Reference health
Effect of the grain size of YSZ ceramic materials on corrosion resistance in a hot molten salt CaCl2-CaF2-CaO system
33/33 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
2 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 33 checked references that resolve
resolves10.1016/j.jpcs.2004.06.041
Calciothermic reduction of TiO2 and in situ electrolysis of CaO in the molten CaCl2
resolves10.1016/B978-0-08-096988-6.00019-5
Rare Earth, Titanium Group Metals, and Reactive Metals Production
resolves10.1111/jace.15377
High‐temperature stability of
<scp>YSZ</scp>
and
<scp>MSZ</scp>
ceramic materials in CaF
<sub>2</sub>
–MgF
<sub>2</sub>
–MgO molten salt system
resolves10.1016/j.jeurceramsoc.2005.03.104
A comparative study on ionic conductivity of Sr and Mg stabilized zirconia by impedance spectroscopy
resolves10.1016/j.ceramint.2012.01.035
Magnesia stabilized zirconia doped with boron, ceria and gadolinia
resolves10.2298/JMMB120112036G
Study on electrolytic reduction with controlled oxygen flow for iron from molten oxide slag containing FeO
resolves10.1016/j.jallcom.2018.09.001
High-temperature stability of CSZ, YSZ, and MSZ ceramic materials in CaCl2-CaF2-CaO molten salt system
resolves10.1016/j.electacta.2010.04.032
A direct electrochemical route from oxides to Ti–Si intermetallics
resolves10.1016/j.electacta.2011.07.026
Direct selective extraction of titanium silicide Ti5Si3 from multi-component Ti-bearing compounds in molten salt by an electrochemical process
resolves10.1016/j.jallcom.2017.08.213
Direct production of TiAl3 from Ti/Al-containing oxides precursors by solid oxide membrane (SOM) process
resolves10.1007/s11663-005-0037-9
Solid oxide membrane process for magnesium production directly from magnesium oxide
resolves10.1007/s11663-012-9633-7
Green Electrochemical Process Solid-Oxide Oxygen-Ion-Conducting Membrane (SOM): Direct Extraction of Ti-Fe Alloys from Natural Ilmenite
resolves10.1016/j.electacta.2010.01.008
Direct electrochemical preparation of CeNi5 and La Ce1−Ni5 alloys from mixed oxides by SOM process
resolves10.1016/j.ijhydene.2010.04.098
Preparation of Ti–Fe based hydrogen storage alloy by SOM method
resolves10.1038/35030069
Direct electrochemical reduction of titanium dioxide to titanium in molten calcium chloride
resolves10.1007/s11837-001-0053-4
Emerging SOM technology for the green synthesis of metals from oxides
resolves10.1179/174328508X290911
Solid oxide membrane technology for environmentally sound production of titanium
resolves10.1039/c3ta15039a
Electrochemical extraction of Ti5Si3 silicide from multicomponent Ti/Si-containing metal oxide compounds in molten salt
resolves10.1007/s11837-008-0017-z
A lower carbon footprint process for production of metals from their oxide sources
resolves10.1007/s11837-003-0177-9
The electrochemical deoxidation of metal oxides by calcium using a solid oxide membrane
resolves10.1016/j.pnsc.2015.11.004
Design of optimum solid oxide membrane electrolysis cells for metals production
resolves10.1016/j.jeurceramsoc.2014.04.028
Stability of yttria stabilized zirconia in molten oxy-fluorite flux for the production of silicon with the solid oxide membrane process
resolves10.2298/JMMB120809005M
Yttria stabilized zirconia membrane stability in molten fluoride fluxes for low-carbon magnesium production by the SOM process
resolves10.1007/BF00274456
Searching for the stabilized zirconia exhibiting the best corrosion resistance in fluoride melts
resolves10.1007/s10800-009-0025-x
Yttria-stabilized zirconia as membrane material for electrolytic deoxidation of CaO–CaCl2 melts
resolves10.1111/jace.12449
Determining Yttria‐Stabilized Zirconia (
<scp>YSZ</scp>
) Stability in Molten Oxy‐Fluoride Flux for the Production of Magnesium with the
<scp>SOM</scp>
Process
resolves10.1111/j.1151-2916.1986.tb04741.x
Lattice Parameters and Density for Y
<sub>2</sub>
O
<sub>3</sub>
‐Stabilized ZrO
<sub>2</sub>
resolves10.1016/j.surfcoat.2010.04.044
Hot corrosion behavior of rare earth zirconates and yttria partially stabilized zirconia thermal barrier coatings
resolves10.1016/j.ceramint.2012.05.047
Evaluation of hot corrosion behavior of plasma sprayed ceria and yttria stabilized zirconia thermal barrier coatings in the presence of Na2SO4+V2O5 molten salt
resolves10.1016/S0167-2738(98)00163-5
Lattice and grain boundary diffusion of Ca in polycrystalline yttria-stabilized ZrO2 determined by employing SIMS technique
The 2 references without a DOI — listed, not checked
no DOI — not checkedAdvances in titanium production
no DOI — not checked10.1016/j.corsci.2020.108664_bib0160
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1016/j.corsci.2020.108664"><img src="https://citestamp.com/citestamped/10.1016/j.corsci.2020.108664/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1016/j.corsci.2020.108664)