Reference health
Alloy phase transformations driven by high temperature corrosion processes
00065-8/badge.svg){kind=icon}
31/31 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
11 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 31 checked references that resolve
resolves10.1023/A:1018874206733
The Long-Term, Cyclic-Oxidation Behavior of Selected Chromia-Forming Alloys
resolves10.5006/1.3584919
A Finite Difference Model Describing Carburization in High-Temperature Alloys
resolves10.5006/0010-9312-21.12.382
Kinetics, Microstructures and Mechanism of Internal Oxidation - Its Effect and Prevention in High Temperature Alloy Oxidation
resolves10.1361/105996300770350159
Long-Term Cyclic Oxidation Behavior of Uncoated and Coated RE108 and IN939 at 980 and 870 °C
resolves10.5006/1.3583045
Oxidation of Some Advanced Single-Crystal Nickel-Base Superalloys in Air at 2000 F (1093 C)
resolves10.1023/A:1018880019395
Factors Affecting Chromium Carbide Precipitate Dissolution During Alloy Oxidation
resolves10.1007/BF00664423
Mixed-oxidant attack of high-temperature alloys in carbon- and oxygen-containing environments
resolves10.1002/(SICI)1521-4176(199812)49:12<855::AID-MACO855>3.0.CO;2-5
Silicon contamination effects in the oxidation of carbide-containing cobalt-chromium alloys
resolves10.1007/s11661-999-0324-1
Simultaneous oxidation and sigma-phase formation in a stainless steel
resolves10.1007/s11837-000-0109-x
Alloy design strategies for promoting protective oxide-scale formation
resolves10.1016/S1359-6454(99)00169-X
Formation of Z-Ti50Al30O20 in the sub-oxide zones of γ-TiAl-based alloys during oxidation at 1000°C
resolves10.1016/0956-716X(95)00155-O
The significance of sub-surface depletion layer composition for the oxidation behaviour of γ-titanium aluminides
resolves10.1002/maco.19970480105
Development and microstructure of the Al‐depleted layer of oxidized TiAl
resolves10.1023/A:1004694111032
The Formation of Protective Alumina-Based Scales During High-Temperature Air Oxidation of γ -TiAl Alloys
resolves10.1016/0010-938X(93)90310-D
Cyclic oxidation behaviour of two-phase NiCrAl alloys at 1100°C
resolves10.1016/S0010-938X(96)00149-7
The cyclic oxidation behaviour of α-Cr + β-NiAl alloys with and without trace Zr addition
resolves10.1023/A:1018804824847
Beneficial Effects of Rhenium Additions on the Cyclic-Oxidation Resistance of β-NiAl + α-Cr Alloys
resolves10.1016/S1359-6454(96)00054-7
Calculation of precipitate dissolution zone kinetics in oxidising binary two-phase alloys
resolves10.1002/maco.19870380910
The development of silicon‐containing oxides during the oxidation of iron‐chromium‐base alloys
resolves10.1016/S0010-938X(69)80097-1
The identification of thin healing layers at the base of oxide scales on FeCr base alloys
resolves10.1007/BF00611695
Modification of the oxidation behavior of high-purity austenitic Fe-14Cr-14Ni by the addition of silicon
resolves10.1007/BF00656580
Analytical electron microscopy of a selective oxide scale formed on 20% Cr-25% Ni-Nb stainless steel
The 11 references without a DOI — listed, not checked
no DOI — not checkedM.A. Harper, J.E. Barnes, G.Y. Lai, Corrosion'97, National Association of Corrosion Engineers, Houston, TX, 1997, paper 132
no DOI — not checkedR.C. John, Corrosion'96, National Association of Corrosion Engineers, Houston, TX, 1996, paper 171
no DOI — not checked10.1016/S0010-938X(01)00065-8_BIB4
no DOI — not checkedJ.L. Meijering, in: H. Herman (Ed.), Advances in Materials Research, vol. 5, Wiley–Interscience, New York, 1971, pp. 1–81
no DOI — not checkedJ.H. Swisher, Oxidation of Metals and Alloys, American Society for Metals, Metals Park, OH, 1971, pp. 235–267
no DOI — not checkedB. Gleeson, in: M. Schütze (Ed.), Corrosion and environmental degradation of materials, in: R.W. Cahn, P. Haasen, E.J. Kramer (Series Eds.), Materials Science and Technology, vol. 19, Part II, Wiley–VCH, Germany, 2000, pp.173–228
no DOI — not checked10.1016/S0010-938X(01)00065-8_BIB14
no DOI — not checkedM.P. Brady, B.A. Pint, P.F. Tortorelli, I.G. Wright, R.J. Hanrahan, in: M. Schütze (Ed.), Corrosion and Environmental Degradation of Materials, in: R.W. Cahn, P. Haasen, E.J. Kramer (Series Eds.), Materials Science and Technology, vol. 19, Part II, Wiley–VCH, Germany, 2000, pp. 229–325
no DOI — not checkedE.H. Copland, The thermodynamics and kinetics of interfacial reactions in the Ti–Al–O system, Ph.D. Thesis, University of New South Wales, Australia, 1999
no DOI — not checked10.1016/S0010-938X(01)00065-8_BIB36
no DOI — not checked10.1016/S0010-938X(01)00065-8_BIB42
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1016/s0010-938x(01)00065-8"><img src="https://citestamp.com/citestamped/10.1016/s0010-938x(01)00065-8/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[00065-8/badge.svg)](https://citestamp.com/citestamped/10.1016/s0010-938x(01)00065-8)