Reference health
One-step fabrication and characterization of reinforced microcomposite membranes for polymer electrolyte membrane fuel cells
39/39 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
1 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 39 checked references that resolve
resolves10.1023/A:1017558523354
Phosphoric acid doped polybenzimidazole membranes: Physiochemical characterization and fuel cell applications
resolves10.1016/S0032-3861(03)00580-9
Processing induced morphological development in hydrated sulfonated poly(arylene ether sulfone) copolymer membranes
resolves10.1002/fuce.200400020
PBI‐Based Polymer Membranes for High Temperature Fuel Cells – Preparation, Characterization and Fuel Cell Demonstration
resolves10.1016/j.memsci.2008.08.025
Preparation and characterization of Nafion/SPEEK layered composite membrane and its application in vanadium redox flow battery
resolves10.1016/j.jpowsour.2008.11.104
Maximization of high-temperature proton exchange membrane fuel cell performance with the optimum distribution of phosphoric acid
resolves10.1016/j.jpowsour.2009.12.022
High temperature polymer electrolyte membrane fuel cell performance of PtxCoy/C cathodes
resolves10.1016/j.desal.2013.06.013
Simultaneous wastewater treatment and electricity generation by microbial fuel cell: Performance comparison and cost investigation of using Nafion 117 and SPEEK as separators
resolves10.1016/j.energy.2015.10.045
Effects of clamping force on the water transport and performance of a PEM (proton electrolyte membrane) fuel cell with relative humidity and current density
resolves10.1021/ma020850u
Structure and Permeation Characteristics of an Aqueous Ethanol Solution of Organic−Inorganic Hybrid Membranes Composed of Poly(vinyl alcohol) and Tetraethoxysilane
resolves10.1016/j.jpowsour.2008.10.070
Performance of organic–inorganic hybrid anion-exchange membranes for alkaline direct methanol fuel cells
resolves10.1039/b922650h
Proton-conducting membranes based on benzimidazole polymers for high-temperature PEM fuel cells. A chemical quest
resolves10.1039/B9PY00235A
Progress in ionic organic-inorganic composite membranes for fuelcell applications
resolves10.1002/adfm.201300376
A Critical Revision of the Nano‐Morphology of Proton Conducting Ionomers and Polyelectrolytes for Fuel Cell Applications
resolves10.1016/j.jpowsour.2012.11.126
High temperature (HT) polymer electrolyte membrane fuel cells (PEMFC) – A review
resolves10.1016/j.memsci.2014.01.072
Sulfonated poly(arylene sulfone) multiblock copolymers for proton exchange membrane fuel cells
resolves10.1007/s10965-015-0844-x
Preparation of superhydrophobic and self-cleaning polysulfone non-wovens by electrospinning: influence of process parameters on morphology and hydrophobicity
resolves10.1021/cr500519c
Carbon-Supported Pt-Based Alloy Electrocatalysts for the Oxygen Reduction Reaction in Polymer Electrolyte Membrane Fuel Cells: Particle Size, Shape, and Composition Manipulation and Their Impact to Activity
resolves10.1016/j.memsci.2016.02.027
Synthesis of sulfonated poly(arylene ether ketone) block copolymers for proton exchange membrane fuel cells
resolves10.1002/polb.20863
Mechanical endurance of polymer electrolyte membrane and PEM fuel cell durability
resolves10.1016/j.jpowsour.2007.03.061
A degradation study of Nafion proton exchange membrane of PEM fuel cells
resolves10.1016/j.memsci.2010.02.060
Deterioration of mechanical properties: A cause for fuel cell membrane failure
resolves10.1016/j.jpowsour.2014.01.106
Membrane degradation during combined chemical and mechanical accelerated stress testing of polymer electrolyte fuel cells
resolves10.1016/j.memsci.2013.10.018
Nafion/graphene oxide composite membranes for low humidifying polymer electrolyte membrane fuel cell
resolves10.1021/am5000504
SGO/SPES-Based Highly Conducting Polymer Electrolyte Membranes for Fuel Cell Application
resolves10.1016/j.ssi.2017.08.019
Proton conducting nanocomposite membranes of nanocellulose reinforced poly(arylene ether ketone)s containing sulfonic/carboxylic groups
resolves10.1016/j.jpowsour.2016.10.094
Simple fabrication of 12 μm thin nanocomposite fuel cell membranes by direct electrospinning and printing
resolves10.1016/j.cej.2014.05.145
Sulfonated polyether ether ketone (SPEEK)-based composite proton exchange membrane reinforced with nanofibers for microbial electrolysis cells
resolves10.1016/j.memsci.2013.10.070
Preparation of a novel antifouling mixed matrix PES membrane by embedding graphene oxide nanoplates
resolves10.1016/j.memsci.2017.09.055
Mechanically stable nanofibrous sPEEK/Aquivion® composite membranes for fuel cell applications
resolves10.1016/S0376-7388(02)00579-3
Pore-filling type polymer electrolyte membranes for a direct methanol fuel cell
resolves10.1016/j.memsci.2013.06.032
Characterisation of PAMPS–PSS pore-filling membrane for direct methanol fuel cell
resolves10.1016/j.memsci.2017.07.060
Pore-filling polymer electrolyte membrane based on poly (arylene ether ketone) for enhanced dimensional stability and reduced methanol permeability
resolves10.1016/j.electacta.2005.11.012
Preparation of highly dispersed SiO2 and Pt particles in Nafion®112 for self-humidifying electrolyte membranes in fuel cells
The 1 reference without a DOI — listed, not checked
no DOI — not checkedThe membrane durability in PEM fuel cells
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1016/j.memsci.2018.06.060"><img src="https://citestamp.com/citestamped/10.1016/j.memsci.2018.06.060/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1016/j.memsci.2018.06.060)