Reference health
Microstructure and Mechanical Properties of Ti-6Al-4V Rods Fabricated by Powder Compact Extrusion of TiH2/Al60V40 Powder Blend
39/39 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
3 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 39 checked references that resolve
resolves10.1016/j.matdes.2010.09.011
Titanium alloy production technology, market prospects and industry development
resolves10.1016/j.jallcom.2016.10.282
Feasibility of producing Ti-6Al-4V alloy for engineering application by powder compact extrusion of blended elemental powder mixtures
resolves10.1016/j.msea.2014.09.083
Microstructures and tensile mechanical properties of Ti–6Al–4V bar/disk fabricated by powder compact extrusion/forging
resolves10.1007/s11661-016-3333-x
Microstructures and Tensile Mechanical Properties of Titanium Rods Made by Powder Compact Extrusion of a Titanium Hydride Powder
resolves10.1007/s11661-017-3965-5
Porosity, Microstructure, and Mechanical Properties of Ti-6Al-4V Alloy Parts Fabricated by Powder Compact Forging
resolves10.1016/j.msea.2014.01.055
Microstructural evolution during extrusion of a Ti/Al/Al35V65 (Ti–6Al–4V) powder compact and the mechanical properties of the extruded rod
resolves10.1007/s11661-016-3409-7
New Powder Metallurgical Approach to Achieve High Fatigue Strength in Ti-6Al-4V Alloy
resolves10.1016/j.scriptamat.2016.11.005
New approach to achieve high strength powder metallurgy Ti-6Al-4V alloy through accelerated sintering at β-transus temperature and hydrogenation-dehydrogenation treatment
resolves10.1016/j.jallcom.2016.05.020
Preparation of strong and ductile pure titanium via two-step rapid sintering of TiH2 powder
resolves10.1016/j.scriptamat.2013.03.005
Novel fabrication of titanium by pure microwave radiation of titanium hydride powder
resolves10.1016/j.matlet.2017.01.060
Rapid synthesis of dense NiTi alloy through spark plasma sintering of a TiH2/Ni powder mixture
resolves10.1016/j.jallcom.2009.06.003
Powder sintering of porous Ti–15Mo alloy from TiH2 and Mo powders
resolves10.1016/j.msea.2009.03.024
The role of new particle surfaces in synthesizing bulk nanostructured metallic materials by powder metallurgy
resolves10.1016/j.msea.2004.09.072
Effects of working, heat treatment, and aging on microstructural evolution and crystallographic texture of α, α′, α″ and β phases in Ti–6Al–4V wire
resolves10.1016/j.compositesa.2011.11.014
Effects of extrusion and heat treatment on the microstructure and tensile properties of in situ TiBw/Ti6Al4V composite with a network architecture
resolves10.1007/s11661-015-3108-9
The Tensile Mechanical Properties of Thermomechanically Consolidated Titanium at Different Strain Rates
resolves10.1179/imr.1996.41.1.1
Effect of oxygen and hydrogen on mechanical properties of commercial purity titanium
resolves10.1007/s11661-003-0300-0
Microstructure evolution during alpha-beta heat treatment of Ti-6Al-4V
resolves10.1007/s13632-016-0319-4
The Role of Hydrogen and Other Interstitials in the Mechanical Behavior of Metals
resolves10.1016/j.jallcom.2017.05.309
Effects of the extrusion temperature on the microstructure and mechanical properties of TiBw/Ti6Al4V composites fabricated by pre-sintering and canned extrusion
resolves10.1016/j.jallcom.2012.07.022
Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
resolves10.1016/S0921-5093(98)01169-1
Property optimization through microstructural control in titanium and aluminum alloys
resolves10.1016/S1359-6454(01)00236-1
The effect of alpha platelet thickness on plastic flow during hot working of TI–6Al–4V with a transformed microstructure
resolves10.1007/s11661-998-0157-3
The role of grain size and selected microstructural parameters in strengthening fully lamellar TiAl alloys
resolves10.1016/j.msea.2007.08.051
Microstructural characteristics and mechanical properties of Ti–6Al–4V friction stir welds
resolves10.1007/s11661-003-0013-4
Effects of microstructural factors on quasi-static and dynamic deformation behaviors of Ti-6Al-4V alloys with widmanstätten structures
resolves10.1002/adem.201100269
Hydrogen Sintering of Titanium to Produce High Density Fine Grain Titanium Alloys
resolves10.1016/j.msea.2017.11.098
Solution treatment of Ti-6Al-4V alloy produced by consolidating blended powder mixture using a powder compact extrusion route
resolves10.1016/j.actamat.2007.05.009
Microstructural effects on the mechanical behavior of B-modified Ti–6Al–4V alloys
resolves10.1007/s11661-018-4695-z
A Processing Route for Achieving Isotropic Tensile Properties in Laser Solid Formed α+β Titanium Alloy
resolves10.1016/j.matdes.2009.11.032
Additive manufacturing of Ti–6Al–4V components by shaped metal deposition: Microstructure and mechanical properties
resolves10.1016/S0924-0136(01)00788-9
Thermo-mechanical processing of high strength β-titanium alloys and effects on microstructure and properties
resolves10.1016/S0921-5093(97)00612-6
Effects of lamellar spacing, volume fraction and grain size on creep strength of fully lamellar TiAl alloys
The 3 references without a DOI — listed, not checked
no DOI — not checkedG. Lütjering and J.C. Williams: Titanium, 2nd ed., Springer Berlin Heidelberg, New York, 2007, pp. 203-258.
no DOI — not checkedZ.Z. Fang, J.D. Paramore, P. Sun, K.S.R. Chandran, Y. Zhang, Y. Xia, F. Cao, M. Koopman, and M. Free: Int. Mater. Rev., 2017, pp. 1–53.
no DOI — not checkedN.J. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25-28.
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1007/s11661-019-05116-0"><img src="https://citestamp.com/citestamped/10.1007/s11661-019-05116-0/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1007/s11661-019-05116-0)