Reference health
Microstructural Evolutions During Thermal Aging of Alloy 625: Impact of Temperature and Forming Process
40/40 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
9 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 40 checked references that resolve
resolves10.1007/BF02670621
Influence of heat treatments on microstructure, mechanical properties, and corrosion resistance of weld alloy 625
resolves10.7449/2005/Superalloys_2005_409_418
Alloys 625 and 725: Trends in Properties and Applications
resolves10.7449/1991/Superalloys_1991_409_422
Influence of Heat Treatments on Microstructure, Mechanical Properties and Corrosion Behaviour of Alloy 625 Forged Rod
resolves10.7449/2005/Superalloys_2005_271_286
The Use and Performance of Wrought 625 Alloy in Primary Surface Recuperators for Gas Turbine Engines
resolves10.1016/S0022-3115(00)00723-6
Microstructure and mechanical properties of Inconel 625 superalloy
resolves10.1007/s11661-999-0194-6
Precipitation of an intermetallic phase with Pt2Mo-type structure in alloy 625
resolves10.1016/0308-0161(94)90140-6
The performance of Alloy 625 in long-term intermediate temperature applications
resolves10.1016/S1359-6462(01)00965-4
Room temperature tensile behavior of service exposed and thermally aged service exposed alloy 625
resolves10.7449/2001/Superalloys_2001_367_378
Influence of Intermetallic Phase Precipitation During Prolonged Service in Alloy 625 on Its Properties
resolves10.7449/1991/Superalloys_1991_217_228
Microstructural Evolution During Thermomechanical Processing of Alloy 625
resolves10.7449/1991/Superalloys_1991_363_374
Effect of the Elevated-Temperature-Precipitation in Alloy 625 on Properties and Microstructure
resolves10.7449/2005/Superalloys_2005_487_495
A Comparison of the Precipitation Kinetics of γ" Particles in Virgin and Re-Solutioned Alloy 625
resolves10.7449/1994/Superalloys_1994_635_647
Effects of Long-Time Exposure in Alloy 625 at 12OO�F, 1400�F and 1600�F
resolves10.7449/1994/Superalloys_1994_405_418
Some Aspects of the Heterogeneous Precipitation of the Metastable γ" Phase in Alloy 625
resolves10.7449/1997/Superalloys_1997_447_458
Microstructural and Mechanical Property Characterization of Aged Inconel Alloy 625LCF
resolves10.1016/j.msea.2008.08.017
Microstructure evolution of alloy 625 foil and sheet during creep at 750°C
resolves10.7449/1994/Superalloys_1994_479_488
Effect of Carbon Content and Other Variables on Yield Strength, Ductility and Creep Properties of Alloy 625
resolves10.7449/1997/Superalloys_1997_795_803
The Effect of Final Heat Treatment and Chemical Composition on Sensitization, Strength and Thermal Stability of Alloy 625
resolves10.7449/2001/Superalloys_2001_35_46
Alloy 625: Impressive Past/Significant Presence/Awesome Future
resolves10.7449/1997/Superalloys_1997_367_378
Carbide Precipitation in Nickel Base Superalloys 718 and 625 and Their Effect on Mechanical Properties
resolves10.7449/1991/Superalloys_1991_509_517
Optimization of the Fatigue Properties of Inconel Alloy 625
resolves10.1016/j.msea.2010.11.088
Effect of thermal exposure on the stability of carbides in Ni–Cr–W based superalloy
resolves10.1007/s10853-007-1645-3
Effect of very high temperature short exposures on the dissolution of the γ′ phase in single crystal MC2 superalloy
resolves10.1016/0022-3697(61)90054-3
The kinetics of precipitation from supersaturated solid solutions
resolves10.1016/j.matchar.2010.02.011
Some features of anisothermal solid-state transformations in alloy 718
resolves10.1515/pm-1971-080903
Das Ausscheidungs- und Rekristallisationsverhalten der Nickelbasislegierung Inconel 625/ The Precipitation and Recrystallization Behaviour of the Nickel-Base-Alloy Inconel 625
resolves10.1016/j.msea.2012.03.092
Precipitation behavior of grain boundary M23C6 and its effect on tensile properties of Ni–Cr–W based superalloy
resolves10.1016/j.jallcom.2012.08.069
Injection molding of nickel based 625 superalloy: Sintering, heat treatment, microstructure and mechanical properties
resolves10.7449/2005/Superalloys_2005_135_154
The Role of Niobium in Wrought Precipitation-Hardened Nickel-Base Alloys
resolves10.1016/j.actamat.2004.01.011
The formation of precipitate free zones along grain boundaries in a superalloy and the ensuing effects on its plastic deformation
The 9 references without a DOI — listed, not checked
no DOI — not checkedG.F. Vander Voort, J.W. Bowman, and R.B. Frank: Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Pittsburgh, PA, 1994, pp. 489–98.
no DOI — not checkedL. Mataveli Suave: M.Sc. Dissertation, ISAE-ENSMA, 2012.
no DOI — not checkedJ.R. Vaunois, J. Cormier, P. Villechaise, A. Devaux, and B. Flageolet: The Ith International Symposium on Superalloy 718 and Derivatives, E.A. Ott, J.R. Groh, A. Banik, I. Dempster, T.P. Gabb, R. Helmink, X. Liu, A. Mitchell, G. Sjöberg, and A. Wusatowska-Sarnek, eds., TMS, Pittsburgh, PA, 2010, pp. 199–213.
no DOI — not checkedC. Wagner: Zeit. Elektro., 1961, vol. 65, pp. 581-91.
no DOI — not checkedA. Niang: Ph.D. Dissertation, Université de Toulouse, 2010.
no DOI — not checkedM. Sundararaman, P. Mukhopadhyay, and S. Banerjee: Metall. Trans. A, 1988, vol. 19A, pp. 454-65.
no DOI — not checkedA. Devaux: Ph.D. Dissertation, Ecole Nationale Supérieure des Mines de Paris, 2007.
no DOI — not checkedJ.R. Crum, M.E. Adkins, and W.G. Lipscomb: The National Association of Corrosion Engineers, Paper No. 208, Houston, Texas, 1986.
no DOI — not checkedF. Taina, M. Pasqualon, V. Velay, D. Delagnes, and P. Lours: in the 7th International Symposium on Superalloy 718 and Derivatives, E.A. Ott, J.R. Groh, A. Banik, I. Dempster, T.P. Gabb, R. Helmink, X. Liu, A. Mitchell, G. Sjöberg, and A. Wusatowska-Sarnek, eds., TMS, Pittsburgh, PA, 2010, pp. 893–905.
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1007/s11661-014-2256-7"><img src="https://citestamp.com/citestamped/10.1007/s11661-014-2256-7/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1007/s11661-014-2256-7)