Reference health
Coupled elasto-softening contact models in DEM to predict the in-plane response of masonry walls
35/35 checkable references clean · checked 2026-08-10
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
14 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 35 checked references that resolve
resolves10.1016/j.engfailanal.2014.10.015
Numerical analysis of structural damage in the church of the Poblet Monastery
resolves10.1061/(ASCE)0733-9445(1998)124:6(642)
Continuum Model for Masonry: Parameter Estimation and Validation
resolves10.1016/j.conbuildmat.2012.07.014
An orthotropic damage model for the analysis of masonry structures
resolves10.1007/s11012-020-01133-1
Discontinuum analysis of the fracture mechanism in masonry prisms and wallettes via discrete element method
resolves10.1016/j.compstruc.2018.06.003
A detailed micro-modelling approach for the structural analysis of masonry assemblages
resolves10.1016/j.engstruct.2019.04.026
Numerical investigation of the role of masonry typology on shear strength
resolves10.1016/j.ijsolstr.2017.02.014
Micro-mechanical finite element modeling of diagonal compression test for historical stone masonry structure
resolves10.1016/j.istruc.2022.10.105
Investigation of in-plane and out-of-plane interaction in unreinforced masonry piers by block-based micro-modeling
resolves10.12989/eas.2016.11.4.563
Discrete element modeling of masonry structures: Validation and application
resolves10.1016/j.engstruct.2022.115466
Modeling of masonry structures using a new 3D cohesive interface material model considering dilatancy softening
resolves10.1016/j.engstruct.2022.115059
Effect of flanges on the in-plane behavior of the masonry walls
resolves10.1016/j.engstruct.2020.110337
Numerical analysis and parametric study of unreinforced masonry walls with arch openings under lateral in-plane loading
resolves10.1016/j.engfracmech.2018.11.046
A damaging block-based model for the analysis of the cyclic behaviour of full-scale masonry structures
resolves10.1016/S0013-7952(01)00071-0
Quantitative evaluation of stability changes in historical stone bridges in Kagoshima, Japan, by weathering
resolves10.1016/j.jrmge.2014.09.001
3D random Voronoi grain-based models for simulation of brittle rock damage and fabric-guided micro-fracturing
resolves10.1007/s10704-019-00373-x
Simulation of uniaxial tensile behavior of quasi-brittle materials using softening contact models in DEM
resolves10.1016/j.jrmge.2013.07.002
A discontinuum-based model to simulate compressive and tensile failure in sedimentary rock
resolves10.1007/s40571-015-0044-9
A local constitutive model for the discrete element method. Application to geomaterials and concrete
resolves10.1016/j.engstruct.2020.111626
Discontinuous approaches for nonlinear dynamic analyses of an ancient masonry tower
resolves10.3390/heritage4010025
Quasi-Static Nonlinear Seismic Assessment of a Fourth Century A.D. Roman Aqueduct in Istanbul, Turkey
resolves10.1016/0148-9062(88)92293-0
Formulation of a three-dimensional distinct element model—Part I. A scheme to detect and represent contacts in a system composed of many polyhedral blocks
resolves10.1016/0148-9062(88)92294-2
Formulation of a three-dimensional distinct element model—Part II. Mechanical calculations for motion and interaction of a system composed of many polyhedral blocks
resolves10.1007/s11012-017-0688-z
Effects of the dilatancy of joints and of the size of the building blocks on the mechanical behavior of masonry structures
resolves10.1007/s10518-020-00894-0
Effects of size and position of openings on in-plane capacity of unreinforced masonry walls
resolves10.1016/S0141-0296(02)00033-0
Modelling of historical masonry structures: comparison of different approaches through a case study
resolves10.1016/j.conbuildmat.2022.128534
Compressive and shear behavior of brick masonry assemblages strengthened with polyurea coating: Experiment and DEM investigations
resolves10.1016/j.engstruct.2022.115492
Analysis and prediction of masonry wallette strength under combined compression-bending via stochastic computational modeling
resolves10.1016/j.istruc.2020.08.026
Simulation of the in-plane structural behavior of unreinforced masonry walls and buildings using DEM
resolves10.3390/infrastructures7030031
Discrete Element Bonded-Block Models for Detailed Analysis of Masonry
resolves10.1016/j.engstruct.2014.08.021
Plasticity based approach for failure modelling of unreinforced masonry
resolves10.1016/j.engfracmech.2022.108645
An interfacial damage-plastic model for the simulation of masonry structures under monotonic and cyclic loadings
resolves10.1016/j.engstruct.2006.10.019
Modeling of unreinforced masonry walls under shear and compression
The 14 references without a DOI — listed, not checked
no DOI — not checked10.1007/s40571-023-00586-x_bib1
no DOI — not checkedVisual programming for structural assessment of out-of-plane mechanisms in historic masonry structures
no DOI — not checkedMultisurface interface model for analysis of masonry structures
no DOI — not checkedDiscrete element modeling of the seismic behavior of stone masonry arches
no DOI — not checkedA meso-scale discrete element method framework to simulate thermo-mechanical failure of concrete subjected to elevated temperatures
no DOI — not checkedDynamic relaxation applied to continuum and discontinuum numerical models in geomechanics
no DOI — not checkedItasca Consulting Group Inc. (2013) 3DEC three dimensional distinct element code
no DOI — not checkedBlock modelling of rock masses. Concepts and application to dam foundations
no DOI — not checkedComputational investigations on the combined shear–torsion–bending behavior of dry-joint masonry using DEM
no DOI — not checkedFailure analysis of masonry wall panels subjected to in-plane and out-of-plane loading using the discrete element method
no DOI — not checkedApplication of a discontinuity model with softening to the analysis of dam foundations using the Discrete Element Method
no DOI — not checkedShear tests on masonry walls
no DOI — not checkedRecommended properties for advanced numerical analysis
no DOI — not checkedCapabilities and limitations of existing finite element simplified micro-modeling techniques for unreinforced masonry
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-08-10 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1007/s40571-023-00586-x"><img src="https://citestamp.com/citestamped/10.1007/s40571-023-00586-x/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1007/s40571-023-00586-x)