Reference health
Effect of in-situ formed Y2O3 by metal hydride reduction reaction on thermal conductivity of β-Si3N4 ceramics
47/47 checkable references clean · checked 2026-07-22
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
5 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 47 checked references that resolve
resolves10.1007/s10854-017-6541-2
Crack generation in electroless nickel plating layers on copper-metallized silicon nitride substrates during thermal cycling
resolves10.1007/BF01161167
Relationships between processing, microstructure and properties of dense and reaction-bonded silicon nitride
resolves10.1038/417266a
Formation of tough interlocking microstructures in silicon nitride ceramics by dynamic ripening
resolves10.1016/j.scriptamat.2016.08.012
New route to improve the fracture toughness and flexural strength of Si3N4 ceramics by adding FeSi2
resolves10.1111/j.1151-2916.2001.tb00662.x
Thermal Conductivity of β‐Si
<sub>3</sub>
N
<sub>4</sub>
: III, Effect of Rare‐Earth (RE = La, Nd, Gd, Y, Yb, and Sc) Oxide Additives
resolves10.1088/1468-6996/11/6/065001
Potential use of only Yb<sub>2</sub>O<sub>3</sub>in producing dense Si<sub>3</sub>N<sub>4</sub>ceramics with high thermal conductivity by gas pressure sintering
resolves10.1557/JMR.2004.0416
Influence of additive composition on thermal and mechanical properties of β–Si<sub>3</sub>N<sub>4</sub> ceramics
resolves10.1111/jace.16902
ZrSi
<sub>2</sub>
–MgO as novel additives for high thermal conductivity of β‐Si
<sub>3</sub>
N
<sub>4</sub>
ceramics
resolves10.1111/jace.15544
Enhanced thermal conductivity in Si
<sub>3</sub>
N
<sub>4</sub>
ceramic with the addition of Y
<sub>2</sub>
Si
<sub>4</sub>
N
<sub>6</sub>
C
resolves10.2109/jcersj2.116.706
Effect of MgSiN2 addition on gas pressure sintering and thermal conductivity of silicon nitride with Y2O3
resolves10.4028/www.scientific.net/KEM.434-435.783
Fabrication of High Thermal Conductivity β-Si<sub>3</sub>N<sub>4</sub> Ceramics at Relatively Low Temperature Using MgSiN<sub>2</sub> as Additives
resolves10.1111/j.1151-2916.2001.tb01141.x
MgSiN
<sub>2</sub>
Addition as a Means of Increasing the Thermal Conductivity of β‐Silicon Nitride
resolves10.1016/j.actamat.2007.06.014
Processing and properties of sintered reaction-bonded silicon nitride with Y2O3–MgSiN2: Effects of Si powder and Li2O addition
resolves10.1111/j.1551-2916.2006.01462.x
Processing and Thermal Conductivity of Sintered Reaction‐Bonded Silicon Nitride: (II) Effects of Magnesium Compound and Yttria Additives
resolves10.1016/j.ceramint.2016.08.051
Comparative study of oxide and non-oxide additives in high thermal conductive and high strength Si3N4 ceramics
resolves10.2109/jcersj2.16055
Microstructural evolution of Si<sub>3</sub>N<sub>4</sub> ceramics from starting powders with different &alpha;-to-&beta; ratios
resolves10.1016/j.ceramint.2016.07.024
Mechanical properties and thermal conductivity of Si3N4 ceramics with YF3 and MgO as sintering additives
resolves10.1016/j.ceramint.2018.06.237
Comparative study of fluoride and non-fluoride additives in high thermal conductive silicon nitride ceramics fabricated by spark plasma sintering and post-sintering heat treatment
resolves10.1016/j.jeurceramsoc.2017.10.034
High-pressure spark plasma sintering of silicon nitride with LiF additive
resolves10.2109/jcersj.107.930
Control of .BETA.-Si3N4 Crystal Morphology and Its Mechanism. (Part 1). Effect of SiO2 and Y2O3 Ratio.
resolves10.1111/j.1151-2916.2000.tb01501.x
Thermal Conductivity of β‐Si
<sub>3</sub>
N
<sub>4</sub>
: II, Effect of Lattice Oxygen
resolves10.1016/j.scriptamat.2012.06.009
Simultaneous gettering of oxygen and chlorine and homogenization of the β phase by rare earth hydride additions to a powder metallurgy Ti–2.25Mo–1.5Fe alloy
resolves10.1007/s11661-014-2631-4
In Situ Synchrotron Radiation Study of TiH2-6Al-4V and Ti-6Al-4V: Accelerated Alloying and Phase Transformation, and Formation of an Oxygen-Enriched Ti4Fe2O Phase in TiH2-6Al-4V
resolves10.1179/003258909X12450768327063
Comparison of sintering of titanium and titanium hydride powders
resolves10.1111/j.1151-2916.2002.tb00073.x
Novel Two‐Step Sintering Process to Obtain a Bimodal Microstructure in Silicon Nitride
resolves10.1016/j.jeurceramsoc.2018.10.006
Enhanced thermal conductivity in Si3N4 ceramic by addition of a small amount of carbon
resolves10.1002/adma.200500715
Silicate Glasses with Unprecedented High Nitrogen and Electropositive Metal Contents Obtained by Using Metals as Precursors
resolves10.1111/j.1151-2916.1981.tb09885.x
Stability of Si
<sub>3</sub>
N
<sub>4</sub>
and Liquid Phase(s) During Sintering
resolves10.1557/JMR.1999.0064
Phase equilibria and crystal chemistry in the Y<sub>2</sub>O<sub>3</sub>–Al<sub>2</sub>O<sub>3</sub>–SiO<sub>2</sub> system
resolves10.1111/j.1151-2916.1980.tb10644.x
The System Si
<sub>3</sub>
N
<sub>4</sub>
‐SiO
<sub>2</sub>
‐Y
<sub>2</sub>
O
<sub>3</sub>
resolves10.1016/0022-3093(96)00147-0
Yttrium SiAlON glasses: structure and mechanical properties — elasticity and viscosity
resolves10.1016/S1359-6454(98)00290-0
Modeling and simulation of grain growth in Si3N4—I. Anisotropic Ostwald ripening
resolves10.1016/S1359-6454(98)00291-2
Modeling and simulation of grain growth in Si3N4—II. The α–β transformation
resolves10.1016/j.jascer.2015.03.003
Development of high-thermal-conductivity silicon nitride ceramics
resolves10.1016/j.jeurceramsoc.2017.05.045
Improved thermal conductivity of sintered reaction-bonded silicon nitride using a BN/graphite powder bed
resolves10.1016/j.jeurceramsoc.2019.10.003
Cost effective preparation of Si3N4 ceramics with improved thermal conductivity and mechanical properties
resolves10.1016/j.ceramint.2017.12.033
Low temperature pressureless sintering of silicon nitride ceramics for circuit substrates in powder electronic devices
resolves10.1111/ijac.13220
High thermal conductivity silicon nitride ceramics prepared by pressureless sintering with ternary sintering additives
The 5 references without a DOI — listed, not checked
no DOI — not checkedPresent status and future prospect of widegap semiconductor high-power devices
no DOI — not checkedOpportunities for enhancing the thermal conductivities of SiC and Si3N4 ceramics through improved processing
no DOI — not checkedSilicon nitride ceramics with high thermal conductivity and excellent mechanical properties fabricated with MgF2 sintering aid and post-sintering heat treatment
no DOI — not checkedRare earth element: is it a necessity for PM Ti alloys?, key engineering materials
no DOI — not checkedStudy on the thermal conductivity of Si3N4 sintered with Y2O3-MgO additive system
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-22 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1016/j.jeurceramsoc.2020.06.005"><img src="https://citestamp.com/citestamped/10.1016/j.jeurceramsoc.2020.06.005/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1016/j.jeurceramsoc.2020.06.005)