Reference health

Low-cost DETA impregnation of acid-activated sepiolite for CO2 capture

https://doi.org/10.1016/j.cej.2018.07.086

54/54 checkable references clean · checked 2026-07-23

Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.

5 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.

The 54 checked references that resolve

resolves10.1021/ie200686q

Post-Combustion CO2 Capture Using Solid Sorbents: A Review

resolves10.1039/c004106h

An overview of CO2 capture technologies

resolves10.1126/science.1176731

Amine Scrubbing for CO 2 Capture

resolves10.1021/ie050569e

Pilot Plant Studies of the CO2 Capture Performance of Aqueous MEA and Mixed MEA/MDEA Solvents at the University of Regina CO2 Capture Technology Development Plant and the Boundary Dam CO2 Capture Demonstration Plant

resolves10.1002/jccs.200600034

Solubility of Carbon Dioxide in Aqueous Mixtures of DIPA + MDEA and DIPA + PZ Solutions

resolves10.1002/aic.16081

A study of film thickness and hydrodynamic entrance length in liquid laminar film flow along a vertical tube

resolves10.1021/ie0504194

Applications of Pore-Expanded Mesoporous Silica. 2. Development of a High-Capacity, Water-Tolerant Adsorbent for CO2

resolves10.1021/acs.iecr.5b00515

Development of a Semiautomated Zero Length Column Technique for Carbon Capture Applications: Study of Diffusion Behavior of CO2 in MOFs

resolves10.1021/acs.iecr.5b00513

Development of a Semiautomated Zero Length Column Technique for Carbon Capture Applications: Rapid Capacity Ranking of Novel Adsorbents

resolves10.1016/S0376-7388(01)00524-5

Analysis of CO2 removal by hollow fiber membrane contactors

resolves10.1002/ange.201409563

Membranes with Fast and Selective Gas‐Transport Channels of Laminar Graphene Oxide for Efficient CO2 Capture

resolves10.1007/s10953-015-0319-z

CO2 Capture in Wet and Dry Superbase Ionic Liquids

resolves10.1016/j.apenergy.2016.09.081

Wet impregnation of a commercial low cost silica using DETA for a fast post-combustion CO2 capture process

resolves10.1007/s10450-011-9364-0

Flowrate correction for the determination of isotherms and Darken thermodynamic factors from Zero Length Column (ZLC) experiments

resolves10.1016/j.cherd.2018.01.023

Testing the stability of novel adsorbents for carbon capture applications using the zero length column technique

resolves10.1021/ef020058u

Novel Polyethylenimine-Modified Mesoporous Molecular Sieve of MCM-41 Type as High-Capacity Adsorbent for CO2 Capture

resolves10.1002/chem.200701467

Efficient CO2 Capturer Derived from As‐Synthesized MCM‐41 Modified with Amine

resolves10.1016/j.cej.2015.03.098

Tetraethylenepentamine-modified MCM-41/silica gel with hierarchical mesoporous structure for CO2 capture

resolves10.1016/S2095-4956(15)60318-7

CO2 adsorption performance of different amine-based siliceous MCM-41 materials

resolves10.1021/la202972t

Polyethylenimine-Impregnated Mesoporous Silica: Effect of Amine Loading and Surface Alkyl Chains on CO2 Adsorption

resolves10.1021/ie4020588

Large-Pore Mesostructured Silica Impregnated with Blended Amines for CO2 Capture

resolves10.1016/j.micromeso.2014.10.045

CO2 capture with pore-expanded MCM-41 silica modified with amino groups by double functionalization

resolves10.1016/j.cej.2011.09.107

Monoamine-grafted MCM-48: An efficient material for CO2 removal at low partial pressures

resolves10.1016/j.micromeso.2007.10.049

Adsorptive removal of carbon dioxide using polyethyleneimine-loaded mesoporous silica materials

resolves10.1039/C1CP23366A

A solid molecular basket sorbent for CO 2 capture from gas streams with low CO 2 concentration under ambient conditions

resolves10.1016/j.cej.2014.10.039

APTES grafted ordered mesoporous silica KIT-6 for CO2 adsorption

resolves10.1016/j.ceramint.2012.02.050

Acid-, base-, and heat-induced degradation behavior of Chinese sepiolite

resolves10.1016/0021-9517(91)90097-N

Alkaline-substituted sepiolites as a new type of strong base catalyst

resolves10.1180/0009855033830101

Effect of acid treatment on the structure of sepiolite

resolves10.1021/la903743n

Microwave versus Conventional Heating in the Grafting of Alkyltrimethoxysilanes onto Silica Particles

resolves10.1016/j.clay.2016.02.013

Purification and defibering of a Chinese sepiolite

resolves10.1039/C0EE00213E

High efficiency nanocomposite sorbents for CO2 capture based on amine-functionalized mesoporous capsules

resolves10.1016/j.micromeso.2012.09.023

Molecular basket sorbents polyethylenimine–SBA-15 for CO2 capture from flue gas: Characterization and sorption properties

resolves10.1021/ef901077k

Adsorption of CO2 on Amine-Functionalized Y-Type Zeolites

resolves10.1021/ie400582a

Effects of O2 and SO2 on the Capture Capacity of a Primary-Amine Based Polymeric CO2 Sorbent

resolves10.1021/ie3030533

Carbon Dioxide Adsorption on Amine-Impregnated Mesoporous SBA-15 Sorbents: Experimental and Kinetics Study

resolves10.1039/c2ee22647b

CO2 capture from gas stream by zeolite 13X using a dual-column temperature/vacuum swing adsorption

resolves10.1016/j.cej.2010.01.041

Further investigations of CO2 capture using triamine-grafted pore-expanded mesoporous silica

resolves10.1039/c2ta01343f

Development of high efficiency adsorbents for CO2 capture based on a double-functionalization method of grafting and impregnation

resolves10.1007/s10973-007-8329-8

Study of raw and thermally treated sepiolite from the Mantoudi area, Euboea, Greece

resolves10.1180/000985599546406

Effect of heating and acid pre-treatment on pore size distribution of sepiolite

resolves10.1016/j.clay.2015.12.032

Mineralogical characterisation and surface properties of sepiolite from Polatli (Turkey)

resolves10.1016/j.jtice.2015.07.025

Synthesis and structural characterization of magnetite/sepiolite composite and its sorptive properties for Co(II) and Cd(II)

resolves10.1016/j.ijhydene.2014.04.112

Preparation and characterization of PEI-loaded MCM-41 for CO2 capture

resolves10.1016/j.micromeso.2015.10.006

Zeolite@Mesoporous silica-supported-amine hybrids for the capture of CO2 in the presence of water

resolves10.1016/j.cej.2015.11.077

Sepiolite nanofiber-supported platinum nanoparticle catalysts toward the catalytic oxidation of formaldehyde at ambient temperature: Efficient and stable performance and mechanism

resolves10.1016/j.jhazmat.2005.05.039

Adsorption of Acid Red 57 from aqueous solutions onto surfactant-modified sepiolite

resolves10.1016/j.desal.2011.01.080

Preparation and characteristics of anion exchanger from corn stalks

resolves10.1016/j.cej.2017.02.035

Amine-functionalized poly(ionic liquid) brushes for carbon dioxide adsorption

resolves10.1021/acs.energyfuels.6b03301

Performance of 1,8-Diazabicyclo[5.4.0]undec-7-ene-Modified SBA-15 for Selective Adsorption of CO2

resolves10.1016/S1001-0742(12)60011-4

Carbon dioxide capture using polyethylenimine-loaded mesoporous carbons

resolves10.1016/j.ijggc.2016.05.021

CO 2 adsorption study on primary, secondary and tertiary amine functionalized Si-MCM-41

resolves10.1002/adfm.200600427

CO2 Capture by As‐Prepared SBA‐15 with an Occluded Organic Template

resolves10.1016/j.jngse.2015.09.029

Using modified Avrami kinetic and two component isotherm equation for modeling of CO 2 /N 2 adsorption over a 13X zeolite bed

The 5 references without a DOI — listed, not checked

no DOI — not checkedA comparative kinetics study of CO2 absorption into aqueous DEEA/MEA and DMEA/MEA blended solutions

no DOI — not checkedCO2 capture by a task-specific ionic liquid

no DOI — not checkedAmine-impregnated silica monolith with a hierarchical pore structure: enhancement of CO2 capture capacity

no DOI — not checkedInfrared study of CO2 sorption over “molecular basket” sorbent consisting of polyethylenimine-modified mesoporous molecular sieve

no DOI — not checkedStruktur und entstehung des sepioliths

What this badge says. CiteStamped means the CHECKABLE references of this work were clean at the dated check: each resolved to a known work in a public registry, and none carried a retraction notice at that time. It says nothing about the quality, findings, or importance of the work itself, and nothing about references deposited without a DOI.

checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record

view as graph · paper page

Embed this badge

Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.

<a href="https://citestamp.com/citestamped/10.1016/j.cej.2018.07.086"><img src="https://citestamp.com/citestamped/10.1016/j.cej.2018.07.086/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>

[![CiteStamped reference-health badge](https://citestamp.com/citestamped/10.1016/j.cej.2018.07.086/badge.svg)](https://citestamp.com/citestamped/10.1016/j.cej.2018.07.086)