Reference health
Precipitation behavior in boundaries and its influence on impact toughness in 22Cr25Ni3W3CuCoNbN steel during short-term ageing
35/35 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
8 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 35 checked references that resolve
resolves10.1007/s11085-016-9662-8
Phase Investigations Under Steam Oxidation Process at 800 °C for 1000 h of Advanced Steels and Ni-Based Alloys
resolves10.1016/j.msea.2014.12.057
First-principles evaluation of the effect of alloying elements on the lattice parameter of a 23Cr25NiWCuCo austenitic stainless steel to model solid solution hardening contribution to the creep strength
resolves10.1016/j.corsci.2015.10.030
Microstructure and chemical composition of the oxide scale formed on the sanicro 25 steel tubes after fireside corrosion
resolves10.1016/j.msea.2020.139944
Evolution of the microstructure and mechanical properties of HR3C austenitic stainless steel after ageing for up to 30,000 h at 650–750 °C
resolves10.1016/j.actamat.2015.09.006
Phenomenological and microstructural analysis of intermediate temperatures creep in a Ni–Fe-based alloy for advanced ultra-supercritical fossil power plants
resolves10.1016/j.jallcom.2018.11.137
Role of grain boundary engineered microstructure on high temperature steam oxidation behaviour of Ni based superalloy alloy 617
resolves10.1016/j.msea.2013.09.076
Microstructure evolution and mechanical properties of Inconel 740H during aging at 750 °C
resolves10.37358/RC.17.4.5541
The Influence of the Temperature and Ageing Time on the NiCr23Co12Mo Alloy Microstructure
resolves10.1179/174892408X382860
Long term creep properties and microstructure of SUPER304H, TP347HFG and HR3C for A-USC boilers
resolves10.1016/j.msea.2016.10.077
Microstructure evolution in HR3C austenitic steel during long-term creep at 650°C
resolves10.1016/j.actamat.2015.11.004
Intergranular damage during stress relaxation in AISI 316L-type austenitic stainless steels: Effect of carbon, nitrogen and phosphorus contents
resolves10.1016/j.actamat.2017.03.045
The effect of microstructure evolution on the mechanical properties of martensite ferritic steel during long-term aging
resolves10.1016/j.actamat.2017.10.010
The effect of phase parameter variation on hardness of P91 components after service exposures at 530–550 °C
resolves10.1016/j.msea.2012.07.090
Creep behavior and microstructure evolution at 750°C in a new precipitation-strengthened heat-resistant austenitic stainless steel
resolves10.1016/j.msea.2020.138991
Strengthening mechanisms and creep rupture behavior of advanced austenitic heat resistant steel SA-213 S31035 for A-USC power plants
resolves10.1016/j.msea.2019.03.086
Precipitate evolution during the aging of Super304H steel and its influence on impact toughness
resolves10.1016/j.msea.2018.10.084
Impact toughness of a modified HR3C austenitic steel after long-term thermal exposure at 650 °C
resolves10.1515/amm-2016-0129
The Effect of Long-Term Impact of Elevated Temperature on Changes in Microstructure and Mechanical Properties of HR3C Steel
resolves10.1016/S1359-6462(01)00975-7
A methodology for grain boundary plane assessment by single-section trace analysis
resolves10.1016/0001-6160(78)90046-9
A model for the formation of annealing twins in F.C.C. metals and alloys
resolves10.1016/0001-6160(67)90159-9
The shape and mechanism of formation of M23C6 carbide in austenite
resolves10.1557/jmr.2013.116
Precipitation kinetics of M<sub>23</sub>C<sub>6</sub> in T/P92 heat-resistant steel by applying soft-impingement correction
resolves10.1007/s10853-014-8221-4
Kinetic description for solid-state transformation using an approach of summation/product transition
resolves10.1016/S1006-706X(14)60139-4
Microstructure Evolution and Mechanical Properties of HR3C Steel during Long-term Aging at High Temperature
resolves10.5604/01.3001.0009.7100
Microstructure and mechanical properties of HR3C austenitic steel after service
The 8 references without a DOI — listed, not checked
no DOI — not checkedMicrostructure and phases of deposited metal of SUPER304H steel under high temperature Persistent stress
no DOI — not checkedMicrostructure evolution after long term high temperature exposure of 22-25Cr austenitic stainless steels
no DOI — not checked10.1016/j.msea.2021.140924_bib19
no DOI — not checkedLong term performance of newly developed austenitic heat resistant stainless steel grade UNS S31035
no DOI — not checked10.1016/j.msea.2021.140924_bib35
no DOI — not checked10.1016/j.msea.2021.140924_bib37
no DOI — not checked10.1016/j.msea.2021.140924_bib38
no DOI — not checkedAn introduction to metallurgy
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1016/j.msea.2021.140924"><img src="https://citestamp.com/citestamped/10.1016/j.msea.2021.140924/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1016/j.msea.2021.140924)