Reference health
Homogenization stage during TLP bonding of RAFM steel with a Fe–Si–B interlayer: Microstructure evolution and mechanical properties
40/40 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
3 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 40 checked references that resolve
resolves10.1016/j.jnucmat.2007.03.036
Status of reduced activation ferritic/martensitic steel development
resolves10.1016/j.msea.2018.10.023
The correlation among microstructural parameter and dynamic strain aging (DSA) in influencing the mechanical properties of a reduced activated ferritic-martensitic (RAFM) steel
resolves10.1016/j.jnucmat.2010.12.248
Review of candidate welding processes of RAFM steels for ITER test blanket modules and DEMO
resolves10.1016/j.intermet.2011.05.016
The formation of intermetallics in dissimilar Ti6Al4V/copper/AISI 316 L electron beam and Nd:YAG laser joints
resolves10.1016/j.fusengdes.2005.07.015
Joining technologies of reduced activation ferritic/martensitic steel for blanket fabrication
resolves10.1016/j.jnucmat.2010.12.169
TIG and HIP joining of Reduced Activation Ferrite/Martensitic steel for the Korean ITER–TBM
resolves10.1007/s12540-009-0465-1
HIP joining of RAFM/RAFM steel and beryllium/RAFM steel for fabrication of the ITER TBM first wall
resolves10.1179/1743280412Y.0000000016
Review of type IV cracking of weldments in 9–12%Cr creep strength enhanced ferritic steels
resolves10.1016/j.jmapro.2019.05.020
Study on microstructure and mechanical properties of direct diffusion bonded low-carbon RAFM steels
resolves10.1016/j.jnucmat.2014.08.004
Verification of the effect of surface preparation on Hot Isostatic Pressing diffusion bonding joints of CLAM steel
resolves10.1023/A:1015356930476
The microstructural observation and wettability study of brazing Ti-6Al-4V and 304 stainless steel using three braze alloys
resolves10.1016/j.matchar.2009.05.012
Characterization of transient-liquid-phase-bonded joints in a duplex stainless steel with a Ni–Cr–B insert alloy
resolves10.1016/j.msea.2006.10.045
Transient liquid phase bonding of Inconel 718 and Inconel 625 with BNi-2: Modeling and experimental investigations
resolves10.1016/j.ceramint.2017.03.084
Investigate the influence of bonding temperature in transient liquid phase bonding of SiC and copper
resolves10.1016/j.msea.2007.11.133
Transient liquid-phase bonding of T91 steel pipes using amorphous foil
resolves10.1016/j.jallcom.2017.01.091
Effect of bonding time on the joint properties of transient liquid phase bonding between Ti--6Al--4V and AISI 304
resolves10.1016/j.matdes.2016.03.101
Effect of bonding temperature on the microstructure and mechanical properties of Ti-6Al-4V to AISI 304 transient liquid phase bonded joint
resolves10.1016/j.jmapro.2017.09.010
Characterization of microstructure and mechanical properties of dissimilar TLP bonding between IN718/IN600 with BNi-2 interlayer
resolves10.1016/j.matdes.2015.09.104
Transient liquid phase bonding of CLAM/CLAM steels with Ni-based amorphous foil as the interlayer
resolves10.1016/0001-6160(88)90026-0
Overview no. 63 Non-equilibrium grain boundary segregation of boron in austenitic stainless steel—IV. Precipitation behaviour and distribution of elements at grain boundaries
resolves10.1080/13621718.2017.1327934
Role of base-metal composition in isothermal solidification during diffusion brazing of nickel-based superalloys
resolves10.1016/j.scriptamat.2018.05.046
Three-dimensional atom probe analysis of boron segregation at austenite grain boundary in a low carbon steel - Effects of boundary misorientation and quenching temperature
resolves10.1016/j.scriptamat.2005.11.055
A grain boundary characterization study of boron segregation and carbide precipitation in alloy 304 austenitic stainless steel
resolves10.1016/j.actamat.2017.05.021
Atomic-scale study on segregation behavior at austenite grain boundaries in boron- and molybdenum-added steels
resolves10.1007/s42243-018-0023-5
Crystallographic analysis of lath martensite in a 13Cr-5Ni steel by electron backscattering diffraction
resolves10.1016/j.matchemphys.2017.11.019
Effects of austenite regeneration heat treatment on the TLP bonding of duplex stainless steel UNS S32750 using Fe-B-Si insert metal
resolves10.1080/14786435.2014.885136
Isothermal solidification stage during transient liquid-phase bonding single-crystal superalloys
resolves10.1016/j.matchemphys.2007.05.049
Effect of alloying elements on the isothermal solidification during TLP bonding of SS 410 and SS 321 using a BNi-2 interlayer
resolves10.1016/j.jallcom.2013.11.161
Microstructural and mechanical characterizations of steel tubes joined by transient liquid phase bonding using an amorphous Fe–B–Si interlayer
resolves10.1016/j.msea.2019.03.124
Influence of bonding time on the transient liquid phase bonding behavior of Hastelloy X using Ni-Cr-B-Si-Fe filler alloy
resolves10.1016/j.jmatprotec.2008.04.014
Finite element modelling of brazed residual stress and its influence factor analysis for stainless steel plate-fin structure
resolves10.1016/j.msea.2019.138267
Post-bond heat treatment effects on the wide gap transient liquid phase bonding of Inconel 718 with BNi-2 paste filler metal
resolves10.1016/j.matchar.2019.04.006
Precipitates evolution during tempering of 9CrMoCoB (CB2) ferritic heat-resistant steel
resolves10.1016/j.jallcom.2018.08.265
Coarsening behavior of γ′ precipitates in the γ'+γ area of a Ni3Al-based alloy
The 3 references without a DOI — listed, not checked
no DOI — not checkedITER: the International Thermonuclear Experimental Reactor and the nuclear weapons proliferation implications of thermonuclear-fusion energy systems
no DOI — not checked10.1016/j.msea.2020.139205_bib29
no DOI — not checkedEffect of high-temperature ageing on microstructure and mechanical properties of linear friction welded S31042 steel joint
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1016/j.msea.2020.139205"><img src="https://citestamp.com/citestamped/10.1016/j.msea.2020.139205/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1016/j.msea.2020.139205)