Reference health
Styrene intermolecular associating incorporated-polyacrylamide flooding of crude oil in carbonate coated micromodel system at high temperature, high salinity condition: Rheology, wettability alteration, recovery mechanisms
91/91 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
6 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 91 checked references that resolve
resolves10.1016/j.molliq.2020.113082
Experimental, computational and simulation oversight of silica-co-poly acrylates composite prepared by surfactant-stabilized emulsion for polymer flooding in unconsolidated sandstone reservoirs
resolves10.1016/j.petrol.2020.108172
An introductory investigation of a polymeric surfactant from a new natural source in chemical enhanced oil recovery (CEOR)
resolves10.1016/j.fuel.2020.117251
Polymer nanoparticles based nano-fluid for enhanced oil recovery at harsh formation conditions
resolves10.1016/j.fuel.2017.10.060
Experimental study of combining low salinity water flooding and preformed particle gel to enhance oil recovery for fractured carbonate reservoirs
resolves10.1016/j.powtec.2020.06.033
Impact of anionic and cationic surfactants interfacial tension on the oil recovery enhancement
resolves10.1039/C8RA02901F
A novel binary flooding system of a biobased surfactant and hydrophobically associating polymer with ultralow interfacial tensions
resolves10.3997/2214-4609.202010596
Experimental Investigation of Using Ionic-Liquids as Alternatives of Surfactants in Enhanced-Oil-Recovery Processes for Harsh Carbonate Reservoirs
resolves10.1016/j.molliq.2019.04.145
A novel interface-active cationic flocculant for the oil-water separation of oily wastewater produced from polymer flooding
resolves10.1016/j.petrol.2016.01.023
Heavy oil polymer flooding from laboratory core floods to pilot tests and field applications: Half-century studies
resolves10.3997/2214-4609.202010700
Applying the Synergistic Effect of Chemically Low Salinity Water Flooding Assisted Fines Migration in Coated Micromodel
resolves10.1016/j.petrol.2020.107690
An investigation on sensitivity analysis and performance prediction of profile control by clay particles for polymer flooded reservoir
resolves10.1080/15583724.2014.982821
Review on Polymer Flooding: Rheology, Adsorption, Stability, and Field Applications of Various Polymer Systems
resolves10.1021/acsomega.9b00717
Comparative Study on Enhancing Oil Recovery under High Temperature and High Salinity: Polysaccharides Versus Synthetic Polymer
resolves10.1016/j.petrol.2020.107290
Advanced oil recovery by high molar mass thermoassociating graft copolymers
resolves10.1016/j.molliq.2020.114931
Experimental study on viscosity and flow characteristics of a clay-intercalated polymer
resolves10.1016/j.petrol.2017.10.069
Low salinity polymer flooding: Lower polymer retention and improved injectivity
resolves10.1016/j.petrol.2019.106211
Oil recovery by low-salinity polymer flooding in carbonate oil reservoirs
resolves10.2523/IPTC-17084-MS
Development of Chemical EOR Formulations for a High Temperature and High Salinity Carbonate Reservoir
resolves10.1021/acs.energyfuels.9b00407
Study of Surfactant–Polymer Flooding in High-Temperature and High-Salinity Carbonate Rocks
resolves10.1021/acs.energyfuels.6b02653
Comparative Studies on Enhanced Oil Recovery: Thermoviscosifying Polymer Versus Polyacrylamide
resolves10.1021/ie5014986
Evaluation of Two New Self-assembly Polymeric Systems for Enhanced Heavy Oil Recovery
resolves10.1016/j.petrol.2020.108029
Molecular dynamic simulation and experimental study of wettability alteration by hydrolyzed polyacrylamide for enhanced oil recovery: A new finding for polymer flooding process
resolves10.1002/app.47753
Inverse emulsion polymerization of triple monomers of acrylamide, maleic anhydride, and styrene to achieve highly hydrophilic–hydrophobic modified polyacrylamide
resolves10.1016/j.ejpe.2016.10.012
Evaluation of solution and rheological properties for hydrophobically associated polyacrylamide copolymer as a promised enhanced oil recovery candidate
resolves10.2523/11635-MS
Application of Hydrophobically Associating Water-soluble Polymer for Polymer Flooding in China Offshore Heavy Oilfield
resolves10.1155/2018/9653953
Performance Evaluation of STARPAM Polymer and Application in High Temperature and Salinity Reservoir
resolves10.1016/j.heliyon.2019.e02113
Application of polymer integration technique for enhancing polyacrylamide (PAM) performance in high temperature and high salinity reservoirs
resolves10.1016/j.molliq.2017.02.113
Synthesis of novel water soluble poly (ionic liquids) based on quaternary ammonium acrylamidomethyl propane sulfonate for enhanced oil recovery
resolves10.1002/app.21723
Solution properties of ionic hydrophobically associating polyacrylamide with an arylalkyl group
resolves10.1016/j.eurpolymj.2016.08.022
Facile synthesis of cauliflower-like hydrophobically modified polyacrylamide nanospheres by aerosol-photopolymerization
resolves10.1016/j.molliq.2020.113358
Effect of hydrophobic group content on the properties of betaine-type binary amphiphilic polymer
resolves10.1016/j.progpolymsci.2011.05.006
Polymers for enhanced oil recovery: A paradigm for structure–property relationship in aqueous solution
resolves10.1016/S0920-4105(97)00048-X
Water-soluble hydrophobically associating polymers for improved oil recovery: A literature review
resolves10.1016/j.petrol.2019.06.016
Hydrophobically associating polymers for enhanced oil recovery – Part A: A review on the effects of some key reservoir conditions
resolves10.1021/ef3002185
Displacement Characters of Combination Flooding Systems consisting of Gemini-Nonionic Mixed Surfactant and Hydrophobically Associating Polyacrylamide for Bohai OffshoreOilfield
resolves10.11648/j.ogce.20150304.11
Synthesis and Characterization of Polyacrylamide Crosslinked Copolymer for Enhanced Oil Recovery and Rock Wettability Alteration
resolves10.1021/acsomega.0c00548
Wettability Control of Interfaces for High-Performance Organic Thin-Film Transistors by Soluble Insulating Polymer Films
resolves10.1016/j.ejpe.2015.03.014
Solution properties of hydrophobically modified polyacrylamides and their potential use for polymer flooding application
resolves10.2118/157916-MS
Associative Polymers Outperform Regular Polymers Displacing Heavy Oil in Heterogeneous Systems
resolves10.1016/j.polymer.2007.09.040
Synthesis of graft polyacrylamide with responsive self-assembling properties in aqueous media
resolves10.1002/pen.11589
Synthesis and solution properties of poly(acrylamide‐styrene) block copolymers with high hydrophobic content
resolves10.1021/ma00009a034
Photophysical characterization of water-soluble styrene-grafted poly(acrylamide) copolymers
resolves10.1021/ma801365q
Preparation and Self-Assembled Toroids of Amphiphilic Polystyrene-C<sub>60</sub>-Poly(<i>N</i>-isopropylacrylamide) Block Copolymers
resolves10.1002/pat.2075
Synthesis of styrene–acrylamide copolymer by surfactant‐free sonicated dynamic interfacial polymerization
resolves10.1002/ente.201600036
Nanostructured Particles for Controlled Polymer Release in Enhanced Oil Recovery
resolves10.1007/s10965-016-1064-8
Synthesis, characterization, rheological properties and hydrophobic nano-association of acrylamide/styrene and acrylamide/sodium styrene sulfonate/styrene co- and terpolymers
resolves10.1002/app.49905
Surfactant‐free synthesis of poly (styrene‐<i>co</i>‐acrylamide) monodisperse nanoparticles using hybrid flow‐to‐batch chemistry
resolves10.1016/j.cej.2020.126939
Synthesis and characterization of highly hydrophilic self-associating terpolymers: Rheological, thermal, and corrosion protection studies
resolves10.1016/j.molliq.2020.113700
Direct insights into the micro and macro scale mechanisms of symbiotic effect of SO42−, Mg2+, and Ca2+ ions concentration for smart waterflooding in the carbonated coated micromodel system
resolves10.1007/s00396-015-3803-5
High molecular weight polyacrylamide nanoparticles prepared by inverse emulsion polymerization: reaction conditions-properties relationships
resolves10.3390/polym11101605
Elucidation of the Relationship between Intrinsic Viscosity and Molecular Weight of Cellulose Dissolved in Tetra-N-Butyl Ammonium Hydroxide/Dimethyl Sulfoxide
resolves10.1021/acsomega.9b00963
Stabilization of Polymer Nanocomposites in High-Temperature and High-Salinity Brines
resolves10.1016/j.molliq.2019.112102
Smart water spontaneous imbibition into oil-wet carbonate reservoir cores: Symbiotic and individual behavior of potential determining ions
resolves10.1021/acs.iecr.8b00540
Silica Nanoparticle Assisted Polymer Flooding of Heavy Crude Oil: Emulsification, Rheology, and Wettability Alteration Characteristics
resolves10.1016/j.fuel.2015.02.060
Carbonate and sandstone reservoirs wettability improvement without using surfactants for Chemical Enhanced Oil Recovery (C-EOR)
resolves10.1016/j.fuel.2019.01.074
An experimental investigation into the spontaneous imbibition of surfactant assisted low salinity water in carbonate rocks
resolves10.1039/C8LC00793D
Mechanisms of multiphase reactive flow using biogenically calcite-functionalized micromodels
resolves10.1016/j.petrol.2013.07.001
Experimental and numerical investigation of polymer flooding in fractured heavy oil five-spot systems
resolves10.1002/cjce.22445
Heavy oil recovery using ASP flooding: A pore‐level experimental study in fractured five‐spot micromodels
resolves10.1260/0144-5987.30.5.689
Experimental Study of Polymer Flooding in Fractured Systems Using Five-Spot Glass Micromodel: The Role of Fracture Geometrical Properties
resolves10.1039/C5LC00544B
Functionalization of micromodels with kaolinite for investigation of low salinity oil-recovery processes
resolves10.1016/j.fuel.2016.07.076
Visual investigation of the effects of clay minerals on enhancement of oil recovery by low salinity water flooding
resolves10.1016/j.fuel.2018.10.104
Pore-level visual analysis of heavy oil recovery using chemical-assisted waterflooding process – Use of a new chemical agent
resolves10.1016/j.jcis.2005.10.037
An in situ ATR–FTIR study of polyacrylamide adsorption at the talc surface
resolves10.1039/c3ra41733f
Characterization of iron impregnated polyacrylamide catalyst and its application to the treatment of municipal wastewater
resolves10.29047/01225383.469
SYNTHESIS AND CHARACTERIZATION OF THE POLYSTYRENE - ASPHALTENE GRAFT COPOLYMER BY FT-IR SPECTROSCOPY
resolves10.1016/j.ejpe.2013.11.007
Synthesis and characterization of high molecular weight hydrophobically modified polyacrylamide nanolatexes using novel nonionic polymerizable surfactants
resolves10.1016/j.rinp.2017.06.027
Spectroscopic and thermal analysis of polyacrylamide/chitosan (PAM/CS) blend loaded by gold nanoparticles
resolves10.1016/S0001-8686(98)00077-3
Hydrophobically-modified polyacrylamides prepared by micellar polymerization1Part of this paper was presented at the conference on `Associating Polymer', Fontevraud, France, November 1997.1
resolves10.3390/ma9010016
Characterization of a Polyacrylamide Solution Used for Remediation of Petroleum Contaminated Soils
resolves10.1016/j.petrol.2018.12.012
Impact of different injection sites on the water and oil exchange in a fractured porous medium for different polymers: A visual study
resolves10.1002/app.38893
A water‐soluble acrylamide hydrophobically associating polymer: Synthesis, characterization, and properties as EOR chemical
resolves10.1007/s10965-015-0828-x
Synthesis, microstructural characterization and hydrophobic intermolecular nano-aggregation behavior of acrylamide/2-acrylamido-2-methy-1-propane sulfonic acid/butyl acrylate co- and terpolymers
resolves10.1016/S0014-3057(02)00034-4
Synthesis and solution behavior of hydrophobic association water-soluble polymers containing arylalkyl group
resolves10.1016/j.petrol.2019.106739
The role of salinity and aging time on carbonate reservoir in low salinity seawater and smart seawater flooding
resolves10.1016/j.fuel.2020.118492
On time dependency of interfacial tension through low salinity carbonated water injection
resolves10.1016/j.molliq.2019.112173
Smart water effects on a crude oil-brine-carbonate rock (CBR) system: Further suggestions on mechanisms and conditions
resolves10.1016/j.molliq.2020.113250
Sustaining sulfate ions throughout smart water flooding by nanoparticle based scale inhibitors
resolves10.1016/j.colsurfa.2019.124144
Favorable attributes of low salinity water aided alkaline on crude oil-brine-carbonate rock system
resolves10.1016/j.colsurfa.2020.125604
A mechanistic understanding of the water-in-heavy oil emulsion viscosity variation: effect of asphaltene and wax migration
resolves10.1021/acs.energyfuels.0c03371
Mechanistic Investigation of the Synergy of a Wide Range of Salinities and Ionic Liquids for Enhanced Oil Recovery: Fluid–Fluid Interactions
resolves10.1016/j.molliq.2019.112125
Formation and stability of W/O emulsions in presence of asphaltene at reservoir thermodynamic conditions
The 6 references without a DOI — listed, not checked
no DOI — not checked10.1016/j.molliq.2021.116206_b0035
no DOI — not checkedA comparative study of the mechanism and performance of surfactant-and alkali-polymer flooding in heavy-oil recovery
no DOI — not checkedStability, flocculation, and rheological behavior of silica suspension-augmented polyacrylamide and the possibility to improve polymer flooding functionality
no DOI — not checkedA comprehensive comparative appraisal of standard HPAM polymer and salt tolerant polymer KYPAM for EOR
no DOI — not checkedCopolymerization of acrylamide and styrene. II. Reactivity ratios with unperturbed acrylamide
no DOI — not checkedUnderlying mechanisms of shale wettability alteration by low salinity water injection (LSWI)
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1016/j.molliq.2021.116206"><img src="https://citestamp.com/citestamped/10.1016/j.molliq.2021.116206/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1016/j.molliq.2021.116206)