Reference health
Comparative study on the microstructure evolution of selective laser melted and wrought IN718 superalloy during subsequent heat treatment process and its effect on mechanical properties
39/39 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
8 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 39 checked references that resolve
resolves10.1016/j.msea.2019.138282
Study on the microstructure and creep behavior of Inconel 718 superalloy fabricated by selective laser melting
resolves10.1016/j.matdes.2017.05.065
Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting
resolves10.1146/annurev-matsci-070115-032024
Metal Additive Manufacturing: A Review of Mechanical Properties
resolves10.1016/j.scriptamat.2019.01.041
Improving creep resistance of nickel-based superalloy Inconel 718 by tailoring gamma double prime variants
resolves10.1016/j.jallcom.2017.05.042
Effect of hot deformation on γ″ and δ phase precipitation of Inconel 718 alloy during deformation&isothermal treatment
resolves10.1016/j.actamat.2015.04.035
Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: A fundamental alloy design approach
resolves10.1007/s00170-019-04204-0
Analysis of residual stress evolution during powder bed fusionprocess of AISI 316L stainless steel with experiment and numerical modeling
resolves10.1016/j.actamat.2018.10.032
The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing
resolves10.1007/s00170-019-03545-0
Effect of scanning strategy and speed on the microstructure and mechanical properties of selective laser melted IN718 nickel-based superalloy
resolves10.1016/j.msea.2018.03.073
Comparison of microstructures and mechanical properties of Inconel 718 alloy processed by selective laser melting and casting
resolves10.1016/j.jallcom.2018.01.030
Influence of stress on γ″ precipitation behavior in Inconel 718 during aging
resolves10.1016/j.matchar.2018.01.006
Investigations of γ′, γ″ and δ precipitates in heat-treated Inconel 718 alloy fabricated by selective laser melting
resolves10.1016/j.matdes.2016.07.078
In-situ residual stress analysis during annealing treatments using neutron diffraction in combination with a novel furnace design
resolves10.1016/j.msea.2013.09.049
Hot deformation behavior and processing map of a typical Ni-based superalloy
resolves10.1016/j.jallcom.2015.07.149
Effects of cold rolling on the precipitation kinetics and the morphology evolution of intermediate phases in Inconel 718 alloy
resolves10.1007/s11661-019-05538-w
Study of Residual Stresses in Additively Manufactured Ti-6Al-4V by Neutron Diffraction Measurements
resolves10.1016/j.matdes.2016.03.111
Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts
resolves10.1016/j.msea.2015.05.035
Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting
resolves10.1016/j.scriptamat.2019.09.010
The effect of S doping on the superconductivity and nematicity transition of FeSe
resolves10.1016/j.optlastec.2012.06.043
Effect of overlap rate on recrystallization behaviors of Laser Solid Formed Inconel 718 superalloy
resolves10.1016/j.jallcom.2014.06.172
The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy
resolves10.1016/j.jallcom.2017.11.327
Phase transformations and grain growth behaviors in superalloy 718
resolves10.1016/j.jmst.2019.08.010
Synthesis of W-Y2O3 alloys by freeze-drying and subsequent low temperature sintering: Microstructure refinement and second phase particles regulation
resolves10.1016/j.jmst.2019.05.067
Controlled synthesis of high-quality W-Y2O3 composite powder precursor by ascertaining the synthesis mechanism behind the wet chemical method
resolves10.1016/j.msea.2011.10.014
Effect of serrated grain boundaries on the creep property of Inconel 718 superalloy
resolves10.1016/j.scriptamat.2019.10.005
Strengthening and hardening mechanisms of additively manufactured stainless steels: The role of cell sizes
resolves10.1016/j.mattod.2017.11.004
Dislocation network in additive manufactured steel breaks strength–ductility trade-off
resolves10.1016/j.actamat.2016.08.027
Modelling the nucleation, growth and coarsening kinetics of γ″ (D022) precipitates in the Ni-base Alloy 625
resolves10.1007/s10853-017-1091-9
Evaluation of classical precipitation descriptions for $$\gamma ^{\prime \prime } \,(\hbox {Ni}_{3}\hbox {Nb}{-}\hbox {D0}_{22})$$ γ ″ ( Ni 3 Nb - D0 22 ) in Ni-base superalloys
resolves10.1016/j.matchar.2018.06.020
Microstructural characterization of laser metal powder deposited Alloy 718
resolves10.1016/j.scriptamat.2007.06.063
Coupling effect of multiple precipitates on the ductile fracture of aged Al–Mg–Si alloys
resolves10.1016/j.actamat.2015.07.048
On the prediction of the yield stress of unimodal and multimodal γ ′ Nickel-base superalloys
resolves10.1016/j.msea.2020.139139
Effects of alloying elements on microstructure and mechanical properties of Co–Ni–Al–Ti superalloy
resolves10.1016/j.msea.2017.12.043
Microstructure and mechanical properties of Inconel 718 produced by selective laser melting: Sample orientation dependence and effects of post heat treatments
resolves10.1016/j.matlet.2015.10.136
Microstructure and mechanical properties of selective laser melted Inconel 718 compared to forging and casting
resolves10.1016/j.ijhydene.2018.08.179
Tensile mechanical properties and fracture behaviors of nickel-based superalloy 718 in the presence of hydrogen
resolves10.1016/j.matdes.2017.01.069
Effects of processing routes on room temperature tensile strength and elongation for Inconel 718
resolves10.1007/s11661-006-0149-0
The effect of sheet processing on the microstructure, tensile, and creep behavior of INCONEL alloy 718
The 8 references without a DOI — listed, not checked
no DOI — not checked10.1016/j.msea.2020.139735_bib3
no DOI — not checked10.1016/j.msea.2020.139735_bib4
no DOI — not checkedSuperalloy 718: evolution of the alloy from high to low temperature application
no DOI — not checked10.1016/j.msea.2020.139735_bib20
no DOI — not checked10.1016/j.msea.2020.139735_bib22
no DOI — not checked10.1016/j.msea.2020.139735_bib24
no DOI — not checked10.1016/j.msea.2020.139735_bib28
no DOI — not checked10.1016/j.msea.2020.139735_bib30
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1016/j.msea.2020.139735"><img src="https://citestamp.com/citestamped/10.1016/j.msea.2020.139735/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1016/j.msea.2020.139735)