Reference health
Aqueous Soluble Fullerene Acceptors for Efficient Eco-Friendly Polymer Solar Cells Processed from Benign Ethanol/Water Mixtures
76/76 checkable references clean · checked 2026-07-24
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
1 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 76 checked references that resolve
resolves10.1002/adma.201500647
Single‐Junction Organic Solar Cells Based on a Novel Wide‐Bandgap Polymer with Efficiency of 9.7%
resolves10.1002/adma.201501132
Small‐Bandgap Polymer Solar Cells with Unprecedented Short‐Circuit Current Density and High Fill Factor
resolves10.1021/acs.accounts.6b00347
From Fullerene–Polymer to All-Polymer Solar Cells: The Importance of Molecular Packing, Orientation, and Morphology Control
resolves10.1039/C4TA02426E
Design of terpolymers as electron donors for highly efficient polymer solar cells
resolves10.1002/adfm.201301509
Solubility Based Identification of Green Solvents for Small Molecule Organic Solar Cells
resolves10.1039/c3ee41915k
Non-halogenated solvents for environmentally friendly processing of high-performance bulk-heterojunction polymer solar cells
resolves10.1039/C8TA00479J
Green-solvent processable semiconducting polymers applicable in additive-free perovskite and polymer solar cells: molecular weights, photovoltaic performance, and thermal stability
resolves10.1021/am500836u
Efficient Polymer Solar Cells Based on Poly(3-hexylthiophene) and Indene–C<sub>60</sub> Bisadduct Fabricated with Non-halogenated Solvents
resolves10.1039/C4EE02362E
Low bandgap conjugated polymers based on mono-fluorinated isoindigo for efficient bulk heterojunction polymer solar cells processed with non-chlorinated solvents
resolves10.1002/aenm.201501991
Green‐Solvent‐Processed All‐Polymer Solar Cells Containing a Perylene Diimide‐Based Acceptor with an Efficiency over 6.5%
resolves10.1021/acs.nanolett.5b01185
Water Processable Polythiophene Nanowires by Photo-Cross-Linking and Click-Functionalization
resolves10.1002/adma.201405226
High‐Performance All‐Polymer Solar Cells Via Side‐Chain Engineering of the Polymer Acceptor: The Importance of the Polymer Packing Structure and the Nanoscale Blend Morphology
resolves10.1021/ja305875u
Polymer-Fullerene Miscibility: A Metric for Screening New Materials for High-Performance Organic Solar Cells
resolves10.1039/C7PY00194K
Synthesis and side-chain isomeric effect of 4,9-/5,10-dialkylated-β-angular-shaped naphthodithiophenes-based donor–acceptor copolymers for polymer solar cells and field-effect transistors
resolves10.1002/adfm.201504191
Side Chain Optimization of Naphthalenediimide–Bithiophene‐Based Polymers to Enhance the Electron Mobility and the Performance in All‐Polymer Solar Cells
resolves10.1021/acsami.7b12612
Haptacyclic Carbazole-Based Ladder-Type Nonfullerene Acceptor with Side-Chain Optimization for Efficient Organic Photovoltaics
resolves10.1021/acs.macromol.7b01986
Fine-Tuning LUMO Energy Levels of Conjugated Polymers Containing a B←N Unit
resolves10.1039/C6TA10978K
Synthesis and side-chain engineering of phenylnaphthalenediimide (PNDI)-based n-type polymers for efficient all-polymer solar cells
resolves10.1021/acs.macromol.7b00386
Polymer Electron Acceptors with Conjugated Side Chains for Improved Photovoltaic Performance
resolves10.1039/c3ta13266h
Influence of intermolecular interactions of electron donating small molecules on their molecular packing and performance in organic electronic devices
resolves10.1007/s11426-014-5260-2
Side-chain engineering of high-efficiency conjugated polymer photovoltaic materials
resolves10.1002/adfm.201401948
Optimization of Solubility, Film Morphology and Photodetector Performance by Molecular Side‐Chain Engineering of Low‐Bandgap Thienothiadiazole‐Based Polymers
resolves10.1021/la050599m
Photovoltaic Cells Based on Sequentially Adsorbed Multilayers of Conjugated Poly(<i>p</i>-phenylene ethynylene)s and a Water-Soluble Fullerene Derivative
resolves10.1016/j.solmat.2011.09.023
“Green” polymer solar cell based on water-soluble poly [3-(potassium-6-hexanoate) thiophene-2, 5-diyl] and aqueous-dispersible noncovalent functionalized graphene sheets
resolves10.1063/1.2711707
Organic solar cells from water-soluble poly(thiophene)/fullerene heterojunction
resolves10.1002/aenm.201000007
Fabrication of Polymer Solar Cells Using Aqueous Processing for All Layers Including the Metal Back Electrode
resolves10.1021/acs.macromol.7b00452
Ethanol-Processable, Highly Crystalline Conjugated Polymers for Eco-Friendly Fabrication of Organic Transistors and Solar Cells
resolves10.1021/am201075y
Controlling Number of Indene Solubilizing Groups in Multiadduct Fullerenes for Tuning Optoelectronic Properties and Open-Circuit Voltage in Organic Solar Cells
resolves10.1002/aenm.201200474
Recombination in Polymer:Fullerene Solar Cells with Open‐Circuit Voltages Approaching and Exceeding 1.0 V
resolves10.1021/ja908602j
Indene−C<sub>60</sub>Bisadduct: A New Acceptor for High-Performance Polymer Solar Cells
resolves10.1002/adfm.201001807
A Simple and Effective Modification of PCBM for Use as an Electron Acceptor in Efficient Bulk Heterojunction Solar Cells
resolves10.1021/nn900798m
Distorted Asymmetric Cubic Nanostructure of Soluble Fullerene Crystals in Efficient Polymer:Fullerene Solar Cells
resolves10.1039/C2PY20651J
Side-chain substitution of poly(3-hexylthiophene) (P3HT) by PCBM via postpolymerization: an intramolecular hybrid of donor and acceptor
resolves10.1021/nn4001963
Noncovalent Functionalization of Graphene Attaching [6,6]-Phenyl-C61-butyric Acid Methyl Ester (PCBM) and Application as Electron Extraction Layer of Polymer Solar Cells
resolves10.1016/j.eurpolymj.2011.06.014
Synthesis and characterization of water-soluble poly(p-phenylene vinylene) derivatives via the dithiocarbamate precursor route
resolves10.1142/S1088424608000145
Supramolecular functionalization of single-walled carbon nanotubes with uncharged water-soluble porphyrins
resolves10.1016/j.orgel.2013.05.017
Design and synthesis of soluble dibenzosuberane-substituted fullerene derivatives for bulk-heterojunction polymer solar cells
resolves10.1039/B406613H
Synthesis and characterization of thienylene–phenylene copolymers with oligo(ethylene oxide) side chains
resolves10.1039/c4tc00720d
Bodipy dyes bearing oligo(ethylene glycol) groups on the meso-phenyl ring: tuneable solid-state photoluminescence and highly efficient OLEDs
resolves10.1021/acs.macromol.6b01414
Controlling Energy Levels and Blend Morphology for All-Polymer Solar Cells via Fluorination of a Naphthalene Diimide-Based Copolymer Acceptor
resolves10.1002/adma.201104509
Tuning the Energy Level Offset between Donor and Acceptor with Ferroelectric Dipole Layers for Increased Efficiency in Bilayer Organic Photovoltaic Cells
resolves10.1002/adfm.201701256
The Impact of Sequential Fluorination of π‐Conjugated Polymers on Charge Generation in All‐Polymer Solar Cells
resolves10.1103/PhysRevB.82.245207
Recombination in polymer-fullerene bulk heterojunction solar cells
resolves10.1002/adma.201602298
Side‐Chain Fluorination: An Effective Approach to Achieving High‐Performance All‐Polymer Solar Cells with Efficiency Exceeding 7%
resolves10.1021/ja5092613
Efficient Organic Solar Cells with Helical Perylene Diimide Electron Acceptors
resolves10.1039/C3EE42484G
Charge generation and transport in efficient organic bulk heterojunction solar cells with a perylene acceptor
resolves10.1021/acsami.5b08531
Charge Generation Dynamics in Efficient All-Polymer Solar Cells: Influence of Polymer Packing and Morphology
resolves10.1002/adfm.201301820
Photovoltaic Function and Exciton/Charge Transfer Dynamics in a Highly Efficient Semiconducting Copolymer
resolves10.1039/c003394d
Influence of nanoscale phase separation on geminate versus bimolecular recombination in P3HT:fullerene blend films
resolves10.1021/jp909442s
Transient Absorption Studies of Bimolecular Recombination Dynamics in Polythiophene/Fullerene Blend Films
resolves10.1039/C5TA09545J
Interface-induced crystallization and nanostructure formation of [6,6]-phenyl-C
<sub>61</sub>
-butyric acid methyl ester (PCBM) in polymer blend films and its application in photovoltaics
resolves10.1021/ja806493n
The Influence of Poly(3-hexylthiophene) Regioregularity on Fullerene-Composite Solar Cell Performance
resolves10.1002/adfm.200900043
Photocrosslinkable Polythiophenes for Efficient, Thermally Stable, Organic Photovoltaics
resolves10.1002/adfm.201000975
Effects of Thermal Annealing Upon the Morphology of Polymer–Fullerene Blends
resolves10.1039/C4EE01529K
Semi-crystalline photovoltaic polymers with efficiency exceeding 9% in a ∼300 nm thick conventional single-cell device
resolves10.1038/nphoton.2009.192
Polymer solar cells with enhanced open-circuit voltage and efficiency
resolves10.1021/acs.macromol.6b01069
Correlation between Phase-Separated Domain Sizes of Active Layer and Photovoltaic Performances in All-Polymer Solar Cells
resolves10.1038/nphoton.2014.55
The influence of molecular orientation on organic bulk heterojunction solar cells
resolves10.1002/aenm.201100726
Multi‐Length‐Scale Morphologies in PCPDTBT/PCBM Bulk‐Heterojunction Solar Cells
resolves10.1002/aenm.201500877
Significance of Average Domain Purity and Mixed Domains on the Photovoltaic Performance of High‐Efficiency Solution‐Processed Small‐Molecule BHJ Solar Cells
resolves10.1002/aenm.201200912
Domain Purity, Miscibility, and Molecular Orientation at Donor/Acceptor Interfaces in High Performance Organic Solar Cells: Paths to Further Improvement
resolves10.1021/acs.chemmater.7b03495
Importance of 2D Conjugated Side Chains of Benzodithiophene-Based Polymers in Controlling Polymer Packing, Interfacial Ordering, and Composition Variations of All-Polymer Solar Cells
resolves10.1021/ja5123182
Determining the Role of Polymer Molecular Weight for High-Performance All-Polymer Solar Cells: Its Effect on Polymer Aggregation and Phase Separation
resolves10.1021/acs.macromol.7b00834
Comparative Study of Thermal Stability, Morphology, and Performance of All-Polymer, Fullerene–Polymer, and Ternary Blend Solar Cells Based on the Same Polymer Donor
resolves10.1038/ncomms6293
Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells
resolves10.1002/adma.201602776
Energy‐Level Modulation of Small‐Molecule Electron Acceptors to Achieve over 12% Efficiency in Polymer Solar Cells
resolves10.1002/adma.201702291
High Efficiency Nonfullerene Polymer Solar Cells with Thick Active Layer and Large Area
resolves10.1002/aenm.201700519
Thiophene Rings Improve the Device Performance of Conjugated Polymers in Polymer Solar Cells with Thick Active Layers
The 1 reference without a DOI — listed, not checked
no DOI — not checkedU.S. Environmental Protection Agency. Toxics Release
Inventory (TRI) Program; 1987–2018. http://www.epa.gov/toxics-release-inventory-tri-program/tri-listed-chemicals.
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-24 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1021/acs.chemmater.8b02086"><img src="https://citestamp.com/citestamped/10.1021/acs.chemmater.8b02086/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1021/acs.chemmater.8b02086)