Reference health
Effect of Yttrium Alloying on Intermediate to High-Temperature Oxidation Behavior of Mo-Si-B Alloys
38/38 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
6 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 38 checked references that resolve
resolves10.1111/j.1151-2916.1996.tb09046.x
Isothermal Oxidation Behavior of Mo‐Si‐B Intermetallics at 1450°C
resolves10.1111/j.1151-2916.1996.tb08528.x
Oxidation Behavior of Boron‐Modified Mo
<sub>5</sub>
Si
<sub>3</sub>
at 800°–1300°C
resolves10.1016/S0966-9795(98)00058-2
Oxide scale formation and isothermal oxidation behavior of Mo–Si–B intermetallics at 600–1000°C
resolves10.1016/S0921-5093(02)00446-X
Effects of microstructure on the oxidation behavior of multiphase Mo–Si–B alloys
resolves10.1016/S0966-9795(01)00118-2
Oxidation behavior of αMo–Mo3Si–Mo5SiB2 (T2) three phase system
resolves10.1016/j.intermet.2007.02.012
Oxidation behaviour of the Mo–Si–B and Mo–Si–B–Al alloys in the temperature range of 700–1300°C
resolves10.1007/s11085-009-9175-9
Effect of Zr Addition on the High-Temperature Oxidation Behaviour of Mo–Si–B Alloys
resolves10.1016/S0010-938X(65)80026-9
The effect of yttrium on the high temperatureoxidation resistance of some Fe-Cr base alloys in carbon dioxide
resolves10.1007/BF00604042
The effect of yttrium and thorium on the oxidation behavior of Ni-Cr-Al alloys
resolves10.1023/A:1018894711276
The Oxidation Behavior of Oxide-Dispersed β-NiAl: I. Short-Term Performance at 1200°C
resolves10.1023/A:1018891211160
The Effect of Lanthanum on the Scales Developed on Thin Foils of Fe-20Cr-5Al at Very High Temperatures
resolves10.1111/j.1151-2916.2003.tb03358.x
Optimization of Reactive‐Element Additions to Improve Oxidation Performance of Alumina‐Forming Alloys
resolves10.1007/BF01046818
Experimental observations in support of the dynamic-segregation theory to explain the reactive-element effect
resolves10.1016/j.actamat.2007.07.007
Effect of reactive element oxide inclusions on the growth kinetics of protective oxide scales
resolves10.1007/s11661-007-9342-z
Correlation between the Microstructure, Growth Mechanism, and Growth Kinetics of Alumina Scales on a FeCrAlY Alloy
resolves10.1098/rsta.1980.0124
Improvements in high temperature oxidation resistance by additions of reactive elements or oxide dispersions
resolves10.1111/j.1151-2916.1999.tb01810.x
Variation of the Oxidation Rate of Silicon Carbide with Water‐Vapor Pressure
resolves10.1111/j.1151-2916.1999.tb02005.x
SiC Recession Caused by SiO
<sub>2</sub>
Scale Volatility under Combustion Conditions: II, Thermodynamics and Gaseous‐Diffusion Model
resolves10.1111/j.1151-2916.2003.tb03328.x
Microstructural Changes in Liquid‐Phase‐Sintered Silicon Carbide during Creep in an Oxidizing Environment
resolves10.1177/0021998311414071
Photopolymerization experiments and properties of some urethane/urea methacrylates tested in dental composites
resolves10.1016/j.carbon.2004.05.005
A new SiC/yttrium silicate/glass multi-layer oxidation protective coating for carbon/carbon composites
resolves10.1016/j.ceramint.2005.03.018
Yttrium silicate oxidation protective coating for SiC coated carbon/carbon composites
resolves10.1016/j.intermet.2004.03.006
Characterization of an industrially processed Mo-based silicide alloy
resolves10.1016/j.actamat.2009.05.013
Densification and grain growth during isothermal sintering of Mo and mechanically alloyed Mo–TZM
resolves10.1080/01418618208236942
Enhanced diffusion of oxygen during internal oxidation of nickel-base alloys
The 6 references without a DOI — listed, not checked
no DOI — not checkedM. Heilmaier, M. Kruger, H. Saage, J. Rosler, D. Mukherji, U. Glatzel, R. Volkl, R. Huttner, G. Eggeler, Ch. Somsen, T. Depka, H. –J. Christ, B. Gorr, and S. Burk: J. Metals, 2009, vol. 67, pp. 61-67.
no DOI — not checkedE. W. Lee, J. Cook, A. Khan, R. Mahapatra, and J. Waldman: J. Metals, 1991, vol. 43, pp. 54-57.
no DOI — not checkedD.M. Berczik: U.S. Patent No. 5.693.156, 1997.
no DOI — not checkedD.M. Berczik: U.S. Patent No. 5.695.616, 1997.
no DOI — not checkedP. D. Sarkisov, L. A. Orlova, N. V. Popovich, and Yu. E. Ananeva: Glass Ceram., 2007, vol. 64, pp. 1-6.
no DOI — not checkedC. Wagner: Z. Elekrochem., 1959, vol. 63, pp. 772-80.
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1007/s11661-012-1589-3"><img src="https://citestamp.com/citestamped/10.1007/s11661-012-1589-3/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1007/s11661-012-1589-3)