Reference health
Effect of Si addition on the mechanical and thermal properties of sintered reaction bonded silicon nitride
29/29 checkable references clean · checked 2026-07-22
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
2 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 29 checked references that resolve
resolves10.1016/S0925-9635(02)00305-9
Adhesion behaviour assessment on diamond coated silicon nitride by acoustic emission
resolves10.4191/kcers.2013.50.3.218
Densification of Reaction Bonded Silicon Nitride with the Addition of Fine Si Powder - Effects on the Sinterability and Mechanical Properties
resolves10.1016/S0272-8842(01)00006-2
Processing, microstructure, mechanical properties of Si3N4 obtained by slip casting and pressureless sintering
resolves10.1111/j.1151-2916.1997.tb02972.x
Pressureless Sintering of Si
<sub>3</sub>
N
<sub>4</sub>
Ceramic Using AlN and Rare‐Earth Oxides
resolves10.1016/j.jeurceramsoc.2004.08.025
Microstructure and mechanical properties of silicon nitride ceramics prepared by pressureless sintering with MgO–Al2O3–SiO2 as sintering additive
resolves10.1016/S0272-8842(03)00034-8
Effect of β-Si3N4 seed particles on the property of sintered reaction-bonded silicon nitride
resolves10.1023/B:JMSC.0000040090.33370.66
Post-densification behavior of reaction-bonded silicon nitride (RBSN): Effect of various characteristics of RBSN
resolves10.4028/www.scientific.net/KEM.352.185
Effect of Diluents on Post-Reaction Sintering of Silicon Nitride Ceramics
resolves10.1016/j.jeurceramsoc.2013.11.040
Sintered reaction-bonded silicon nitrides with high thermal conductivity: The effect of the starting Si powder and Si3N4 diluents
resolves10.1007/BF00727850
The effects of additions of ?-Si3N4 grog on the ?/? ratio of slip cast reaction bonded silicon nitride
resolves10.4191/kcers.2012.49.4.363
The Effect of Si<sub>3</sub>N<sub>4</sub>Addition on Nitriding and Post-Sintering Behavior of Silicon Powder Mixtures
resolves10.1016/j.ceramint.2014.06.019
The influence of α- and β-Si3N4 seeds on the properties of reaction bonded silicon nitride foams produced via wet processing
resolves10.1111/j.1151-2916.1994.tb07062.x
Microstructure Control of Silicon Nitride by Seeding with Rodlike β‐Silicon Nitride Particles
resolves10.1557/JMR.1999.0026
Effect of β–Si<sub>3</sub>N<sub>4</sub> seed crystal on the microstructure and mechanical properties of sintered reaction-bonded silicon nitride
resolves10.2109/jcersj2.116.688
Influence of zirconia addition on reaction bonded silicon nitride produced from various silicon particle sizes
resolves10.2109/jcersj2.117.157
Nitridation behaviour of ZrO2 added silicon powder with different ZrO2 particle sizes
resolves10.1111/j.1551-2916.2009.03435.x
Observations on the Influence of Secondary Me Oxide Additives (Me=Si, Al, Mg) on the Microstructural Evolution and Mechanical Behavior of Silicon Nitride Ceramics Containing RE
<sub>2</sub>
O
<sub>3</sub>
(RE=La, Gd, Lu)
resolves10.1111/j.1551-2916.2008.02448.x
Effects of Rare‐Earth (RE) Intergranular Adsorption on the Phase Transformation, Microstructure Evolution, and Mechanical Properties in Silicon Nitride with RE
<sub>2</sub>
O
<sub>3</sub>
+MgO Additives: RE=La, Gd, and Lu
resolves10.1016/j.ceramint.2013.11.098
Rapid fabrication of porous Si3N4/SiC ceramics via nitridation of silicon powder with ZrO2 as catalyst
resolves10.1016/j.matdes.2009.09.053
Microwave sintering of Si3N4 with LiYO2 and ZrO2 as sintering additives
resolves10.1016/j.ceramint.2009.02.013
Processing of micro-components made of sintered reaction-bonded silicon nitride (SRBSN). Part 1: Factors influencing the reaction-bonding process
resolves10.1007/s11665-014-1139-9
Effects of ZrO2 on the Nitridation Behavior and Mechanical Properties of Reaction-Bonded Si3N4/h-BN Composite
resolves10.1111/j.1744-7402.2011.02618.x
Effects of Impurity Oxygen Content in Raw Si Powder on Thermal and Mechanical Properties of Sintered Reaction‐Bonded Silicon Nitrides
The 2 references without a DOI — listed, not checked
no DOI — not checkedA comprehensive overview on today's ceramic substrate technologies
no DOI — not checkedSRBSN material development for automotive applications
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-22 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1016/j.jeurceramsoc.2017.06.029"><img src="https://citestamp.com/citestamped/10.1016/j.jeurceramsoc.2017.06.029/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1016/j.jeurceramsoc.2017.06.029)