Reference health
Recent progress in thermal and optical enhancement of low temperature solar collector
155/155 checkable references clean · checked 2026-07-26
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
22 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 155 checked references that resolve
resolves10.1039/C4EE03832K
Environmental impacts of electricity generation at global, regional and national scales in 1980–2011: what can we learn for future energy planning?
resolves10.1016/j.jclepro.2015.06.066
Design for system innovations and transitions: a conceptual framework integrating insights from sustainablity science and theories of system innovations and transitions
resolves10.1016/j.jclepro.2020.120915
Energy, exergy, economic and exergoenvironmental analyses of gas and air bottoming cycles for production of electricity and hydrogen with gas reformer
resolves10.1016/j.jclepro.2020.122331
Energy, exergy and economic analyses of new coal-fired cogeneration hybrid plant with wind energy resource
resolves10.3390/app10155307
Investigation the Integration of Heliostat Solar Receiver to Gas and Combined Cycles by Energy, Exergy, and Economic Point of Views
resolves10.1016/j.solener.2019.01.039
A new version of a low concentration evacuated tube solar collector: Optical and thermal investigation
resolves10.1016/j.rser.2018.08.025
Seasonal thermal energy storage system for cold climate zones: A review of recent developments
resolves10.1016/j.solener.2019.04.056
A 50 year review of basic and applied research in compound parabolic concentrating solar thermal collector for domestic and industrial applications
resolves10.1016/j.nanoso.2019.100276
Improvement in the performance of solar collectors with nanofluids — A state-of-the-art review
resolves10.1016/j.solener.2018.03.014
Evaluation of solar collector designs with integrated latent heat thermal energy storage: A review
resolves10.1016/j.apenergy.2018.05.014
Modeling, simulation and performance analysis of parabolic trough solar collectors: A comprehensive review
resolves10.1016/j.rser.2016.11.203
Energy, exergy, environmental, enviroeconomic, exergoenvironmental (EXEN) and exergoenviroeconomic (EXENEC) analyses of solar collectors
resolves10.1016/j.rser.2013.10.023
Dynamic thermal models and CFD analysis for flat-plate thermal solar collectors – A review
resolves10.1016/j.solener.2019.09.036
Theoretical modelling approaches of heat pipe solar collectors in solar systems: A comprehensive review
resolves10.1016/j.rser.2020.109817
Humidification-dehumidification desalination systems driven by thermal-based renewable and low-grade energy sources: A critical review
resolves10.1016/j.rser.2015.10.157
Solar assisted heat pump systems for low temperature water heating applications: A systematic review
resolves10.1016/j.jclepro.2019.117825
Optimization of a novel solar-based multi-generation system for waste heat recovery in a cement plant
resolves10.1016/j.coche.2017.06.007
Incorporating low grade energy recovery in process integrated systems
resolves10.1155/2013/167895
Drying of Malaysian<i>Capsicum annuum</i>L. (Red Chili) Dried by Open and Solar Drying
resolves10.22216/jit.2015.v9i1.23
Rancang Bangun dan Kaji Eksperimental Unjuk Kerja Pengering Surya Terintegrasi dengan Tungku Biomassa untuk Mengeringkan Hasil-Hasil Pertanian
resolves10.1016/j.renene.2019.10.002
Design and performance evaluation of solar - LPG hybrid dryer for drying of shrimps
resolves10.1016/j.renene.2020.01.035
Performance analysis of a forced convection mixed mode horizontal solar cabinet dryer for drying of black ginger (Kaempferia parviflora) using two successive air mass flow rates
resolves10.1016/j.solener.2016.12.019
Economic analysis and environmental impact of flat plate roof mounted solar energy systems
resolves10.1016/j.egypro.2016.06.181
Economic Feasibility of Flat Plate vs Evacuated Tube Solar Collectors in a Combisystem
resolves10.1016/j.jclepro.2014.07.057
Life-cycle assessment of multi-crystalline photovoltaic (PV) systems in China
resolves10.1016/j.enconman.2018.08.013
Thermo-economic analysis and multi-objective optimization of absorption cooling system driven by various solar collectors
resolves10.1016/j.renene.2017.08.057
Thermoeconomic and environmental analysis of solar flat plate and evacuated tube collectors in cold climatic conditions
resolves10.1016/j.rser.2016.09.078
A review on analysis and development of solar flat plate collector
resolves10.1016/j.solener.2011.12.003
An experimental investigation on the effect of pH variation of MWCNT–H2O nanofluid on the efficiency of a flat-plate solar collector
resolves10.1016/j.solmat.2015.04.018
Design and fabrication of spectrally selective TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO tandem absorber for high-temperature solar thermal power applications
resolves10.1016/j.psep.2019.06.002
Performance augmentation of flat plate solar water collector using phase change materials and nanocomposite phase change materials: A review
resolves10.1016/j.renene.2018.05.057
Mathematical model of a thermosyphon integrated storage solar collector
resolves10.1016/j.enconman.2016.01.068
Experimental investigation of thermal performance of flat and v-corrugated plate solar air heaters with and without PCM as thermal energy storage
resolves10.1016/j.icheatmasstransfer.2016.05.009
Thermal performance enhancement of flat-plate and evacuated tube solar collectors using nanofluid: A review
resolves10.1016/j.rser.2012.03.013
Mechanisms proposed through experimental investigations on thermophysical properties and forced convective heat transfer characteristics of various nanofluids – A review
resolves10.1016/j.ijheatmasstransfer.2007.10.026
Effective viscosities and thermal conductivities of aqueous nanofluids containing low volume concentrations of Al2O3 nanoparticles
resolves10.2963/jjtp.7.227
Alteration of Thermal Conductivity and Viscosity of Liquid by Dispersing Ultra-Fine Particles. Dispersion of Al2O3, SiO2 and TiO2 Ultra-Fine Particles.
resolves10.1016/0360-5442(95)00053-J
The effect of collector aspect ratio on the collector efficiency of flat-plate solar air heaters
resolves10.1016/j.solener.2004.02.007
Thermal performance of an air solar collector with an absorber plate made of recyclable aluminum cans
resolves10.1016/j.enbuild.2004.10.011
Performance of solar systems employing collectors with colored absorber
resolves10.1016/j.renene.2011.08.056
An experimental investigation on the effect of Al2O3–H2O nanofluid on the efficiency of flat-plate solar collectors
resolves10.1016/j.expthermflusci.2012.01.025
An experimental investigation on the effect of MWCNT-H2O nanofluid on the efficiency of flat-plate solar collectors
resolves10.1016/j.apenergy.2013.04.069
A new solution for reduced sedimentation flat panel solar thermal collector using nanofluids
resolves10.3992/jgb.7.3.114
MEASUREMENT OF THE EFFICIENCY OF EVACUATED TUBE SOLAR COLLECTORS UNDER VARIOUS OPERATING CONDITIONS
resolves10.1016/j.solener.2010.05.001
All-glass vacuum tube collector heat transfer model used in forced-circulation solar water heating system
resolves10.1016/j.enconman.2015.04.028
A new desalination system using a combination of heat pipe, evacuated tube and parabolic trough collector
resolves10.1016/j.desal.2014.05.019
A solar still augmented with an evacuated tube collector in forced mode
resolves10.1016/j.apenergy.2015.06.008
Effect of the collector tilt angle on thermal efficiency and stratification of passive water in glass evacuated tube solar water heater
resolves10.1016/j.apenergy.2018.06.067
Global advancement on experimental and thermal analysis of evacuated tube collector with and without heat pipe systems and possible applications
resolves10.1016/0038-092X(76)90069-4
Optical and thermal properties of compound parabolic concentrators
resolves10.1016/0038-092X(80)90390-4
Optimization of stationary nonimaging reflectors for tubular evacuated receivers aligned north-south
resolves10.1016/S0038-092X(96)00062-X
Construction and testing of a large-area CPC-collector and comparison with a flat plate collector
resolves10.3390/en5040911
Comparative Experimental Analysis of the Thermal Performance of Evacuated Tube Solar Water Heater Systems With and Without a Mini-Compound Parabolic Concentrating (CPC) Reflector(C < 1)
resolves10.1016/j.apenergy.2013.06.051
Efficient stationary solar thermal collector systems operating at a medium-temperature range
resolves10.1016/j.enconman.2013.08.019
High temperature collecting performance of a new all-glass evacuated tubular solar air heater with U-shaped tube heat exchanger
resolves10.1016/j.apenergy.2018.02.031
Non-tracking East-West XCPC solar thermal collector for 200 celsius applications
resolves10.1016/j.egypro.2014.02.118
Performance of a 23KW Solar Thermal Cooling System Employing a Double Effect Absorption Chiller and Thermodynamically Efficient Non-tracking Concentrators
resolves10.1016/j.solener.2016.03.014
Evaluation of uniformity of solar illumination on the receiver of compound parabolic concentrator (CPC)
resolves10.1016/j.renene.2012.07.001
Study of a novel solar adsorption cooling system and a solar absorption cooling system with new CPC collectors
resolves10.1115/1.4029229
Performance of Flat-Plate and Compound Parabolic Concentrating Solar Collectors in Underfloor Heating Systems
resolves10.1016/j.apenergy.2012.11.051
A review of solar collectors and thermal energy storage in solar thermal applications
resolves10.1016/j.ijheatmasstransfer.2018.09.114
Study on the PCM flat-plate solar collector system with antifreeze characteristics
resolves10.1016/j.energy.2019.05.063
Forced-circulation solar water heating system using heat pipe-flat plate collectors: Energy and exergy analysis
resolves10.1016/j.renene.2019.04.078
Experimental investigation on flat plate solar collector using frictionally engaged thermal performance enhancer in the absorber tube
resolves10.1016/j.rser.2018.11.014
Performance enhancement analysis of The flat plate collectors: A comprehensive review
resolves10.1016/0165-1633(83)90004-7
Transparent heat-reflecting coatings for solar applications based on highly doped tin oxide and indium oxide
resolves10.1016/0038-092X(75)90001-8
Effect of cover plate treatment on efficiency of solar collectors
resolves10.1016/0306-2619(80)90054-9
Free convection and shading due to gap spacing between an absorber plate and the cover glazing in solar energy flat-plate collectors
resolves10.1002/er.4440130611
Studies on gap spacing between absorber and cover glazing in flat plate solar collectors
resolves10.1016/j.solener.2010.12.013
Simulation of an enhanced flat-plate solar liquid collector with wire-coil insert devices
resolves10.1080/08916152.2015.1124156
Tube-side heat transfer enhancement in flat-plate liquid solar collectors with wire coil inserts
resolves10.1016/j.renene.2017.10.056
Experimental investigation of Al2O3/water nanofluids on the effectiveness of solar flat-plate collectors with and without twisted tape inserts
resolves10.1016/j.renene.2019.04.007
Nanofluid flow inside a solar collector utilizing twisted tape considering exergy and entropy analysis
resolves10.1016/j.applthermaleng.2017.12.090
The role of insert devices on enhancing heat transfer in a flat-plate solar water collector
resolves10.1016/j.apenergy.2015.08.063
Optical and thermal performance of double receiver compound parabolic concentrator
resolves10.1016/j.icheatmasstransfer.2004.11.001
Effect of porous media on the performance of the double-pass flat plate solar air heater
resolves10.1016/j.renene.2008.05.027
Evaluation of thermal efficiency of double-pass solar collector with porous–nonporous media
resolves10.1016/j.ijheatmasstransfer.2013.02.037
Thermal enhancement in a flat-plate solar water collector by flow pulsation and metal-foam blocks
resolves10.1016/j.ijthermalsci.2004.03.008
Performance optimization of solar collector equipped with different arrangements of square-celled honeycomb
resolves10.1016/S0196-8904(03)00013-X
Thermal performance of flat plate solar collector using various arrangements of compound honeycomb
resolves10.1016/j.enconman.2019.01.044
A comparative study on the performance of liquid flat-plate solar collector with a new V-corrugated absorber
resolves10.1016/j.energy.2005.03.007
Performance investigation of flat plate, v-corrugated and finned air collectors
resolves10.1016/j.solener.2012.05.016
Numerically assisted analysis of flat and corrugated plate solar collectors thermal performances
resolves10.47469/JEES.2017.v03.100032
Thermal and Thermohydraulic Performance of Double Flow Flat Plate and Corrugated Absorber Solar Air Heater
resolves10.1016/S0038-092X(00)00036-0
Optimized finned absorber geometries for solar air heating collectors
resolves10.1016/j.renene.2017.12.010
Effect of wavelength and amplitude on the performance of wavy finned absorber solar air heater
resolves10.1016/j.applthermaleng.2019.03.135
Exergy, economics and pumping power analyses of flat plate solar water heater using thermal performance enhancer in absorber tube
resolves10.1016/j.solmat.2019.02.040
Experimental analysis of solar air collector with PCM-honeycomb combination under the natural convection
resolves10.1016/j.solener.2018.02.031
Experimental and numerical investigation of a solar collector/storage system with composite phase change materials
resolves10.1016/j.ijheatmasstransfer.2014.05.023
Harvesting solar thermal energy through nanofluid-based volumetric absorption systems
resolves10.1166/jnn.2015.9837
Carbon-Nanohorn Based Nanofluids for a Direct Absorption Solar Collector for Civil Application
resolves10.1016/j.enconman.2015.04.071
Progress of nanofluid application in solar collectors: A review
resolves10.1016/j.enconman.2017.10.070
Experimental investigation of flat plate solar collector using CeO 2 -water nanofluid
resolves10.1371/journal.pone.0212260
Flat plate solar collector performance using alumina nanofluids: Experimental characterization and efficiency tests
resolves10.1016/j.rser.2015.07.016
Progress and latest developments of evacuated tube solar collectors
resolves10.1016/j.solener.2011.02.001
Performance model of a novel evacuated-tube solar collector based on minichannels
resolves10.1016/j.solener.2011.03.019
Comparative studies on thermal performance of water-in-glass evacuated tube solar water heaters with different collector tilt-angles
resolves10.4314/ijest.v5i4.9
The effect of tilt angle on the performance of evacuated tube solar air collector: experimental analysis
resolves10.1016/j.solener.2014.05.023
Thermal performance and parameter analysis of a U-pipe evacuated solar tube collector
resolves10.1016/j.energy.2019.04.059
Performance of a new type of solar air collector with transparent-vacuum glass tube based on micro-heat pipe arrays
resolves10.1016/j.renene.2019.02.008
Theoretical and experimental studies of impacts of heat shields on heat pipe evacuated tube solar collector
resolves10.1016/j.rser.2017.09.050
A review on the recent research progress in the compound parabolic concentrator (CPC) for solar energy applications
resolves10.1016/j.renene.2019.01.091
Experimental analysis applied to an evacuated tube solar collector equipped with parabolic concentrator using multilayer graphene-based nanofluids
resolves10.1016/j.solener.2015.12.040
Evacuated tube solar collectors integrated with phase change materials
resolves10.1016/j.solener.2017.01.073
Effect of a low cost parabolic reflector on the charging efficiency of an evacuated tube collector/storage system with a PCM
resolves10.1016/j.renene.2017.06.054
A new mini-CPC with a U-type evacuated tube under thermal and optical investigation
resolves10.1016/j.solener.2010.11.008
Thermal performance of an open thermosyphon using nanofluids for high-temperature evacuated tubular solar collectors
resolves10.1016/j.enconman.2015.09.009
Energy performance of an evacuated tube solar collector using single walled carbon nanotubes nanofluids
resolves10.1016/j.renene.2018.01.006
Carbon nanotube nanofluid in enhancing the efficiency of evacuated tube solar collector
resolves10.1007/s10973-018-7183-1
A review of concentrating solar thermal collectors with and without nanofluids
resolves10.1016/S0196-8904(97)10020-6
Effect of two-axis sun tracking on the performance of compound parabolic concentrators
resolves10.1016/j.icheatmasstransfer.2007.09.007
An evaluation on thermal performance of CPC solar collector
resolves10.1016/j.applthermaleng.2015.04.045
Performance analysis of a novel sun-tracking CPC heat pipe evacuated tubular collector
resolves10.1016/j.applthermaleng.2017.10.167
Effect of orientation of a CPC with concentric tube on efficiency
resolves10.1016/j.apenergy.2014.06.030
Two non-tracking solar collectors: Design criteria and performance analysis
resolves10.1080/15435075.2012.727928
Preliminary Experimental Comparison of the Performance of a Novel Lens-Walled Compound Parabolic Concentrator (CPC) with the Conventional Mirror and Solid CPCs
resolves10.1016/j.apenergy.2014.03.042
Design and investigation of a novel lens-walled compound parabolic concentrator with air gap
resolves10.1080/15435075.2015.1109514
Structure optimization and annual performance analysis of the lens-walled compound parabolic concentrator
resolves10.4236/jpee.2017.53002
A Four-Wing Compound Parabolic Concentrator (CPC) Design for Heating and Sanitization of Waste Products
resolves10.1016/j.apenergy.2012.08.052
Optical efficiency study of PV Crossed Compound Parabolic Concentrator
resolves10.1016/j.energy.2019.01.119
Numerical investigation and optimization of an experimentally analyzed solar CPC
resolves10.1016/j.ijleo.2018.09.082
Design configurations and possibilities of reflector shape for solar compound parabolic collector by ray tracing simulation
resolves10.1016/j.applthermaleng.2016.01.033
Thermal performance of a new CPC solar air collector with flat micro-heat pipe arrays
resolves10.1016/j.apenergy.2012.02.059
Performance analysis and comparison of concentrated evacuated tube heat pipe solar collectors
resolves10.1016/S0196-8904(00)00113-8
Development and performance analysis of compound parabolic solar concentrators with reduced gap losses – oversized reflector
resolves10.1016/j.apenergy.2016.10.114
Energy-efficient biogas reforming process to produce syngas: The enhanced methane conversion by O2
resolves10.1016/j.applthermaleng.2019.02.063
Heat transfer performance investigation on a finned tube adsorbent bed with a compound parabolic concentrator (CPC) for solar adsorption refrigeration
resolves10.1016/j.enconman.2013.04.010
Thermal performance of an open thermosyphon using nanofluid for evacuated tubular high temperature air solar collector
The 22 references without a DOI — listed, not checked
no DOI — not checkedKalogirou, S.: McEvoy’s Handbook of Photovoltaics: Fundamentals and Applications. Academic Press, New York (2017)
no DOI — not checkedKalogirou, S.A.: Solar Energy Engineering: Processes and Systems. Academic Press, New York (2013)
no DOI — not checkedHottel, H.C.: Performance of flat-plate solar heat collectors. Trans ASME 64, 91 (1942)
no DOI — not checkedNoorpoor, A., Hamedi Jamali, D., Hashemian, N.: Optimization of parabolic trough solar collectors integrated with two stage Rankine cycle. J. Solar Energy Res. 2(2), 61–66 (2017)
no DOI — not checkedBanout, J., Ehl, P.: Using a Double-pass solar drier for drying of bamboo shoots. J. Agric. Rural Dev. Trop. Subtropics 111(2), 119–127 (2010)
no DOI — not checkedBasunia, M., Al-Handali, H., Al-Balushi, M., Rahman, M., Mahgoub, O.: Drying of fish sardines in Oman using solar tunnel dryers. J. Agric. Sci. Technol. B 1, 108–114 (2011)
no DOI — not checkedYahya, M.: Uji kinerja alat pengering lorong berbantuan pompa kalor untuk mengeringkan biji kakao. Jurnal Teknik Mesin 3(1) (2013)
no DOI — not checkedDruck, H., Heidemann, W., Muller-Steinhagen, H. Comparison test of thermal solar systems for domestic hot water preparation and space heating. In: Conference Comparison Test of Thermal Solar Systems for Domestic Hot Water Preparation and Space Heating, pp. 20–23
no DOI — not checkedHandbook A: HVAC Applications. American Society of Heating. Refrigeration and Air Conditioning Engineers Atlanta, USA (1995)
no DOI — not checkedSchweiger, H., Oliva, A., Pérez, M.C. Optimization of solar thermal absorber elements with transparent insulation (1997)
no DOI — not checkedSpäte, F., Hafner, B., Schwarzer, K.: A system for solar process heat for decentralized applications in developing countries (1999)
no DOI — not checkedIngle, P., Pawar, A., Deshmukh, B., Bhosale, K.: CFD analysis of solar flat plate collector. Int. J. Emerg. Technol. Adv. Eng. 3(4), 337–342 (2013)
no DOI — not checkedQin, L., Furbo, S. Solar heating systems with evacuated tubular solar collector. In: Conference Solar Heating Systems with Evacuated Tubular Solar Collector
no DOI — not checkedGrass, C., Benz, N., Hacker, Z., Timinger, A.: Tube collector with integrated tracking parabolic concentrator. In: Conference Tube Collector with Integrated Tracking Parabolic Concentrator, p. 327
no DOI — not checkedHan, J.-F., Tian, R., Yan, S.-Y.: Comparative analysis of the instantaneous efficiency about two types of solar collector. Energy Eng. 2 (2009)
no DOI — not checkedJack, S., Katenbrink, N., Schubert, F.: Evaluation methods for heat pipes in solar thermal collectors—test equipment and first results. In: Conference Evaluation Methods for Heat Pipes in Solar Thermal Collectors—Test Equipment and First Results, vol. 28
no DOI — not checkedO’Gallagher, J.J.: Nonimaging optics in solar energy. Synth. Lectures Energy Environ. Technol. Sci. Soc. 2(1), 1–120 (2008)
no DOI — not checkedFerahta, F., Bougoul, S., Médale, M., Abid, C.: Influence of the air gap layer thickness on heat transfer between the glass cover and the absorber of a solar collector. Fluid Dyn. Mater. Process. 8(3), 339–351 (2012)
no DOI — not checkedPalacio, M., Carmona, M.: Experimental evaluation of a latent heat thermal storage unit integrated into a flat plate solar collector as temperature stabilizer. In: Conference Experimental Evaluation of a Latent Heat Thermal Storage Unit Integrated into a Flat Plate Solar Collector as Temperature Stabilizer. IEEE, pp. 83–87
no DOI — not checkedBellos, E., Tzivanidis, C., Antonopoulos, K.A.: Optical performance and optimization of two stationary compound parabolic collectors (CPC). In: Conference Optical Performance and Optimization of Two Stationary Compound Parabolic Collectors (CPC)
no DOI — not checkedKorres, D.N., Tzivanidis, C.: A Symmetric and an Asymmetric Mini Compound Parabolic Collector Under Optical Investigation. The Role of Exergy in Energy and the Environment, pp. 649–661. Springer, Berlin (2018)
no DOI — not checkedSadeghiazad, M.M., Yahou, S. Progress in solar energy and engineering systems. Journal homepage: http://iieta.org/Journals/PSEES1(1), 10–16 (2017)
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-26 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1007/s12667-021-00473-5"><img src="https://citestamp.com/citestamped/10.1007/s12667-021-00473-5/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1007/s12667-021-00473-5)