.03.002
Elastoplastic deformation of a porous rock and water interaction
resolves10.1016/j.ijrmms.2011.04.015
Influences of chemical degradation on mechanical behaviour of a limestone
resolves10.1016/j.coldregions.2019.03.008
Experimental investigation of the time-dependent behavior of quartz sandstone and quartzite under the combined effects of chemical erosion and freeze–thaw cycles
resolves10.1016/j.tafmec.2020.102620
Experimental study on the dynamic fracture mechanical properties of limestone after chemical corrosion
resolves10.1080/19475705.2020.1734102
Experimental investigation on mining-induced strain and failure characteristics of rock masses of mine floor
resolves10.1007/s00603-018-1404-6
Effect of Thermal Treatment on Brazilian Tensile Strength of Granites with Different Grain Size Distributions
resolves10.3390/geosciences9060273
Classification of Red-Bed Rock Mass Structures and Slope Failure Modes in South China
resolves10.1016/j.ijrmms.2005.06.008
Numerical simulation of Brazilian disk rock failure under static and dynamic loading
resolves10.1016/j.ijthermalsci.2017.01.008
Thermally induced variation of primary wave velocity in granite from Yantai: Experimental and modeling results
The 5 references without a DOI — listed, not checked
no DOI — not checkedHuo RK, Li SG, Han F, Li J (2018b) Experimental study on the characteristics of sandstone subjected to acid corrosion. IOP Conference Series: Earth and Environmental Science 153:022031
no DOI — not checkedLiao J, Zhao Y, Liu Q, Tang L (2020) Experimental study on shear strength characteristics of limestone under acidizing corrosion. Journal of Mining & Safety Engineering 37(3):639–646
no DOI — not checkedUlusay R, Hudson JA (2007) The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974–2006. ISRM Commission on Testing Methods, Ankata
no DOI — not checkedXu J, Wu H, Cheng L, Liu J, Zhou W (2012) Experimental study of shearing failure properties of sandstone under acidic conditions. Chin J Rock Mech Eng 31(2):3897–3903
no DOI — not checkedYao H, Feng X, Cui Q, Zhou H (2009) Meso-mechanical experimental study of meso-fraeturing process of limestone under coupled chemical corrosion and water pressure. Rock Soil Mech 30(1):59–66
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1007/s11356-020-11866-x"><img src="https://citestamp.com/citestamped/10.1007/s11356-020-11866-x/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1007/s11356-020-11866-x)