Reference health
New Alloying Systems for Sintered Steels: Critical Aspects of Sintering Behavior
15/15 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
24 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 15 checked references that resolve
resolves10.1179/pom.1973.16.32.006
HIGH-STRENGTH SINTERED IRON-BASE ALLOYS BY USING TRANSITION METAL CARBIDES
resolves10.1016/j.apsusc.2010.01.055
Surface composition of the steel powders pre-alloyed with manganese
resolves10.1111/j.1600-0692.2004.00689.x
High‐temperature reduction of iron oxides by solid carbon or carbon dissolved in liquid iron–carbon alloy
resolves10.1016/S0254-0584(00)00422-3
Dissolution of different graphite grades during sintering of PM steels
resolves10.1016/S0254-0584(00)00419-3
Processes in PM steel compacts during the initial stages of sintering
resolves10.1016/j.matchemphys.2011.03.076
Study of the oxide reduction and interstitial contents during sintering of different plain carbon steels by in situ mass spectrometry in nitrogen atmosphere
resolves10.1016/j.apsusc.2013.12.183
Characterization of oxide on the water-atomized FeMn powder surface
resolves10.1016/j.matchar.2013.07.022
Surface phenomena during the early stages of sintering in steels modified with Fe–Mn–Si–C master alloys
resolves10.1016/j.matchemphys.2012.11.074
Effect of process parameters on surface oxides on chromium-alloyed steel powder during sintering
resolves10.1016/j.jmatprotec.2011.12.008
On-line control of processing atmospheres for proper sintering of oxidation-sensitive PM steels
The 24 references without a DOI — listed, not checked
no DOI — not checkedG. Zapf and K. Dalal, Modern Developments in Powder Metallurgy 10, 1977, pp. 129-152.
no DOI — not checkedM Jaliliziyaean, C. Gierl and H. Danninger, Advances in Powder Metallurgy & Particulate Materials 2008, vol. 5, pp. 72-78.
no DOI — not checkedH. Danninger, M. Jaliliziyaeian, C. Gierl and S. Bengtsson, Materials Science Forum 2011, vol. 672, p. 4.
no DOI — not checkedS. Banerjee, G. Schlieper, F. Thümmler and G. Zapf, Progress in Powder Metallurgy 1980, vol. 13, pp. 143-157.
no DOI — not checkedG. Schlieper and F. Thummler: Powder Metall. Int. 1979, pp. 172, 174–76.
no DOI — not checkedP. Jones and R. Lawcock: Stackpole Limited, US, 1997.
no DOI — not checkedP. Jones and R. Lawcock: Stackpole Limited, US, 1999.
no DOI — not checkedF. Castro, M. Sarasola, F. Baumgaertner, M. Dougan, S. Mitchell, K. Lipp, H.J. Bender, C. Coffin, and J. Dunkley: EuroPM2005, EPMA, ed. EPMA, Pragha, 2005.
no DOI — not checkedP. Beiss, Advances in Powder Metallurgy & Particulate Material 2006, vol. 1, pp. 12-20.
no DOI — not checkedS. Sainz, V. Martinez, M. Dougan, F. Baumgaertner, and F. Castro, Adv. Powder Metall. Part. Mater., 2006, 7:pp. 95-108.
no DOI — not checkedA. N. Klein, R. Oberacker and F. Thummler, Powder Metallurgy International 1985, vol. 17, pp. 13-16.
no DOI — not checkedA. N. Klein, R. Oberacker and F. Thummler, Powder Metallurgy International 1985, vol. 17, pp. 71-74.
no DOI — not checkedA. N. Klein, R. Oberacker and F. Thummler, Modern Developments in Powder Metallurgy 1985, vol. 16, pp. 141-152.
no DOI — not checkedF. Thummler, A. Klein, and R. Oberacker: Kernforschungszent Karlsruhe, 1983.
no DOI — not checkedF. Thummler, A. Klein, and R. Oberacker: Kernforschungszent Karlsruhe, 1990.
no DOI — not checkedM.C. Abraham and A. Ghosh: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, CSIR—National Metallurgical Laboratory, Jamshedpur, 1973, pp 106–16.
no DOI — not checkedH. Danninger, C. Gierl, S. Kremel, G. Leitner, K. Jaenicke-Roessler and Y. Yu, Powder Metallurgy Progress 2002, vol. 2, pp. 125-140.
no DOI — not checkedH. Danninger, C. Gierl, G. Leitner and K. Jaenicke-Roessler, P/M Science & Technology Briefs 2004, vol. 6, pp. 10-14.
no DOI — not checkedC. Gierl, M. Jaliliziyaean, H. Danninger, and S. Berngtsson: Euro PM2009, EPMA, ed., EPMA: Copenhague, 2009, pp 305–10.
no DOI — not checkedH. Danninger, M Jaliliziyaean, C. Gierl, E. Hryha, and S. Bengtsson: World PM2010, EPMA, ed., EPMA, Florence, Italy, 2010, pp. 3–10.
no DOI — not checkedJ.E. Japka, Journal of Metals 1988, vol. 40, pp. 18-21.
no DOI — not checkedE. Hryha and E. Dudrova, Prog. Powder Metall., Pts 1-2 2007, vol. 534-536, pp. 761-764.
no DOI — not checkedB. Lindsley and W.B. James, Advances in Powder Metallurgy & Particulate Material 2010, vol. 10, pp. 36-49.
no DOI — not checkedK. Stölzel: Technik-Wörterbuch Metallurgie und Gießereitechnik: russ., dt., Verlag Technik, 1986.
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1007/s11661-014-2707-1"><img src="https://citestamp.com/citestamped/10.1007/s11661-014-2707-1/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1007/s11661-014-2707-1)