Reference health

Study on the mechanism of the oxidation of soot on Fe2O3 catalyst

https://doi.org/10.1016/j.apcatb.2012.05.032
CiteStamped reference-health badge
24/24 checkable references clean · checked 2026-07-23

Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.

5 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.

The 24 checked references that resolve
resolves10.1016/0926-3373(96)00021-5
Worldwide diesel emission standards, current experiences and future needs
resolves10.1016/S0926-3373(01)00251-X
The influence of NO on soot oxidation rate: molten salt versus platinum
resolves10.1016/j.jcat.2004.11.029
Mean field modeling of NO oxidation over Pt/AlO catalyst under oxygen-rich conditions
resolves10.1016/j.apcatb.2004.01.004
The role of NO2 and O2 in the accelerated combustion of soot in diesel exhaust gases
resolves10.1016/S0926-3373(00)00182-X
Realistic contact for soot with an oxidation catalyst for laboratory studies
resolves10.1016/j.cattod.2006.02.008
Promotional effect of rare earths and transition metals in the combustion of diesel soot over CeO2 and CeO2–ZrO2
resolves10.1016/j.jcat.2004.11.027
Enhanced soot oxidation by lattice oxygen via La3+-doped CeO2
resolves10.1016/0926-3373(92)80037-Z
Effect of support material on the catalytic combustion of diesel soot particulates
resolves10.1016/S0926-3373(98)00046-0
Carbon oxidation with platinum supported catalysts
resolves10.1016/S0926-3373(03)00055-9
Improvement of Pt catalyst for soot oxidation using mixed oxide as a support
resolves10.1016/j.jcat.2008.01.004
Ceria-catalyzed soot oxidation studied by environmental transmission electron microscopy
resolves10.1006/jcat.1998.2201
Transition Metal Oxide Catalyzed Carbon Black Oxidation: A Study with18O2
resolves10.1016/j.apcatb.2007.11.024
Study of the reaction of NO and soot on Fe2O3 catalyst in excess of O2
resolves10.1016/j.apcatb.2008.06.014
Global kinetic modelling of the reaction of soot with O2 and NO on Fe2O3 catalyst
resolves10.1016/j.jcat.2010.08.017
Determination of active site densities and mechanisms for soot combustion with O2 on Fe-doped CeO2 mixed oxides
resolves10.1016/S0926-3373(02)00325-9
Simultaneous conversion of nitrogen oxides and soot into nitrogen and carbon dioxide over iron containing oxide catalysts in diesel exhaust gas
resolves10.1016/j.cep.2006.03.014
A novel laboratory bench for practical evaluation of catalysts useful for simultaneous conversion of NO and soot in diesel exhaust
resolves10.1016/j.jcat.2008.09.018
Kinetic modeling of the oxidation of CO on Fe2O3 catalyst in excess of O2
resolves10.1016/S0926-3373(96)00060-4
Catalysts for the oxidation of soot from diesel exhaust gases II. Contact between soot and catalyst under practical conditions
resolves10.1016/S0008-6223(97)00209-1
The formation of carbon surface oxygen complexes by oxygen and ozone. The effect of transition metal oxides
resolves10.1016/S0040-6031(96)03002-X
The effects of heat and mass transfer in thermogravimetrical analysis. A case study towards the catalytic oxidation of soot
resolves10.1080/01614947108075486
ISOTOPIC EXCHANGE OF OXYGEN<sup>18</sup>O BETWEEN THE GASEOUS PHASE AND OXIDE CATALYSTS
resolves10.1111/j.1151-2916.1983.tb10618.x
Oxygen Diffusion in MgO and α‐Fe <sub>2</sub> O <sub>3</sub>
resolves10.1021/jp067363r
Density Functional Study of the Chemisorption of O<sub>2</sub> Across Two Rings of the Armchair Surface of Graphite
The 5 references without a DOI — listed, not checked
no DOI — not checkedO. Salvat, P. Marez, G. Belot, SAE Technical Paper Series 2000-01-0473.
no DOI — not checkedD. Reichert, Untersuchungen zur Reaktion von Stickstoffoxiden und Sauerstoff am Katalysator α-Fe2O3, Ph.D. Thesis, University of Karlsruhe, 2008.
no DOI — not checkedS. Wagloehner, Soot oxidation on iron oxide catalysts, Ph.D. Thesis, Karlsruhe Institute of Technology, 2012.
no DOI — not checkedT. Klos, Eindimensionale-Multikomponenten-Raman-Streuung zur Messung charakteristischer Turbulenzeigenschaften, VDI-Reihe 8, Fortschr.-Ber. Nr. 692 (1998).
no DOI — not checked10.1016/j.apcatb.2012.05.032_bib0135
What this badge says. CiteStamped means the CHECKABLE references of this work were clean at the dated check: each resolved to a known work in a public registry, and none carried a retraction notice at that time. It says nothing about the quality, findings, or importance of the work itself, and nothing about references deposited without a DOI.

checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record

Embed this badge

Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.

<a href="https://citestamp.com/citestamped/10.1016/j.apcatb.2012.05.032"><img src="https://citestamp.com/citestamped/10.1016/j.apcatb.2012.05.032/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[![CiteStamped reference-health badge](https://citestamp.com/citestamped/10.1016/j.apcatb.2012.05.032/badge.svg)](https://citestamp.com/citestamped/10.1016/j.apcatb.2012.05.032)