Reference health
Evolution of strength properties and defect sub-structure of the hypoeutectic A319.0 alloy irradiated by a pulsed electron beam and fractured under tensile stress
35/35 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
5 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 35 checked references that resolve
resolves10.1016/j.surfin.2021.101238
Influence of materials and fabrication strategies in tailoring the anticorrosive property of superhydrophobic coatings
resolves10.1016/j.surfcoat.2021.127665
Influence of MoSi2 on the microstructure and elevated-temperature wear properties of Inconel 718 coating fabricated by laser cladding
resolves10.1179/1743280413Y.0000000027
Application of cast Al–Si alloys in internal combustion engine components
resolves10.1016/j.nimb.2021.02.011
The features of the structural state and phase composition of the surface layer of aluminum alloy Al-Mg-Cu-Zn-Zr irradiated by the high current electron beam
resolves10.1016/j.mseb.2020.114874
Surface pre-treatment of aluminum alloys for the deposition of composite materials
resolves10.1016/j.surfcoat.2021.126911
Microstructure and properties of CoCrFeNiMo0.2 high-entropy alloy enhanced by high-current pulsed electron beam
resolves10.1016/j.jallcom.2019.02.130
Surface microstructure and property modifications in a Mg-8Gd-3Y-0.5Zr magnesium alloy treated by high current pulsed electron beam
resolves10.1016/j.surfcoat.2021.127351
Surface properties modification of magnesium alloys by low energy high current pulsed electron beam
resolves10.1016/j.surfcoat.2014.09.065
Microstructure modifications and associated hardness and corrosion improvements in the AISI 420 martensitic stainless steel treated by high current pulsed electron beam (HCPEB)
resolves10.1016/j.actamat.2006.05.053
Mechanisms of nanostructure and metastable phase formations in the surface melted layers of a HCPEB-treated D2 steel
resolves10.1016/j.surfcoat.2020.125530
Surface modifications of a hyperperitectic Zn-10 wt% Cu alloy by pulsed electron beam treatment
resolves10.15407/ufm.19.02.195
Modification of Structure and Surface Properties of Hypoeutectic Silumin by Intense Pulse Electron Beams
resolves10.1016/j.matlet.2020.128105
Changes in surface structure and mechanical characteristics of Al–5 wt%Si alloy after irradiation by electron beam
resolves10.1016/j.matlet.2018.11.054
Shock wave induced nanocrystallization during the high current pulsed electron beam process and its effect on mechanical properties
resolves10.1016/j.jallcom.2018.03.343
Effect of beam current on microstructure, phase, grain characteristic and mechanical properties of Ti-47Al-2Cr-2Nb alloy fabricated by selective electron beam melting
resolves10.1016/j.jallcom.2017.12.227
Effect of the high current pulsed electron beam treatment on the surface microstructure and corrosion resistance of a Mg-4Sm alloy
resolves10.1016/j.jma.2020.02.019
Microstructure and property modifications in surface layers of a Mg-4Sm-2Al-0.5Mn alloy induced by pulsed electron beam treatments
resolves10.1016/j.procir.2020.03.148
Effects of Pseudo-spark Discharge Pulsed Electron Beam Irradiation on the Microstructure and Properties of 6061 Aluminum Alloy
resolves10.1016/j.nimb.2011.04.010
Improved wear resistance of Al–15Si alloy with a high current pulsed electron beam treatment
resolves10.1016/j.phpro.2011.06.079
Study on continuous solid solution of Al and Si elements of a high current pulsed electron beam treated hypereutectic Al17.5Si alloy
resolves10.1016/j.surfcoat.2006.02.008
Improved pitting corrosion resistance of AISI 316L stainless steel treated by high current pulsed electron beam
resolves10.1016/j.nimb.2017.11.028
Surface alloying of aluminum with molybdenum by high-current pulsed electron beam
resolves10.1016/j.jallcom.2017.06.189
Enhanced corrosion property of W-Al coatings fabricated on aluminum using surface alloying under high-current pulsed electron beam
resolves10.1016/j.nimb.2016.03.035
Producing nano-grained and Al-enriched surface microstructure on AZ91 magnesium alloy by high current pulsed electron beam treatment
resolves10.1016/j.apsusc.2014.03.004
Surface composite nanostructures of AZ91 magnesium alloy induced by high current pulsed electron beam treatment
resolves10.1016/j.nimb.2017.05.002
Surface nanostructure and improved microhardness of 40CrNiMo7 steel induced by high current pulsed electron beam treatment
resolves10.1016/j.jallcom.2019.04.037
Strontium-modification in the stepwise solidification of A319 Al alloy: An in-situ neutron diffraction study
resolves10.1016/j.matpr.2017.10.148
Effect of initial microstructure on induction heating of A319 aluminium alloy
resolves10.1016/j.jmatprotec.2020.116789
Investigation of the efficacy of a water-cooled chill on enhancing heat transfer at the casting-chill interface in a sand-cast A319 engine block
resolves10.1016/j.matchar.2013.11.006
Replication of engine block cylinder bridge microstructure and mechanical properties with lab scale 319 Al alloy billet castings
resolves10.4324/9781003045960-1
Analysis of modern methods of surface modification of light metals using external energy sources
resolves10.4028/www.scientific.net/KEM.685.715
Regularities of Structure and Phase Composition Formation of Surface Layer of Silumin Subjected to Electron-Beam Treatment
resolves10.1016/j.apsusc.2019.143767
Effect of electron-plasma alloying on structure and mechanical properties of Al-Si alloy
resolves10.1016/B978-0-08-100040-3.00002-X
Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) for materials characterization
resolves10.1016/S0029-1021(68)80015-5
The 5 references without a DOI — listed, not checked
no DOI — not checkedCoatability of diamond-like carbon on 316L stainless steel printed by binder jetting
no DOI — not checkedOxime-modified aluminum (III) isopropoxide: A promising sol-gel precursor coating to improve mechanical strength of an aluminum alloy, Mater
no DOI — not checkedProperties evaluation of A356 and A319 Aluminum alloys under different casting conditions, Mater
no DOI — not checkedK. Anderson, J. Weritz, J.G. Kaufman, eds., 319.0, A319.0, B319.0, and 320.0[1]: Al-Si-Cu General Purpose Foundry Alloys, Prop. Sel. Alum. Alloy. 2B (2019) 0. https://doi.org/ 10.31399/asm.hb.v02b.a0006562.
no DOI — not checked10.1016/j.mtla.2021.101223_bib0035
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1016/j.mtla.2021.101223"><img src="https://citestamp.com/citestamped/10.1016/j.mtla.2021.101223/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1016/j.mtla.2021.101223)