Reference health
Investigation of Work Hardening Behavior of Inconel X-750 Alloy
34/34 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
1 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 34 checked references that resolve
resolves10.1007/s11661-997-0109-3
Strain hardening regimes and microstructural evolution during large strain compression of low stacking fault energy fcc alloys that form deformation twins
resolves10.1007/s11661-001-0109-7
The influence of stacking fault energy on the mechanical behavior of Cu and Cu-Al alloys: Deformation twinning, work hardening, and dynamic recovery
resolves10.1007/s11661-007-9356-6
Evaluation of the Role of Deformation Twinning in Work Hardening Behavior of Face-Centered-Cubic Polycrystals
resolves10.1016/j.actamat.2011.07.009
Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging
resolves10.1016/j.actamat.2016.03.015
Revealing the deformation mechanisms of Cu–Al alloys with high strength and good ductility
resolves10.1007/s10853-014-8299-8
Optimizing strength and ductility in Cu–Al alloy with recrystallized nanostructures formed by simple cold rolling and annealing
resolves10.1038/srep15488
Annual periodicity in planktonic bacterial and archaeal community composition of eutrophic Lake Taihu
resolves10.1038/srep16707
Significant contribution of stacking faults to the strain hardening behavior of Cu-15%Al alloy with different grain sizes
resolves10.1016/j.cossms.2011.04.002
High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships
resolves10.1016/0001-6160(79)90130-5
New observations on the mechanisms of dynamic strain aging and of jerky flow
resolves10.1179/1743284711Y.0000000056
Microstructural characterisation of deformation behaviour of nickel base superalloy IN625
resolves10.1111/j.1460-2695.1980.tb01111.x
EFFECT OF TEMPERATURE ON THE FATIGUE-CRACK PROPAGATION BEHAVIOUR OF INCONEL X-750
resolves10.1007/BF02654718
The deformation and fracture characteristics of inconel X-750 at room temperature and elevated temperatures
resolves10.1016/j.matdes.2013.03.081
Hot deformation and processing maps of X-750 nickel-based superalloy
resolves10.1016/0921-5093(89)90055-5
An analysis of specimen geometry effect on the creep life of inconel alloy X-750
resolves10.1016/j.msea.2012.10.095
Work hardening and aging contribution on the mechanical properties of X-750 nickel-based superalloy
resolves10.1016/0001-6160(79)90129-9
Analysis of strengthening mechanisms in alloys by means of thermal-activation theory
resolves10.4028/www.scientific.net/MSF.788.438
Uniaxial Compression Test and FEM Simulation for GH4145 Superalloy at Room Temperature
resolves10.1007/BF02644276
Concerning the analysis of tensile stress-strain data using log dσ/dεp versus log σ diagrams
resolves10.1016/j.msea.2015.11.001
Stage-II tensile work hardening behaviour of type 316L(N) austenitic stainless steel
resolves10.1016/j.ijpvp.2016.08.003
On the assessment of tensile work hardening behaviour of type 316L(N) austenitic stainless steel in the framework of θσd vs. σd using flow stress contribution from dislocations
resolves10.1016/S0921-5093(01)01032-2
Stress saturation in a nickel-base superalloy, under different aging treatments
resolves10.1007/BF02645921
Dislocation/precipitate interactions during coarsening of a plastically strained high-misfit nickel-base superalloy
resolves10.1016/j.msea.2015.03.107
Tensile flow and work hardening behaviour of type 316L(N) austenitic stainless steel in the framework of one-internal-variableand two-internal-variable approaches
resolves10.1007/s11661-013-1873-x
Tensile Work Hardening Behavior of Thin-Section Plate and Thick-Section Tubeplate Forging of 9Cr-1Mo Steel in the Framework of One-Internal-Variable Kocks–Mecking Approach
resolves10.1016/j.msea.2013.03.044
Applicability of the one-internal-variable Kocks–Mecking approach for tensile flow and work hardening behaviour of modified 9Cr–1Mo steel
resolves10.1007/s11661-999-0272-9
Influence of grain size and stacking-fault energy on deformation twinning in fcc metals
resolves10.1016/0001-6160(84)90034-8
Heterogeneous deformation of concentrated NiCr F.C.C. alloys: Macroscopic and microscopic behaviour
The 1 reference without a DOI — listed, not checked
no DOI — not checkedJ. Embury, M. Szczerba, Z. Basinski, Met. Mater. Soc. 331 (1994)
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1007/s40195-017-0607-2"><img src="https://citestamp.com/citestamped/10.1007/s40195-017-0607-2/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1007/s40195-017-0607-2)