Every reference with a DOI in the deposited reference list resolved to a known
work in Crossref or DataCite at the dated check, and none carried a retraction,
withdrawal, or removal notice.
The 20 references without a DOI — listed, not checked
no DOI — not checkedEffect of filler nature and content on the behavior of bituminous mastics
no DOI — not checkedInfluence of diatomite and mineral powder on thermal oxidative ageing properties of asphalt
no DOI — not checkedEssential and plastic works of ductile fracture in asphalt binders
no DOI — not checkedN. Gibson, X. Qi, A. Shenoy, G. Al-Khateeb, M.E. Kutay, A. Andriescu, Full-scale accelerated performance testing for superpave and structural validation, Final Rep. FHWA-RT-01946, Federal Highway Administration, Washington, DC, 2011.
no DOI — not checkedM. O. Marasteanu, R. Velasquez, A. Zofka, A. Cannone Falchetto, Development of a simple test to determine the low temperature creep compliance of asphalt mixtures, Transportation Research Board (TRB), Washington, DC, NCHRP IDEA Rep. 133, 2009.
no DOI — not checkedThe bending beam rheometer; a simple device for measuring low-temperature rheology of asphalt binders (with discussion)
no DOI — not checkedEffect of hydrated lime on long-term oxidative aging characteristics of asphalt
no DOI — not checkedMoRTH, 5th Revision, Specifications for road and bridgeworks, Ministry of Road Transport and Highways Indian Roads Congress, New Delhi, India, 2013.
no DOI — not checkedASTM: D 1754, Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test), American Society for Testing and Material, 2014, pp. 1–6.
no DOI — not checkedASTM: D 6521, Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV), American Society for Testing and Material, 2013, pp. 1–6.
no DOI — not checkedASTM: D 7175, Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR), American Society for Testing and Material, 2005, pp. 1–16.
no DOI — not checkedZero shear viscosity of bitumen-filler mastics of warm-mix binders
no DOI — not checkedInvestigation on influence of nanoclay addition on rheological performance of asphalt binder
no DOI — not checkedAASHTO: TP 113, Standard method of test for Determination for Asphalt Binder Resistance to Ductile Failure Using Double Edge Notched Tension (DENT) Test, AASHTO International, 2015, pp. 1–9.
no DOI — not checkedValidation of the essential work of fracture approach to fatigue grading of asphalt binders
no DOI — not checkedDouble-edge-notched tension testing of asphalt cement for the control of cracking in flexible asphalt pavements
no DOI — not checkedH.K. Agbovi, Effects of low temperatures, repetitive stresses and chemical aging on thermal and fatigue cracking in asphalt cement pavements on highway 417 (MSc thesis), Department of Chemistry, Queen’s University, Kingston, Canada, 201).
no DOI — not checkedO.P. Togunde, Low temperature investigations on asphalt binder performance – a case study on highway 417 trial sections (MSc thesis), Department of Chemistry, Queen’s University, Kingston, Canada, 2008.
no DOI — not checkedD. Sowah-Kuma, Assessment of low temperature cracking in asphalt pavement mixes and rheological performance of asphalt binders (MSc thesis), Department of Chemistry, Queen’s University, Kingston, Canada, 2015.
no DOI — not checkedRole of bending beam rheometer parameters in thermal stress calculations
checked 2026-07-23 — re-checked daily as this page is visited;
titles and statuses come from Crossref and DataCite and are not part of the signed record
Both snippets point at the live badge image and link back to this page. The
badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.