Reference health
Fabrication and characterization of SiC whiskers toughened Al2O3 paste for stereolithography 3D printing applications
25/25 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
11 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 25 checked references that resolve
resolves10.1016/j.triboint.2019.105900
Effect of the progressive tool wear on surface topography and chip formation in micro-milling of Ti–6Al–4V using Ti(C7N3)-based cermet micro-mill
resolves10.1016/j.ceramint.2017.05.049
Fabrication and mechanical properties of Al2O3-SiCw-TiCnp ceramic tool material
resolves10.1016/j.jeurceramsoc.2018.05.031
High-porosity mullite ceramic foams prepared by selective laser sintering using fly ash hollow spheres as raw materials
resolves10.1111/j.1151-2916.2000.tb01446.x
Powder Processing, Rheology, and Mechanical Properties of Feedstock for Fused Deposition of Si
<sub>3</sub>
N
<sub>4</sub>
Ceramics
resolves10.1039/C8TB00677F
3D printing of ceramic-based scaffolds for bone tissue engineering: an overview
resolves10.1002/adfm.201703704
Perovskite and Organic Solar Cells Fabricated by Inkjet Printing: Progress and Prospects
resolves10.1016/j.jmbbm.2019.06.031
A study on biosafety of HAP ceramic prepared by SLA-3D printing technology directly
resolves10.1108/13552540610670690
Application of fused deposition in controlled microstructure metal‐ceramic composites
resolves10.1016/j.jmatprotec.2013.03.014
Additive manufacturing of alumina parts by indirect selective laser sintering and post processing
resolves10.1016/j.powtec.2018.07.023
Preparation and characterization of UV curable Al2O3 suspensions applying for stereolithography 3D printing ceramic microcomponent
resolves10.1016/j.ceramint.2019.05.328
Effect of printing strategies on forming accuracy and mechanical properties of ZrO2 parts fabricated by SLA technology
resolves10.1016/j.carbon.2013.12.089
Grain growth analysis of multiwalled carbon nanotube-reinforced bulk Ni composites
resolves10.1016/j.mssp.2013.01.005
Effect of PEG-400 on the morphology and electrical properties of ZnO nanoparticles application for gas sensor
resolves10.1016/j.cherd.2016.01.036
Particle migration using local variation of the viscosity (LVOV) model in flow of a non-Newtonian fluid for ceramic tape casting
resolves10.1038/1731089a0
The Einstein Relation between Relative Viscosity and Volume Concentration of Suspensions of Spheres
resolves10.1016/j.jeurceramsoc.2014.12.006
Light scattering in absorbing ceramic suspensions: Effect on the width and depth of photopolymerized features
resolves10.1016/j.compositesb.2015.08.022
Adhesive bonding of carbon fiber reinforced composite using UV-curing epoxy resin
resolves10.1016/j.compositesb.2019.01.030
Influence of high temperature on strength, ultrasonic velocity and mass loss of calcium carbonate whisker reinforced cement paste
The 11 references without a DOI — listed, not checked
no DOI — not checked3D printing of nano-scale Al2O3-ZrO2 eutectic ceramic: principle analysis and process optimization of pores
no DOI — not checkedDirect fabrication of compositionally graded Ti-Al2O3 multi-material structures using Laser Engineered Net Shaping
no DOI — not checkedSynthesis of Fe-doped alumina transparent ceramics by co-precipitation and vacuum sintering
no DOI — not checkedHigh temperature mechanical properties of Al2O3 -based ceramic tool material toughened by SiC whiskers and nanoparticles
no DOI — not checkedThe preparation of ZrO2-Al2O3 composite ceramic by SLA-3D printing and sintering processing
no DOI — not checkedDesk-top manufacturing: LOM vs pressing
no DOI — not checkedStructure ceramic components by 3D printing
no DOI — not checkedDirect ink writing of silicon carbide for microwave optics
no DOI — not checkedPreparation and mechanical properties of in situ growth TiC whiskers toughening Al2O3 ceramic matrix composite
no DOI — not checkedWetting behavior of low-index cubic SiC surfaces
no DOI — not checkedEffect of light intensity and exposure duration on cure of resin composite
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1016/j.jallcom.2020.154347"><img src="https://citestamp.com/citestamped/10.1016/j.jallcom.2020.154347/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1016/j.jallcom.2020.154347)