Reference health
Numerical study of elbow corrosion in the presence of sodium chloride, calcium chloride, naphthenic acids, and sulfur in crude oil
71/71 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
15 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 71 checked references that resolve
resolves10.1016/S0920-4105(00)00024-3
Experimental and numerical modeling of sulfur plugging in carbonate reservoirs
resolves10.1016/0040-6031(85)85227-8
On the use of the arrhenius equation to describe cellulose and wood pyrolysis
resolves10.1016/j.asej.2012.04.003
Computational fluid dynamics (CFD) prediction of mass fraction profiles of gas oil and gasoline in fluid catalytic cracking (FCC) riser
resolves10.1088/1742-6596/1378/2/022089
An Overview of Ammonium Chloride (NH<sub>4</sub>Cl) Corrosion in the Refining Unit
resolves10.1016/j.engfailanal.2011.03.019
An overview of naphthenic acid corrosion in a vacuum distillation plant
resolves10.1016/j.cherd.2010.10.018
CFD analysis of hydrodynamic, heat transfer and reaction of three phase riser reactor
resolves10.1016/j.fuel.2018.03.077
A comprehensive investigation of refinery preheaters foulant samples originated by heavy crude oil fractions as heating fluids
resolves10.1016/j.scitotenv.2020.139293
Is the Arrhenius-correction of biodegradation rates, as recommended through REACH guidance, fit for environmentally relevant conditions? An example from petroleum biodegradation in environmental systems
resolves10.1016/j.apt.2019.07.010
Investigation on flow characteristics of ice slurry in horizontal 90° elbow pipe by a CFD-PBM coupled model
resolves10.1016/j.fuproc.2014.09.037
Reaction mechanism and kinetic modeling of hydroisomerization and hydroaromatization of fluid catalytic cracking naphtha
resolves10.3311/PPme.12348
The Effect of Rheology Model of an Activated Sludge on to the Predicted Losses by an Elbow
resolves10.1016/j.corsci.2014.04.044
Application of corrosion inhibitors for steels in acidic media for the oil and gas industry: A review
resolves10.1016/j.jiec.2018.05.020
Recent advances and prospects in polymeric nanofluids application for enhanced oil recovery
resolves10.1016/j.petrol.2017.10.034
A general model for predicting apparent viscosity of crude oil or emulsion in laminar pipeline at high pressures
resolves10.1016/j.petrol.2019.106266
Ion type adjustment with emphasize on the presence of NaCl existence; measuring interfacial tension, wettability and spreading of crude oil in the carbonate reservoir
resolves10.1016/j.cherd.2017.08.006
Hydrodynamic performance evaluation of a novel eductor liquid–liquid extractor using CFD modeling
resolves10.1016/j.petrol.2017.05.028
Viscosity reduction for flowability enhancement in Iraqi crude oil pipelines using novel capacitor and locally prepared nanosilica
resolves10.1016/j.ijheatmasstransfer.2019.03.076
Mass transfer measurements and flow separation behavior in a 90° short elbow
resolves10.1016/j.cherd.2013.12.012
Modeling of naphtha reforming unit applying detailed description of kinetic in continuous catalytic regeneration process
resolves10.1016/j.corsci.2016.11.021
Mechanism of magnetite formation in high temperature naphthenic acid corrosion by crude oil fractions
resolves10.1016/j.petrol.2006.06.004
Optimal determination of rheological parameters for Herschel–Bulkley drilling fluids and impact on pressure drop, velocity profiles and penetration rates during drilling
resolves10.1016/j.csefa.2017.08.001
Analysis of a failed pipe elbow in geothermal production facility
resolves10.1016/j.fuel.2004.02.004
Naphthenic acids, total acid number and sulfur content profile characterization in Isthmus and Maya crude oils
resolves10.1074/jbc.M110.184176
Histidine 103 in Fra2 Is an Iron-Sulfur Cluster Ligand in the [2Fe-2S] Fra2-Grx3 Complex and Is Required for in Vivo Iron Signaling in Yeast
resolves10.1016/j.petrol.2018.03.067
Numerical study of water displacement from the elbow of an inclined oil pipeline
resolves10.1016/j.chemolab.2014.10.001
Multiplicative algorithm for discriminating between Arrhenius and non-Arrhenius behaviour
resolves10.1016/j.engfailanal.2014.01.017
Corrosion in water supply pipe stainless steel 304 and a supply line of helium in stainless steel 316
resolves10.1016/j.ijheatmasstransfer.2020.119568
A new theory for modeling transport and deposition of solid particles in oil and gas wells and pipelines
resolves10.1016/j.ijft.2020.100032
Comparison of Characteristic Particle Velocities in Solid-Liquid Multiphase Flow in Elbow
resolves10.1016/j.flowmeasinst.2013.04.006
Determination of friction factor of Algerian crude oil during flow in pipe-lines
resolves10.1016/j.fuel.2011.10.007
Investigating the rheological properties of light crude oil and the characteristics of its emulsions in order to improve pipeline flow
resolves10.1016/j.petrol.2017.08.073
The effect of crude oil in the pipeline corrosion by the naphthenic acid and the sulfur: A numerical approach
resolves10.1016/j.fuel.2017.01.060
Process optimization and kinetic modeling of biodiesel production using non-edible Madhuca indica oil
resolves10.1016/j.cherd.2010.11.017
CFD analysis of inlet chamber body profile effects on de-oiling hydrocyclone efficiency
resolves10.1016/j.tifs.2006.05.004
Computational fluid dynamics (CFD) – an effective and efficient design and analysis tool for the food industry: A review
resolves10.1016/j.fuel.2017.07.092
Modeling, simulation and kinetic parameter estimation for diesel hydrotreating
resolves10.1590/1980-5373-mr-2016-0954
Corrosion Behavior of API 5L X80 Steel in the Produced Water of Onshore Oil Recovery Facilities
resolves10.1016/j.powtec.2018.04.001
Numerical investigation of the maximum erosion zone in elbows for liquid-particle flow
resolves10.1016/j.apcata.2004.02.004
Kinetic modelling of the catalytic cracking of n-hexane and n-heptane over a zeolite catalyst
resolves10.1016/j.flowmeasinst.2020.101724
CFD analysis of the performance of elbow-meter with high concentration coal ash slurries
resolves10.1016/j.jece.2018.06.037
Kinetic modeling of catalytic esterification of non-edible macauba pulp oil using macroporous cation exchange resin
resolves10.1016/j.fuel.2018.03.087
8-Lump kinetic model for fluid catalytic cracking with olefin detailed distribution study
resolves10.1016/j.petrol.2017.06.061
Laminar pipeline flow of heavy oil–in–water emulsions produced by continuous in-line emulsification
resolves10.1016/j.fuel.2019.116597
4-Lump kinetic model of the co-pyrolysis of LDPE and a heavy petroleum fraction
resolves10.1016/j.jiec.2013.11.052
Kinetic modeling formulation of the methanol to olefin process: Parameter estimation
resolves10.1016/j.wear.2019.01.015
Experiments and CFD simulations of erosion of a 90° elbow in liquid-dominated liquid-solid and dispersed-bubble-solid flows
resolves10.1016/j.rser.2019.109394
Biodiesel production from waste cotton-seed cooking oil using microwave-assisted transesterification: Optimization and kinetic modeling
resolves10.1016/j.petrol.2018.02.070
High-precision diameter detector and three-dimensional reconstruction method for oil and gas pipelines
resolves10.1016/j.ces.2010.06.015
Interfacial friction factor determination using CFD simulations in a horizontal stratified two-phase flow
resolves10.1016/j.icheatmasstransfer.2017.11.006
Mass and momentum transfer characteristics in 90° elbow under high Reynolds number
resolves10.4314/njt.v35i2.11
PIPELINE CORROSION CONTROL IN OIL AND GAS INDUSTRY: A CASE STUDY OF NNPC/PPMC SYSTEM 2A PIPELINE
resolves10.1016/j.ces.2020.115537
Evaluation of drift-velocity closure relationships for highly viscous liquid-air slug flow in horizontal pipes through 3D CFD modelling
resolves10.1016/j.engfailanal.2016.09.009
Corrosion investigation of stainless steel water pump components
resolves10.1016/j.powtec.2016.12.083
Numerical investigation of the erosion behavior in elbows of petroleum pipelines
resolves10.1016/S0010-938X(03)00192-6
Resistance of Mo-bearing stainless steels and Mo-bearing stainless-steel coating to naphthenic acid corrosion and erosion–corrosion
resolves10.1016/j.conbuildmat.2010.07.023
Influence of CaCl2 and NaCl from different sources on chloride threshold value for the corrosion of steel reinforcement in concrete
resolves10.1016/j.tust.2017.08.011
Numerical investigation of pipeline transport characteristics of slurry shield under gravel stratum
resolves10.1016/j.fuel.2004.08.003
Influence of different sulfur compounds on corrosion due to naphthenic acid
resolves10.1016/j.desal.2013.05.022
CFD modeling and simulation of concentration polarization in microfiltration of oil–water emulsions; Application of an Eulerian multiphase model
resolves10.1016/j.jaap.2016.12.025
Upgrading of crude oil in supercritical water: A five-lumped kinetic model
resolves10.1016/j.petlm.2017.12.008
Numerical simulation for erosion effects of three-phase flow containing sulfur particles on elbows in high sour gas fields
resolves10.1016/j.apor.2019.101936
Numerical analysis of the impact forces exerted by submarine landslides on pipelines
resolves10.1016/j.petrol.2019.106518
Representation of a new physics-based non-Darcy equation for low-velocity flow in tight reservoirs
The 15 references without a DOI — listed, not checked
no DOI — not checkedCorrosion and its control in crude oil refining process
no DOI — not checkedCorrosion in the petrochemical industry
no DOI — not checked10.1016/j.petrol.2020.108124_bib15
no DOI — not checked10.1016/j.petrol.2020.108124_bib17
no DOI — not checkedA comparative study on determination of the equilibrium, kinetic and thermodynamic parameters of biosorption of copper(II) and lead(II) ions onto pretreated Aspergillus Niger Biochemical Engineering
no DOI — not checked10.1016/j.petrol.2020.108124_bib25
no DOI — not checkedMitigation of corrosion problems in api 5L steel pipeline A review
no DOI — not checkedCalcium carbonate scaling kinetics in oilfield gathering pipelines by using a1D axial dispersion model
no DOI — not checked10.1016/j.petrol.2020.108124_bib47
no DOI — not checkedKinetic modeling of lignin catalytic hydroconversion in a semi-batch reactor
no DOI — not checked10.1016/j.petrol.2020.108124_bib57
no DOI — not checkedConcentrated brines of siberian platform and their counterparts in asia, europe, africa and America
no DOI — not checkedNewtonian and non-Newtonian fluids: velocity profiles, viscosity data, and laminar flow friction factor equations for flow in a circular duct
no DOI — not checked10.1016/j.petrol.2020.108124_bib77
no DOI — not checkedNumerical simulation of the erosion of pipe bends considering fluid-induced stress and surface scar evolution
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1016/j.petrol.2020.108124"><img src="https://citestamp.com/citestamped/10.1016/j.petrol.2020.108124/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1016/j.petrol.2020.108124)