Reference health
Modeling of Rapid Solidification with Undercooling Effect During Droplet Flattening on a Substrate in Coating Formation
42/42 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
5 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 42 checked references that resolve
resolves10.1016/S0040-6090(01)01360-8
Transmission electron microscopy study of rapid solidification of plasma sprayed zirconia — part I. First splat solidification
resolves10.1016/S0040-6090(01)01361-X
Transmission electron microscopy study of rapid solidification of plasma sprayed zirconia – part II. Interfaces and subsequent splat solidification
resolves10.1016/j.ijthermalsci.2009.09.011
Modelling the nucleation process in alumina lamellae deposited on a steel substrate
resolves10.1016/j.ijheatmasstransfer.2008.08.030
A comparison of hyperbolic and parabolic models of phase change of a pure metal
resolves10.1361/105996302770348862
Splat Shapes in a Thermal Spray Coating Process: Simulations and Experiments
resolves10.1007/s10853-006-1129-x
Modeling the impact of a molten metal droplet on a solid surface using variable interfacial thermal contact resistance
resolves10.1016/j.apsusc.2014.08.032
Modeling the impact, flattening and solidification of a molten droplet on a solid substrate during plasma spraying
resolves10.1016/j.surfcoat.2014.10.047
Numerical simulation of several impacting ceramic droplets with liquid/solid phase change
resolves10.1016/j.surfcoat.2016.09.066
Effects of interfacial heat transfer, surface tension and contact angle on the formation of plasma-sprayed droplets through simulation study
resolves10.1016/j.apsusc.2014.09.159
Splat formation during plasma spraying for 8mol% yttria-stabilized zirconia droplets impacting on stainless steel substrate
resolves10.1016/0017-9310(92)90015-K
Numerical modelling of phase change and heat transfer during rapid solidification processes: use of control volume integrals with element subdivision
resolves10.1007/BF01154677
Heat transfer aspects of splat-quench solidification: modelling and experiment
resolves10.1016/S1468-6996(00)00013-9
Deformation and solidification process of a super–cooled droplet impacting on the substrate under plasma spraying conditions
resolves10.1115/1.1318208
Heat Transfer Coefficient in Rapid Solidification of a Liquid Layer on a Substrate
resolves10.1016/j.ijheatmasstransfer.2003.11.030
Numerical simulation of nucleation, solidification, and microstructure formation in thermal spraying
resolves10.1016/S0017-9310(01)00109-0
Studies of splat morphology and rapid solidification during thermal spraying
resolves10.1081/AMP-120029855
Understanding the Heat Transfer and Solidification of Plasma-Sprayed Yttria-Partially Stabilized Zirconia Coatings
resolves10.1007/s12666-012-0184-z
Porous Surfaces Via Impinging and Solidifying Molten Hollow Melt Droplets on Substrates
resolves10.1016/j.ijheatfluidflow.2012.06.004
Modelling impingement of hollow metal droplets onto a flat surface
resolves10.1007/s11666-015-0326-z
Substrate Melting and Re-solidification During Impact of High-Melting Point Droplet Material
resolves10.1016/j.applthermaleng.2009.06.026
Effects of mould filling on evolution of the solid–liquid interface during solidification
resolves10.1016/0017-9310(87)90094-9
A continuum model for momentum, heat and species transport in binary solid-liquid phase change systems—I. Model formulation
resolves10.1080/10407788808913615
ENTHALPY-POROSITY TECHNIQUE FOR MODELING CONVECTION-DIFFUSION PHASE CHANGE: APPLICATION TO THE MELTING OF A PURE METAL
resolves10.1007/BF02648528
Influence of particle parameters at impact on splat formation and solidification in plasma spraying processes
resolves10.1063/1.2355446
Influence of impact parameters of zirconia droplets on splat formation and morphology in plasma spraying
resolves10.1361/105996305X76531
In Situ Measurement System for Deformation and Solidification Phenomena of Yttria-Stabilized Zirconia Droplets Impinging on Quartz Glass Substrate under Plasma-Spraying Conditions
resolves10.1016/S0921-5093(99)00459-1
Substrate temperature effects on splat formation, microstructure development and properties of plasma sprayed coatings Part I: Case study for partially stabilized zirconia
resolves10.1016/S0921-5093(99)00461-X
Substrate temperature effects on the splat formation, microstructure development and properties of plasma sprayed coatings
resolves10.1016/S0257-8972(99)00348-5
Investigation of dominating factors on flattening behavior of plasma sprayed ceramic particles
resolves10.1007/s11666-010-9537-5
Effect of Substrate Temperature and Ambient Pressure on Heat Transfer at Interface Between Molten Droplet and Substrate Surface
The 5 references without a DOI — listed, not checked
no DOI — not checkedY.M. Liao, Y.Z. Zheng, Z.H. Zheng, and Q. Li, Numerical Simulation of Zirconia Splat Formation and Cooling During Plasma Spray Deposition, Appl. Phys. A Mater. Sci. Process., 2016, 122(7), p 1-7
no DOI — not checkedG.-X. Wang and E.F. Matthys, Modelling of Heat Transfer and Solidification during Splat Cooling: Effect of Splat Thickness and Splat/Substrate Thermal Contact, Int. J. Rapid Solidif., 1991, 6, p 141-174
no DOI — not checkedM. Pasandideh-Fard and J. Mostaghimi, On the Spreading and Solidification of Molten Particles in a Plasma Spray Process: Effect of Thermal Contact Resistance, Plasma Chem. Plasma Processing, 1996, 16(1), p 83-98
no DOI — not checkedF.B. Yeh, P.S. Wei, and S.H. Chiu, Distinct Property Effects on Rapid Solidification of a Thin Liquid Layer on a Substrate Subject to Self-consistent Melting, J. Cryst. Growth, 2003, 247(3–4), p 563-575
no DOI — not checkedJ. Mostaghimi, S. Chandra, J. Mostaghimi, and S. Chandra, Air Bubble Entrapment under an Impacting Droplet Air Bubble Entrapment under an Impacting Droplet, Phys. Fluids, 2003, 2003(173), p 173-183
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1007/s11666-017-0666-y"><img src="https://citestamp.com/citestamped/10.1007/s11666-017-0666-y/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1007/s11666-017-0666-y)