Reference health
A novel POSS-containing polyimide: Synthesis and its composite coating with graphene-like MoS2 for outstanding tribological performance
42/42 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
1 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 42 checked references that resolve
resolves10.1002/adem.201900683
Lubrication Characteristics of Epoxy Resin‐Based Monolithic Thin Films with a Well‐Defined Porous Morphology
resolves10.1016/j.surfcoat.2013.08.032
Investigation of surface properties and mechanical and tribological behaviors of polyimide based composite coatings
resolves10.1016/j.compositesb.2019.02.005
Enhanced mechanical and tribological properties of graphene/bismaleimide composites by using reduced graphene oxide with non-covalent functionalization
resolves10.1016/j.triboint.2018.10.013
High mechanical and tribological performance polyimide nanocomposites using amine-functionalized graphene nanosheets
resolves10.1016/j.surfcoat.2019.01.013
Electrical and mechanical properties of polyimide composite films reinforced by ultralong titanate nanotubes
resolves10.1002/app.47399
Wear, thermal, and physical properties of fluorine‐containing polyimide/silica hybrid nanocomposite coatings
resolves10.1016/j.compositesa.2015.11.029
Tribological properties of fluorinated graphene reinforced polyimide composite coatings under different lubricated conditions
resolves10.1016/j.solidstatesciences.2018.04.002
Novel polyester/SiO 2 nanocomposite membranes: Synthesis, properties and morphological studies
resolves10.1016/S0142-9418(03)00024-2
Investigation of tribological properties of Al2O3-polyimide nanocomposites
resolves10.1016/j.matdes.2010.07.013
The tribological behavior of nanometer and micrometer TiO2 particle-filled polytetrafluoroethylene/polyimide
resolves10.1016/j.compositesb.2013.08.064
Mechanical, electrical and thermal properties of aligned carbon nanotube/polyimide composites
resolves10.1007/s11051-014-2386-2
Rheological and tribological behaviour of lubricating oils containing platelet MoS2 nanoparticles
resolves10.1023/B:TRIL.0000044490.03462.6e
Tribology of Co-sputtered Nanocomposite Au/MoS2 Solid Lubricant Films over a Wide Contact Stress Range
resolves10.1016/j.surfcoat.2018.08.084
Deposition of metal coatings containing fullerene-like MoS2 nanoparticles with reduced friction and wear
resolves10.1002/admi.201900915
MoS<sub>2</sub>/Graphene Composites as Promising Materials for Energy Storage and Conversion Applications
resolves10.1016/j.compositesa.2017.06.008
Ternary hybrid nanoparticles of reduced graphene oxide/graphene-like MoS2/zirconia as lubricant additives for bismaleimide composites with improved mechanical and tribological properties
resolves10.1016/j.compscitech.2016.01.020
Nanosheets of MoS2 and reduced graphene oxide as hybrid fillers improved the mechanical and tribological properties of bismaleimide composites
resolves10.1088/0957-4484/24/12/125601
New ‘chimie douce’ approach to the synthesis of hybrid nanosheets of MoS<sub>2</sub>on CNT and their anti-friction and anti-wear properties
resolves10.1016/j.surfcoat.2017.02.056
Hybrid organic/inorganic nanolaminate structures with enhanced tribo-mechanical properties for optical applications
resolves10.1016/S0169-4332(03)00865-1
Preparation and characterization of hydrophobic organic–inorganic composite thin films of PMMA/SiO2/TiO2 with low friction coefficient
resolves10.1021/cr900201r
Recent Developments in the Chemistry of Cubic Polyhedral Oligosilsesquioxanes
resolves10.3390/nano2040445
Polyhedral Oligomeric Silsesquioxane (POSS)-Containing Polymer Nanocomposites
resolves10.1016/S0032-3861(03)00434-8
Polyimide/POSS nanocomposites: interfacial interaction, thermal properties and mechanical properties
resolves10.1007/s10853-011-6078-3
High performance hybrids based on a novel incompletely condensed polyhedral oligomeric silsesquioxane and bismaleimide resin with improved thermal and dielectric properties
resolves10.1021/ma034743r
Synthesis and Dielectric Properties of Polyimide-Tethered Polyhedral Oligomeric Silsesquioxane (POSS) Nanocomposites via POSS-diamine
resolves10.1007/s10853-018-2475-1
Marvelous abilities for polyhedral oligomeric silsesquioxane to improve tribological properties of polyamide-imide/polytetrafluoroethylene coatings
resolves10.1021/am504342j
Effect of Octa(aminophenyl) Polyhedral Oligomeric Silsesquioxane Functionalized Graphene Oxide on the Mechanical and Dielectric Properties of Polyimide Composites
resolves10.1016/j.compositesb.2017.11.052
Morphology and thermomechanical properties of natural rubber vulcanizates containing octavinyl polyhedral oligomeric silsesquioxane
resolves10.1016/j.apsusc.2018.03.219
Effect of carbon nanotubes and octa-aminopropyl polyhedral oligomeric silsesquioxane on the surface behaviors of carbon fibers and mechanical performance of composites
resolves10.1039/C6RA01053A
Effect of functionalized graphene oxide with hyperbranched POSS polymer on mechanical and dielectric properties of cyanate ester composites
resolves10.1039/c3tc30856a
Improved dispersant-free liquid exfoliation down to the graphene-like state of solvent-free mechanochemically delaminated bulk MoS2
resolves10.1039/C5RA19101G
Improved mechanical and tribological properties of bismaleimide composites by surface-functionalized reduced graphene oxide and MoS
<sub>2</sub>
coated with cyclotriphosphazene polymer
resolves10.1021/ma900969b
Preparation, Characterization, and Properties of Novel PSMA−POSS Systems by Reactive Blending
resolves10.1016/j.polymdegradstab.2011.07.018
Novel hybrid systems based on poly(propylene-g-maleic anhydride) and Ti-POSS by direct reactive blending
resolves10.1039/C5TC03391H
Hyperbranched polysiloxane (HBPSi)-based polyimide films with ultralow dielectric permittivity, desirable mechanical and thermal properties
resolves10.1002/pc.24963
Fabrication of Polydopamine‐Modified Carbon Fabric/Polyimide Composites With Enhanced Mechanical and Tribological Properties
resolves10.1016/j.triboint.2015.06.004
Friction and wear behaviors of carbon and aramid fibers reinforced polyimide composites in simulated space environment
resolves10.1016/j.matdes.2010.03.017
Study on the synergistic effect of carbon fiber and graphite and nanoparticle on the friction and wear behavior of polyimide composites
The 1 reference without a DOI — listed, not checked
no DOI — not checkedComparative study of tribological properties of carbon fibers and aramid particles reinforced polyimide composites under dry and sea water lubricated conditions
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1016/j.porgcoat.2020.106013"><img src="https://citestamp.com/citestamped/10.1016/j.porgcoat.2020.106013/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1016/j.porgcoat.2020.106013)