Reference health

Surface Modification of Cured Inorganic Foams with Cationic Cellulose Nanocrystals and Their Use as Reactive Filter Media for Anionic Dye Removal

https://doi.org/10.1021/acsami.0c05927
CiteStamped reference-health badge
74/74 checkable references clean · checked 2026-07-26

Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.

1 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.

The 74 checked references that resolve
resolves10.1021/acs.chemmater.8b04081
A Universal Method for the Preparation of Dual Network Reduced Graphene Oxide–Ceramic/Metal Foam Materials with Tunable Porosity and Improved Conductivity
resolves10.1021/cm501475b
Ultrafast Syntheses of Silver Foams from Ag<sub>2</sub>NCN: Combustion Synthesis versus Chemical Reduction
resolves10.1021/acsami.9b20652
Hybrid Metallic Foam with Superior Elasticity, High Electrical Conductivity, and Pressure Sensitivity
resolves10.1002/adma.201601125
Freestanding, Hydrophilic Nitrogen‐Doped Carbon Foams for Highly Compressible All Solid‐State Supercapacitors
resolves10.1021/acs.chemmater.5b00505
Facile Preparation of Superelastic and Ultralow Dielectric Boron Nitride Nanosheet Aerogels via Freeze-Casting Process
resolves10.1246/bcsj.20180271
Blowing Route towards Advanced Inorganic Foams
resolves10.1017/CBO9781139878326.003
Introduction
resolves10.1002/anie.201700684
Low‐Density Open Cellular Sponges as Functional Materials
resolves10.1016/j.pmatsci.2019.100621
Geopolymer foams: An overview of recent advancements
resolves10.1016/j.cemconcomp.2018.02.009
Metal powders as foaming agents in fly ash based geopolymer synthesis and their impact on the structure depending on the Na /Al ratio
resolves10.1016/j.jhazmat.2016.07.059
Novel porous fly-ash containing geopolymer monoliths for lead adsorption from wastewaters
resolves10.1016/j.matlet.2016.11.103
Open-cell phosphate-based geopolymer foams by frothing
resolves10.1016/j.ceramint.2015.02.125
Fabrication and properties of microporous metakaolin-based geopolymer bodies with polylactic acid (PLA) fibers as pore generators
resolves10.1016/j.micromeso.2015.05.043
Synthesis of porous hierarchical geopolymer monoliths by ice-templating
resolves10.1016/j.jeurceramsoc.2017.01.030
Direct ink writing of geopolymeric inks
resolves10.1111/jace.12724
Geopolymer with Hierarchically Meso‐/Macroporous Structures from Reactive Emulsion Templating
resolves10.1533/9781845696382.1
Introduction to geopolymers
resolves10.1016/S1466-6049(00)00041-6
Synthesis and characterisation of materials based on inorganic polymers of alumina and silica: sodium polysialate polymers
resolves10.1016/j.conbuildmat.2019.117455
Geopolymers as an alternative to Portland cement: An overview
resolves10.1007/s11157-019-09494-0
Application of alkali-activated materials for water and wastewater treatment: a review
resolves10.1016/j.jenvman.2018.07.046
A review on geopolymers as emerging materials for the adsorption of heavy metals and dyes
resolves10.1016/j.jclepro.2018.09.265
Synthesis of porous biomass fly ash-based geopolymer spheres for efficient removal of methylene blue from wastewaters
resolves10.1016/j.cej.2016.11.079
Facile fabrication of green geopolymer/alginate hybrid spheres for efficient removal of Cu(II) in water: Batch and column studies
resolves10.1016/j.jclepro.2017.10.078
Biomass fly ash geopolymer monoliths for effective methylene blue removal from wastewaters
resolves10.1016/j.jclepro.2019.04.084
Use of modified bauxite residue-based porous inorganic polymer monoliths as adsorbents of methylene blue
resolves10.1289/ehp.99107s6907
Pharmaceuticals and personal care products in the environment: agents of subtle change?
resolves10.1016/j.scitotenv.2020.137222
Synthetic organic dyes as contaminants of the aquatic environment and their implications for ecosystems: A review
resolves10.1016/j.scitotenv.2013.12.065
A review on the occurrence of micropollutants in the aquatic environment and their fate and removal during wastewater treatment
resolves10.1016/j.cej.2017.04.106
Treatment technologies for emerging contaminants in water: A review
resolves10.1016/j.desal.2011.07.019
Cationic and anionic dye adsorption by agricultural solid wastes: A comprehensive review
resolves10.1016/j.jclepro.2019.04.384
Fly ash based geopolymer for the adsorption of anionic surfactant from aqueous solution
resolves10.1007/s10570-020-03011-1
Applications and impact of nanocellulose based adsorbents
resolves10.1002/cssc.201600903
Anionically Stabilized Cellulose Nanofibrils through Succinylation Pretreatment in Urea–Lithium Chloride Deep Eutectic Solvent
resolves10.1016/j.carbpol.2018.07.024
Recyclable deep eutectic solvent for the production of cationic nanocelluloses
resolves10.1007/s10570-019-02257-8
Direct sulfation of cellulose fibers using a reactive deep eutectic solvent to produce highly charged cellulose nanofibers
resolves10.1021/acs.biomac.6b00910
Acidic Deep Eutectic Solvents As Hydrolytic Media for Cellulose Nanocrystal Production
resolves10.1021/acsami.6b13625
Cellulose Nanofibrils from Nonderivatizing Urea-Based Deep Eutectic Solvent Pretreatments
resolves10.1016/j.cej.2018.05.163
Rapid uptake of pharmaceutical salbutamol from aqueous solutions with anionic cellulose nanofibrils: The importance of pH and colloidal stability in the interaction with ionizable pollutants
resolves10.1016/j.cej.2019.06.008
Efficient entrapment and separation of anionic pollutants from aqueous solutions by sequential combination of cellulose nanofibrils and halloysite nanotubes
resolves10.1016/j.matdes.2019.108115
Magnetic superabsorbents based on nanocellulose aerobeads for selective removal of oils and organic solvents
resolves10.1021/acsnano.8b00566
Shapeable Fibrous Aerogels of Metal–Organic-Frameworks Templated with Nanocellulose for Rapid and Large-Capacity Adsorption
resolves10.3390/ma12182999
Optimal Design of pH-neutral Geopolymer Foams for Their Use in Ecological Plant Cultivation Systems
resolves10.1088/1757-899X/706/1/012017
Neutral geopolymer foams reinforced with cellulose studied with the FT-Raman spectroscopy
resolves10.1016/j.clay.2013.03.010
Synthesis and mechanical properties of novel composites of inorganic polymers (geopolymers) with unidirectional natural flax fibres (phormium tenax)
resolves10.1111/jace.14542
Potassium‐Based Geopolymer Composites Reinforced with Chopped Bamboo Fibers
resolves10.1016/j.compositesb.2013.01.013
Characterisation of cotton fibre-reinforced geopolymer composites
resolves10.1007/s10570-019-02703-7
Assessment of chemical and mechanical behavior of bamboo pulp and nanofibrillated cellulose exposed to alkaline environments
resolves10.1016/j.cemconres.2010.04.008
Pore solution composition and alkali diffusion in inorganic polymer cement
resolves10.1016/j.jclepro.2016.12.008
Porous geopolymer spheres as novel pH buffering materials
resolves10.1021/ja01269a023
Adsorption of Gases in Multimolecular Layers
resolves10.1007/s10853-006-0637-z
Geopolymer technology: the current state of the art
resolves10.1016/j.ceramint.2014.05.108
A comparison between different foaming methods for the synthesis of light weight geopolymers
resolves10.1533/9781782422884.5.777
Innovative applications of inorganic polymers (geopolymers)
resolves10.1016/j.clay.2015.10.027
Metakaolin geopolymer characterization and application for ammonium removal from model solutions and landfill leachate
resolves10.1080/09593330.2017.1301572
Removal of ammonium from municipal wastewater with powdered and granulated metakaolin geopolymer
resolves10.1016/j.matlet.2013.11.008
Synthesis of a self-supporting faujasite zeolite membrane using geopolymer gel for separation of alcohol/water mixture
resolves10.1016/j.matlet.2015.09.062
Preparation of porous P-type zeolite spheres with suspension solidification method
resolves10.1016/j.clay.2016.05.011
Study on synthesis and characterization of ZSM-20 zeolites from metakaolin-based geopolymers
resolves10.1016/j.micromeso.2017.11.015
In situ transformation of geopolymer gels to self-supporting NaX zeolite monoliths with excellent compressive strength
resolves10.1021/acsami.7b08406
Determining the Mechanism and Efficiency of Industrial Dye Adsorption through Facile Structural Control of Organo-montmorillonite Adsorbents
resolves10.1021/cm050230i
Do Geopolymers Actually Contain Nanocrystalline Zeolites? A Reexamination of Existing Results
resolves10.1351/pac199466081739
Recommendations for the characterization of porous solids (Technical Report)
resolves10.1038/s41598-020-64228-5
Ag- or Cu-modified geopolymer filters for water treatment manufactured by 3D printing, direct foaming, or granulation
resolves10.1023/B:CELL.0000014766.31671.8d
Viscometric determination of dialdehyde content in periodate oxycellulose. Part I. Methodology
resolves10.1007/s10570-014-0351-y
Cationic wood cellulose films with high strength and bacterial anti-adhesive properties
resolves10.1016/S0032-3861(98)00828-3
Synthesis and antimicrobial activity of polymeric guanidine and biguanidine salts
resolves10.1016/j.jcis.2019.06.001
Self-assembled nanofibrils from RGD-functionalized cellulose nanocrystals to improve the performance of PEI/DNA polyplexes
resolves10.1002/smll.201702084
Optical Properties of Self‐Assembled Cellulose Nanocrystals Films Suspended at Planar–Symmetrical Interfaces
resolves10.1016/j.surfcoat.2017.01.111
The influences of silanes on interfacial adhesion and surface properties of nanocellulose film coating on glass and aluminum substrates
resolves10.1021/acsami.7b06304
Hydrophobic, Superabsorbing Aerogels from Choline Chloride-Based Deep Eutectic Solvent Pretreated and Silylated Cellulose Nanofibrils for Selective Oil Removal
resolves10.1016/j.ceramint.2016.10.205
High-porosity geopolymer membrane supports by peroxide route with the addition of egg white as surfactant
resolves10.1111/ijac.13062
Innovation in ceramic foam filters manufacturing process
resolves10.1080/09593330.2018.1430853
Preparation of affordable and multifunctional clay-based ceramic filter matrix for treatment of drinking water
resolves10.3844/ajessp.2012.79.94
Permeability, Strength and Filtration Performance for Uncoated and Titania-Coated Clay Wastewater Filters
The 1 reference without a DOI — listed, not checked
no DOI — not checkedOrganic Chemistry
What this badge says. CiteStamped means the CHECKABLE references of this work were clean at the dated check: each resolved to a known work in a public registry, and none carried a retraction notice at that time. It says nothing about the quality, findings, or importance of the work itself, and nothing about references deposited without a DOI.

checked 2026-07-26 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record

Embed this badge

Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.

<a href="https://citestamp.com/citestamped/10.1021/acsami.0c05927"><img src="https://citestamp.com/citestamped/10.1021/acsami.0c05927/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[![CiteStamped reference-health badge](https://citestamp.com/citestamped/10.1021/acsami.0c05927/badge.svg)](https://citestamp.com/citestamped/10.1021/acsami.0c05927)