Reference health

Optimization preparation of composite membranes as proton exchange membrane for gaseous acetone fed microbial fuel cells

https://doi.org/10.1016/j.jpowsour.2021.230368
CiteStamped reference-health badge
54/54 checkable references clean · checked 2026-07-23

Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.

4 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.

The 54 checked references that resolve
resolves10.1016/j.jpowsour.2017.03.132
Long-term performance of a 20-L continuous flow microbial fuel cell for treatment of brewery wastewater
resolves10.1016/j.scitotenv.2018.09.098
Long-term effect of biochar amendment on the biodegradation of petroleum hydrocarbons in soil microbial fuel cells
resolves10.1016/j.biortech.2018.01.046
Copper removal and microbial community analysis in single-chamber microbial fuel cell
resolves10.1016/j.jenvman.2019.01.075
Bioremediation of wastewater through a quorum sensing triggered MFC: A sustainable measure for waste to energy concept
resolves10.1016/j.biotechadv.2019.107456
Combination of bioelectrochemical systems and electrochemical capacitors: Principles, analysis and opportunities
resolves10.1016/j.jpowsour.2017.03.109
Microbial fuel cells: From fundamentals to applications. A review
resolves10.1016/j.jclepro.2020.121446
A critical review on recent proton exchange membranes applied in microbial fuel cells for renewable energy recovery
resolves10.1016/j.biortech.2019.02.001
Biofouling of membranes in microbial electrochemical technologies: Causes, characterization methods and mitigation strategies
resolves10.1016/j.electacta.2004.08.015
Stabilized heteropolyacid/Nafion® composite membranes for elevated temperature/low relative humidity PEFC operation
resolves10.1016/j.biortech.2010.03.090
Recent advances in the separators for microbial fuel cells
resolves10.1016/j.biortech.2016.03.135
A review into the use of ceramics in microbial fuel cells
resolves10.1016/j.watres.2016.12.012
Integrating microbial fuel cells with anaerobic acidification and forward osmosis membrane for enhancing bio-electricity and water recovery from low-strength wastewater
resolves10.1016/j.desal.2013.06.013
Simultaneous wastewater treatment and electricity generation by microbial fuel cell: Performance comparison and cost investigation of using Nafion 117 and SPEEK as separators
resolves10.1016/j.memsci.2016.12.065
Synthesis of PVDF-g-PSSA proton exchange membrane by ozone-induced graft copolymerization and its application in microbial fuel cells
resolves10.1016/j.matchemphys.2016.07.008
A novel low cost polyvinyl alcohol-Nafion-borosilicate membrane separator for microbial fuel cell
resolves10.1016/j.cej.2020.125558
Investigation of a cation exchange membrane comprising Sulphonated Poly Ether Ether Ketone and Sulphonated Titanium Nanotubes in Microbial Fuel Cell and preliminary insights on microbial adhesion
resolves10.1016/j.bej.2017.10.003
Enhancement of bioelectricity generation for an air-cathode microbial fuel cell using polyvinyl alcohol-membrane electrode assemblies
resolves10.1016/j.ijhydene.2020.11.213
Crosslinked poly(vinyl alcohol) membrane as separator for domestic wastewater fed dual chambered microbial fuel cells
resolves10.1016/j.molstruc.2021.130173
Novel PVA/Methoxytrimethylsilane elastic composite membranes: preparation, characterization and DFT computation
resolves10.1016/j.ssi.2018.02.019
Preparation of sulfonated zeolite ZSM-5/sulfonated polysulfone composite membranes as PEM for direct methanol fuel cell application
resolves10.1016/j.jpowsour.2016.10.014
Improving the performances of Nafion™-based membranes for microbial fuel cells with silica-based, organically-functionalized mesostructured fillers
resolves10.1016/j.bej.2018.03.013
Modifying proton exchange membrane in a microbial fuel cell by adding clay mineral to improve electricity generation without reducing removal of toluene
resolves10.1016/j.carbon.2012.05.029
Observation of mechanical percolation in functionalized graphene oxide/elastomer composites
resolves10.1016/j.jnoncrysol.2019.119520
Protonic conductivity and thermal properties of cross-linked PVA/TiO2 nanocomposite polymer membranes
resolves10.1016/j.polymertesting.2020.106752
Synthesis and characterization of bisulfonated poly(vinyl alcohol)/graphene oxide composite membranes with improved proton exchange capabilities
resolves10.1016/j.rser.2017.09.081
Graphene oxide: A promising membrane material for fuel cells
resolves10.1016/S0169-4332(03)00550-6
Electrical conductivity of conductive carbon blacks: influence of surface chemistry and topology
resolves10.1016/j.jtice.2016.02.001
Modifying membrane anode in a microbial fuel cell to improve removal of gaseous ethyl acetate without reducing generation of electricity
resolves10.3390/nano9030397
Crosslinked Sulfonated Poly(vinyl alcohol)/Graphene Oxide Electrospun Nanofibers as Polyelectrolytes
resolves10.1016/j.memsci.2011.07.010
Crosslinked sulfonated poly(vinyl alcohol)/sulfonated multi-walled carbon nanotubes nanocomposite membranes for direct methanol fuel cells
resolves10.1016/j.talanta.2008.05.019
Response surface methodology (RSM) as a tool for optimization in analytical chemistry
resolves10.1016/j.ijhydene.2020.09.023
Optimization of process parameters using response surface methodology (RSM) for power generation via electrooxidation of glycerol in T-Shaped air breathing microfluidic fuel cell (MFC)
resolves10.1016/j.bej.2019.01.015
Towards the optimisation of ceramic-based microbial fuel cells: A three-factor three-level response surface analysis design
resolves10.1016/j.jpowsour.2020.228400
Statistical optimization of process parameters in microbial fuel cell for enhanced power production using Sulphonated Polyhedral Oligomeric Silsesquioxane dispersed Sulphonated Polystyrene Ethylene Butylene Polystyrene nanocomposite membranes
resolves10.1016/j.fuel.2019.116847
Synthesis, characterization and application of S-TiO2/PVDF-g-PSSA composite membrane for improved performance in MFCs
resolves10.1016/j.apenergy.2018.10.105
Enhancement of power generation by microbial fuel cells in treating toluene-contaminated groundwater: Developments of composite anodes with various compositions
resolves10.1021/cm048632y
Structural Organization of Poly(vinyl alcohol) Hydrogels Obtained by Freezing and Thawing Techniques:  A SANS Study
resolves10.1016/j.electacta.2017.03.128
Theodor von Grotthuss’ Contribution to Electrochemistry
resolves10.1007/s10008-007-0306-4
The effect of ferric ions on the conductivity of various types of polymer cation exchange membranes
resolves10.1016/j.cej.2018.03.093
Enhanced gaseous ethyl acetate degradation and power generation by a bioelectrochemical system
resolves10.1016/j.bioelechem.2019.06.002
Microbial fuel cell performance of graphitic carbon functionalized porous polysiloxane based ceramic membranes
resolves10.1016/j.memsci.2015.10.032
Proton conducting poly(vinyl alcohol) (PVA)/ poly(2-acrylamido-2-methylpropane sulfonic acid) (PAMPS)/ zeolitic imidazolate framework (ZIF) ternary composite membrane
resolves10.1016/j.tca.2011.04.016
Kinetic studies of the degradation of poly(vinyl alcohol)-based proton-conducting membranes at low temperatures
resolves10.1016/j.polymertesting.2018.01.024
Dielectric relaxations and conductivity of cross-linked PVA/SSA/GO composite membranes for fuel cells
resolves10.1016/j.memsci.2020.118735
Insight from perfectly selective and ultrafast proton transport through anhydrous asymmetrical graphene oxide membranes under Grotthuss mechanism
resolves10.1016/j.electacta.2018.12.024
Addition of reduced graphene oxide to an activated-carbon cathode increases electrical power generation of a microbial fuel cell by enhancing cathodic performance
resolves10.1016/j.ijhydene.2012.04.155
Sulfonated poly(ether ether ketone)/poly(ether sulfone) composite membranes as an alternative proton exchange membrane in microbial fuel cells
resolves10.1016/j.memsci.2006.03.025
Preparation of ion exchange membranes for fuel cell based on crosslinked poly(vinyl alcohol) with poly(styrene sulfonic acid-co-maleic acid)
resolves10.1016/j.memsci.2016.04.062
Nanohybrids of graphene oxide chemically-bonded with Nafion: Preparation and application for proton exchange membrane fuel cells
resolves10.1016/j.ijhydene.2016.08.186
Continuous production of power using microbial fuel cells with integrated biotrickling filter for ethyl acetate-contaminated air stream treatment
resolves10.1039/C5RA16068E
Acid catalysed cross-linking of poly vinyl alcohol (PVA) by glutaraldehyde: effect of crosslink density on the characteristics of PVA membranes used in single chambered microbial fuel cells
resolves10.1016/j.matchemphys.2019.122025
Novel low cost proton exchange membrane made from sulphonated biochar for application in microbial fuel cells
resolves10.1016/j.biombioe.2020.105781
Increased power generation from a new sandwich-type microbial fuel cell (ST-MFC) with a membrane-aerated cathode
resolves10.1016/j.cej.2017.11.014
Current advances of VOCs degradation by bioelectrochemical systems: A review
The 4 references without a DOI — listed, not checked
no DOI — not checked10.1016/j.jpowsour.2021.230368_bib17
no DOI — not checkedFabrication and characterization of poly (vinyl alcohol) – graphene nanoplatelets (GNPs) proton exchange membrane for direct methanol fuel cells
no DOI — not checked10.1016/j.jpowsour.2021.230368_bib33
no DOI — not checked10.1016/j.jpowsour.2021.230368_bib41
What this badge says. CiteStamped means the CHECKABLE references of this work were clean at the dated check: each resolved to a known work in a public registry, and none carried a retraction notice at that time. It says nothing about the quality, findings, or importance of the work itself, and nothing about references deposited without a DOI.

checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record

Embed this badge

Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.

<a href="https://citestamp.com/citestamped/10.1016/j.jpowsour.2021.230368"><img src="https://citestamp.com/citestamped/10.1016/j.jpowsour.2021.230368/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[![CiteStamped reference-health badge](https://citestamp.com/citestamped/10.1016/j.jpowsour.2021.230368/badge.svg)](https://citestamp.com/citestamped/10.1016/j.jpowsour.2021.230368)