Reference health
Process optimization, microstructure characterization and thermal properties of mesophase pitch-based carbon fiber reinforced aluminum matrix composites fabricated by vacuum hot pressing
57/57 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
2 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 57 checked references that resolve
resolves10.1016/j.compositesb.2018.08.014
Thermal conductivity of copper-diamond composite materials produced by electrodeposition and the effect of TiC coatings on diamond particles
resolves10.1016/j.compositesb.2019.107495
Three-dimensional carbon fiber-graphene network for improved thermal conductive properties of polyamide-imide composites
resolves10.1016/j.compositesb.2019.107735
Effect of volume fraction and unidirectional orientation controlled graphite on thermal properties of graphite/copper composites
resolves10.1016/j.compositesb.2012.02.004
Processing of Al/SiC composites in continuous solid–liquid co-existent state by SPS and their thermal properties
resolves10.1016/j.compositesb.2018.11.004
Thermal and mechanical properties of copper-graphite and copper-reduced graphene oxide composites
resolves10.1016/j.compositesa.2015.03.013
Interfacial microstructure of graphite flake reinforced aluminum matrix composites fabricated via hot pressing
resolves10.1016/S1002-0071(12)60029-X
Review of metal matrix composites with high thermal conductivity for thermal management applications
resolves10.1007/s10853-013-7717-7
Thermal expansion coefficient and thermal fatigue of discontinuous carbon fiber-reinforced copper and aluminum matrix composites without interfacial chemical bond
resolves10.3390/ma12244030
Aluminum/Carbon Composites Materials Fabricated by the Powder Metallurgy Process
resolves10.1016/j.compositesb.2018.12.018
Interfacial reaction induced efficient load transfer in few-layer graphene reinforced Al matrix composites for high-performance conductor
resolves10.1016/j.compositesb.2018.07.035
Fabrication and characterization of synergistic Al-SiC-GNPs hybrid composites
resolves10.1016/j.msea.2020.139839
Effect of Al2O3 coating thickness on microstructural characterization and mechanical properties of continuous carbon fiber reinforced aluminum matrix composites
resolves10.1016/j.compositesb.2021.108622
Effect of TM (TM=Fe, Mn, Cr) alloying on the high temperature properties and strengthening mechanism of Cf/Al composites
resolves10.1016/j.compositesb.2019.02.055
A study on the microstructural changes and mechanical behaviors of carbon fibers induced by optimized electrochemical etching
resolves10.1016/j.compositesb.2020.108342
Microstructure-elastic property relationships in carbon fibers: A nanoindentation study
resolves10.1016/j.materresbull.2013.07.064
Fabrication and thermal conductivity of copper matrix composites reinforced with Mo2C or TiC coated graphite fibers
resolves10.1016/j.compositesa.2016.10.032
Carbon fiber reinforced metal matrix composites: Fabrication processes and properties
resolves10.1016/j.compositesb.2017.12.001
Fabrication of in situ carbon fiber/aluminum composites via friction stir processing: Evaluation of microstructural, mechanical and tribological behaviors
resolves10.3390/ma12193133
Micromechanical Modeling of Damage Evolution and Mechanical Behaviors of CF/Al Composites under Transverse and Longitudinal Tensile Loadings
resolves10.1016/j.jallcom.2019.152459
Micromechanics analysis on the microscopic damage mechanism and mechanical behavior of graphite fiber-reinforced aluminum composites under transverse tension loading
resolves10.1111/ffe.13366
Simulation and experimental study of mechanical and fracture behavior of 2.5D woven C‐fiber/aluminum composites under warp directional tension loading
resolves10.1016/S1003-6326(09)60433-7
Interface and thermal expansion of carbon fiber reinforced aluminum matrix composites
resolves10.1016/j.compscitech.2014.03.022
Effect of aluminum carbide on thermal conductivity of the unidirectional CF/Al composites fabricated by low pressure infiltration process
resolves10.1179/1432891715Z.0000000001951
Influence of Si addition on thermal conductivity of unidirectional CF/Al-Si composites fabricated by low pressure infiltration process
resolves10.1016/j.jallcom.2018.04.330
Effect of interfacial microstructure on the thermal-mechanical properties of mesophase pitch-based carbon fiber reinforced aluminum composites
resolves10.1016/j.jmst.2019.04.034
Self-lubricating bidirectional carbon fiber reinforced smart aluminum composites by squeeze infiltration process
resolves10.1016/j.diamond.2012.10.008
Diamond/aluminum composites processed by vacuum hot pressing: Microstructure characteristics and thermal properties
resolves10.1016/j.compositesb.2016.09.051
Fabrication of graphite film/aluminum composites by vacuum hot pressing: Process optimization and thermal conductivity
resolves10.1016/j.compositesb.2012.01.083
Thermal properties of aluminum–graphite composites by powder metallurgy
resolves10.1002/adem.201400148
Preparation and Thermal Conductivity of Spark Plasma Sintered Aluminum Matrix Composites Reinforced with Titanium‐Coated Graphite Fibers
resolves10.1016/j.msea.2007.10.081
Interface structure in carbon and graphite fiber reinforced 2014 aluminum alloy processed with active fiber cooling
resolves10.1016/j.matdes.2015.10.146
Graphite film/aluminum laminate composites with ultrahigh thermal conductivity for thermal management applications
resolves10.1016/j.diamond.2003.11.095
Microstructure and interfacial characteristics of aluminium–diamond composite materials
resolves10.1016/j.compositesb.2019.107137
A new micromechanical method for the analysis of thermal conductivities of unidirectional fiber/CNT-reinforced polymer hybrid nanocomposites
resolves10.1007/s10853-014-8272-6
Effect of chromium carbide coating on thermal properties of short graphite fiber/Al composites
resolves10.1016/S1359-835X(02)00003-9
Thermal conductivity of unidirectional copper matrix carbon fibre composites
resolves10.1016/j.matdes.2011.03.035
Graphite fiber/copper composites with near-zero thermal expansion
resolves10.1023/A:1026749831726
Fabrication process and thermal properties of SiCp/Al metal matrix composites for electronic packaging applications
resolves10.1016/j.ijrmhm.2013.02.007
Fabrication of diamond particles reinforced Al-matrix composites by hot-press sintering
resolves10.1016/j.matdes.2016.01.085
Microstructure and thermal properties of Al/W-coated diamond composites prepared by powder metallurgy
resolves10.1016/S0167-577X(02)01006-6
Property characteristics of a AlNp/Al composite fabricated by squeeze casting technology
resolves10.1557/JMR.2009.0034
Thermal properties of nanocrystalline Al composites reinforced by AlN nanoparticles
resolves10.1021/acsami.8b12691
Carbon Nanotubes Grown on Graphite Films as Effective Interface Enhancement for an Aluminum Matrix Laminated Composite in Thermal Management Applications
resolves10.1007/s12540-019-00324-0
Synergetic Effect of Discontinuous Carbon Fibers and Graphite Flakes on Thermo-Mechanical Properties of Aluminum Matrix Composites Fabricated by Solid–Liquid Phase Sintering
resolves10.1007/s11837-998-0128-6
Advances in composite materials for thermal management in electronic packaging
resolves10.1007/BF01154948
Mechanical strength of ultra-fine Al-AlN composites produced by a combined method of plasma-alloy reaction, spray deposition and hot pressing
resolves10.1016/j.msea.2008.12.045
AlN nanoparticle-reinforced nanocrystalline Al matrix composites: Fabrication and mechanical properties
resolves10.1007/s11665-012-0460-4
Fabrication of Short Graphite Fiber Preforms for Liquid Metal Infiltration
resolves10.1177/0021998313495750
Fabrication and thermal conductivity of short graphite fiber/Al composites by vacuum pressure infiltration
resolves10.2320/matertrans.M2016426
Fabrication of Carbon Fiber Oriented Al–Based Composites by Hot Extrusion and Evaluation of Their Thermal Conductivity
resolves10.2320/matertrans.M2017075
Manufacturing Process of Carbon-Alumina Short Fiber Hybrid Reinforced Aluminum Matrix Composites by Low Pressure Casting
resolves10.2320/matertrans.MAW201808
Microstructures of Carbon Fiber and Hybrid Carbon Fiber-Carbon Nanofiber Reinforced Aluminum Matrix Composites by Low Pressure Infiltration Process and Their Properties
resolves10.1016/j.matdes.2018.06.059
Processing, structure and thermal conductivity correlation in carbon fibre reinforced aluminium metal matrix composites
resolves10.1007/s40195-014-0106-7
Simple Fabrication and Characterization of Discontinuous Carbon Fiber Reinforced Aluminum Matrix Composite for Lightweight Heat Sink Applications
The 2 references without a DOI — listed, not checked
no DOI — not checkedPreparation and thermophysical properties of Cu alloy-high thermal conductivity carbon fibre composites
no DOI — not checkedSiCp-Al composites fabricated by modified squeeze casting technique
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1016/j.compositesb.2021.108746"><img src="https://citestamp.com/citestamped/10.1016/j.compositesb.2021.108746/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1016/j.compositesb.2021.108746)