Reference health
Hydrogen trap states in ultrahigh-strength AERMET 100 steel
48/48 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
35 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 48 checked references that resolve
resolves10.1006/obhd.1997.2731
Sensitivity and Bias in Covariation Detection: A Direct Approach to a Tangled Issue
resolves10.1007/BF02666329
Transmission Electron Microscopy Examination of Hardening and Toughening Phenomena in Aermet 100
resolves10.1007/BF02595438
M2C precipitates in isothermal tempering of high Co-Ni secondary hardening steel
resolves10.1007/s11661-003-0334-3
Internal hydrogen embrittlement of ultrahigh-strength AERMET 100 steel
resolves10.1007/BF02662593
Crack growth from internal hydrogen—temperature and microstructural effects in 4340 steel
resolves10.5006/0010-9312-24.10.313
Techniques for Investigating Hydrogen-Induced Cracking of Steels With High Yield Strength
resolves10.1520/STP45294S
A Study of the Effect of Voids on Hydrogen Diffusion Through Electroslag Refined Steel
resolves10.1520/STP45314S
Quantitative Analysis of Critical Concentrations for Hydrogen-Induced Cracking
resolves10.1007/s11661-001-0265-9
Hydrogen thermal desorption relevant to delayed-fracture susceptibility of high-strength steels
resolves10.1007/BF02670375
The role of aging reactions in the hydrogen embrittlement susceptibility of an HSLA steel
resolves10.1007/BF02665009
The influence of palladium on the hydrogen-assisted cracking resistance of PH 13-8 Mo stainless steel
resolves10.1007/s11661-000-0064-8
The identification of hydrogen trapping states in an Al-Li-Cu-Zr alloy using thermal desorption spectroscopy
resolves10.1016/S0022-3115(99)00099-9
Internal friction study of hydrogen behaviour in low activated martensitic F82H steel
resolves10.1007/s11661-002-0032-6
Trap-governed hydrogen diffusivity and uptake capacity in ultrahigh-strength AERMET 100 steel
resolves10.2320/jinstmet1952.55.12_1283
Effect of Substitutional Alloying Elements (Al, Si, V, Cr, Mn, Co, Ni, Mo) on the Diffusion Coefficient of Hydrogen in α-Iron
resolves10.5006/0010-9312-32.5.179
Hydrogen Diffusion Coefficients in Ferrovac 1020 and Cr-Mo Alloy Steels
resolves10.1007/BF02645009
On the effective hydrogen permeability in metastable beta titanium alloy, niobium and 2.25CM Mo ferritic steel
resolves10.1016/0956-7151(92)90436-I
Hydrogen detrapping from grain boundaries and dislocations in high purity iron
resolves10.1016/0036-9748(83)90242-9
The measurement of the trap binding energy by the thermal analysis technique
resolves10.1007/BF02643751
Discussion of “Permeation Measurements of Hydrogen Trapping in 1045 Steel”
resolves10.1007/BF00543835
The interaction of hydrogen and the cementite-ferrite interface in carbon steel
resolves10.1016/0001-6160(77)90131-6
On the elastic interaction of hydrogen with precipitates in lath martensite
resolves10.1016/S0022-3115(97)00021-4
Influence of traps on the deuterium behaviour in the low activation martensitic steels F82H and Batman
resolves10.5006/0010-9312-36.2.53
Hydrogen Trapping in BCC Fe-Cr Alloys (7 ~ 9.4 Wt% Cr) as Studied by Microautoradiography—Contribution of Carbon-Hydrogen Interaction—Consequences on Hydrogen Cracking
resolves10.1007/BF02652345
Microstructural basis for the effect of chromium on the strength and toughness of AF1410-based high performance steels
resolves10.1007/s11661-998-0280-1
On the characteristics of M2C carbides in the peak hardening regime of AerMet 100 steel
resolves10.1007/BF02649489
Correlation of microstructural Parameters and Hydrogen Permeation in Carbon Steel
resolves10.1080/01418619108204854
The necessity of both plasticity and brittleness in the fracture thresholds of iron
resolves10.1016/S0013-7944(00)00119-3
Nanomechanical probes as new approaches to hydrogen/deformation interaction studies
resolves10.1007/BF03350949
The kinetics and micromechanics of hydrogen assisted cracking in Fe-3 pct Si single crystals
resolves10.1016/S0022-5096(97)00018-5
Steady-state crack growth and work of fracture for solids characterized by strain gradient plasticity
resolves10.1007/s11661-999-0203-9
The equilibrium concentration of hydrogen atoms ahead of a mixed mode I-Mode III crack tip in single crystal iron
resolves10.1016/0956-716X(92)90152-5
The influence of cohesive forces on the equilibrium concentration of hydrogen atoms ahead of a crack tip in single crystal iron
The 35 references without a DOI — listed, not checked
no DOI — not checkedM.G.H. Wells: Key Eng. Mater., 1993, vols. 77–78, pp. 71–80.
no DOI — not checkedR.M. Hemphill and D.E. Wert: U.S. Patent Number 5,087,415, Carpenter Technology Corporation, Reading, PA, Feb. 11, 1992.
no DOI — not checkedW.M. Garrison, Jr.: J. Met., 1990, vol. 46, pp. 20–24.
no DOI — not checkedC.J. Kuehmann: Ph.D. Dissertation, Northwestern University, Evanston, IL, 1994.
no DOI — not checkedG.B. Olson: Innovations in Ultra-High Strength Steel Technology, 34th Sagamore Army Materials Conf., United States Army Laboratory Command, Watertown, MA, 1987, pp. 3–65.
no DOI — not checkedE.U. Lee, H. Sanders, and B. Sarkar: in Proc. Tri-Service Conf. on Corrosion, J.V. Kelley and B. Placzankis, eds., Army Research Laboratory, Aberdeen, MD, 2000, CD file S08p2a.pdf.
no DOI — not checkedP. Buckley, B. Placzankis, J. Beatty, and R. Brown: Corrosion/94, NACE, Houston, TX, 1994, paper no. 547.
no DOI — not checkedP.F. Buckley, R. Brown, G.H. Graves, E.U. Lee, C.E. Neu, and J. Kozol: Metallic Materials for Lightweight Applications, 40th Sagamore Army Materials Research Conf., M.G.H. Wells, E.B. Kula, and J.H. Beatty, eds., United States Army Laboratory Command, Watertown, MA, 1993, pp. 377–88.
no DOI — not checkedJ.B. Boody and V.S. Agarwala: Corrosion/87, NACE, Houston, TX, 1987, paper no. 224.
no DOI — not checkedD.A. Berman: Mater. Performance, 1985, vol. 24, pp. 36–41.
no DOI — not checkedG.N. Vigilante, J.H. Underwood, and D. Crayton: in Fatigue and Fracture Mechanics, Proc. 30th Nat. Symp., ASTM STP 1360, ASTM International, West Conshohocken, PA, 2000, pp. 377–87.
no DOI — not checkedH.H. Johnson and R.W. Lin: in Hydrogen Effects in Metals, I.M. Bernstein and A.W. Thompson, eds., TMS, Warrendale, PA, 1980, pp. 3–25.
no DOI — not checkedG.M. Evans and E.C. Rollason: J. Iron Steel Inst., 1969, vol. 207, pp. 1591–98.
no DOI — not checkedG.M. Pressouyre: in Hydrogen Effects in Metals, I.M. Bernstein and A.W. Thompson, eds., TMS, Warrendale, PA, 1981, pp. 27–36.
no DOI — not checkedK. Yamakawa, S. Yonezawa, and S. Yoshizawa: in International Congress on Metallic Corrosion, National Research Council, Toronto, 1984, pp. 254–61.
no DOI — not checkedR.P. Gangloff: in Corrosion Prevention and Control, M. Levy and S. Isserow, eds., United States Army Materials Technology Laboratory, Watertown, MA, 1986, pp. 64–111.
no DOI — not checkedB.G. Pound: Acta Metall., 1998, vol. 46, pp. 5733–43.
no DOI — not checkedA. McNabb and P.K. Foster: Trans. AIME, 1963, vol. 227, 618–27.
no DOI — not checkedAlloy Data-AERMET 100 Alloy, Carpenter Steel Division, Carpenter Technology Corporation, reading, PA, 1992.
no DOI — not checkedJ. Crank: The Mathematics of Diffusion, Oxford University Press, Inc., New York, NY, 1975, p. 414.
no DOI — not checkedP. Shewmon: Diffusion in Solids, TMS, Warrendale, PA, 1989, pp. 9–51.
no DOI — not checkedJ. Völkl and G. Alefeld: in Hydrogen in Metals 1—Basic Properties, G. Alefeld and J. Völkl, eds., Springer-Verlag, New York, NY, 1978, pp. 26–29.
no DOI — not checkedD.P. Woodruff and T.A. Delchar: Modern Techniques of Surface Science, Cambridge University Press, Cambridge, United Kingdom, 1986, p. 284.
no DOI — not checkedJ.Y. Lee, J.L. Lee, and W.Y. Choo: in Current Solutions to Hydrogen Problems in Steels, ASM, Metals Park, OH, 1982, pp. 423–27.
no DOI — not checkedI.M. Bernstein and G.M. Pressouyre: in Hydrogen Degradation of Ferrous Alloys, R.A. Oriani, J.P. Hirth, and M. Smialowski, eds., Noyes Publications, Park Ridge, NJ, 1985, pp. 641–711.
no DOI — not checkedR. Gibala and A.J. Kumnick: in Hydrogen Embrittlement and Stress Corrosion Cracking, R. Gibala and R.F. Hehemann, eds., ASM International, Materials Park, OH, 1984, pp. 61–77.
no DOI — not checkedG.M. Pressouyre: in Current Solutions to Hydrogen Problems in Steels, C.G. Interrante and G.M. Pressouyre, eds., ASM International, Materials Park, OH, 1982, pp. 18–34.
no DOI — not checkedJ.S. Montgomery and G.B. Oslon: in Gilbert R. Speich Symp. on the Fundamentals of Aging and Tempering in Bainitic and Martensitic Steel Products, Proc. 34th MSWP Conf., ISS-AIME, Warrendale, PA, 1992, pp. 177–214.
no DOI — not checkedG. Krauss: Steels, Heat Treatment and Processing Principles, ASM INTERNATIONAL, Materials Park, OH, 1990, p. 75.
no DOI — not checkedH. Hänninen, Y. Yagodzinskyy, O. Tarasenko, P. Castello, and J.-P. Schosger: in Hydrogen Effects in Materials, N.R. Moody and A.W. Thompson, eds., TMS, Warrendale, PA, 2003, in press.
no DOI — not checkedR.P. Gangloff: in Hydrogen Effects in Materials, N.R. Moody and A.W. Thompson, eds., TMS, Warrendale, PA, 2003, in press.
no DOI — not checkedR.A. Oriani: in Fundamental Aspects of Stress Corrosion Cracking, NACE, Houston, TX, 1969, pp. 32–50.
no DOI — not checkedW.C. Johnson and J.Y. Huh: Metall. Mater. Trans., 2003, in press.
no DOI — not checkedT.L. Anderson: Fracture Mechanics: Fundamentals and Applications, 2nd ed., CRC Press, Boca Raton, FL, 1995, pp. 117–81.
no DOI — not checkedD. Li, R.P. Gangloff, and J.R. Scully: Hydrogen Diffusion and Trapping Behavior in Ultrahigh Strength AERMET 100 Steel, University of Virginia, Charlottesville, VA, 2002.
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1007/s11661-004-0011-1"><img src="https://citestamp.com/citestamped/10.1007/s11661-004-0011-1/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1007/s11661-004-0011-1)