Reference health

Applications of ZnO in organic and hybrid solar cells

1 of 151 checkable references need attention · checked 2026-07-23

At the dated check, the references listed below either did not resolve in Crossref or DataCite, or carried a retraction notice. Each one is shown with the registry record that put it there.

1 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.

References needing attention

marked retracted — notice via Crossref, record curated by Retraction Watch10.1016/j.pmatsci.2004.04.001

RETRACTED: Recent progress in processing and properties of ZnO

The 150 checked references that resolve

resolves10.1109/JSTQE.2010.2077690

Introduction to the Issue on Next-Generation Organic and Hybrid Solar Cells

resolves10.1002/anie.200702506

Polymer–Fullerene Composite Solar Cells

resolves10.1039/c1ee01254a

An efficient DSSC based on ZnO nanowire photo-anodes and a new D-π-A organic dye

resolves10.1039/b915725e

High-efficiency metal-free organic-dye-sensitized solar cells with hierarchical ZnO photoelectrode

resolves10.1039/b902595m

Efficient electron transport in tetrapod-like ZnO metal-free dye-sensitized solar cells

resolves10.1039/c1ee01218e

From nanowires to hierarchical structures of template-free electrodeposited ZnO for efficient dye-sensitized solar cells

resolves10.1039/b706547g

Hybrid polymer–metal oxide thin films for photovoltaic applications

resolves10.1002/adma.200306659

Efficient Hybrid Solar Cells from Zinc Oxide Nanoparticles and a Conjugated Polymer

resolves10.1126/science.1069156

Hybrid Nanorod-Polymer Solar Cells

resolves10.1016/j.cplett.2003.12.045

Influence of solvent on film morphology and device performance of poly(3-hexylthiophene):TiO2 nanocomposite solar cells

resolves10.1039/C0EE00448K

Solution-derived ZnOnanostructures for photoanodes of dye-sensitized solar cells

resolves10.1063/1.115797

Exciton diffusion and dissociation in a poly(p-phenylenevinylene)/C60 heterojunction photovoltaic cell

resolves10.1021/jp0509663

Accurate Measurement of the Exciton Diffusion Length in a Conjugated Polymer Using a Heterostructure with a Side-Chain Cross-Linked Fullerene Layer

resolves10.1103/PhysRevB.72.045217

Simultaneous enhancement of charge transport and exciton diffusion in poly(<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mi>p</mml:mi></mml:math>-phenylene vinylene) derivatives

resolves10.1126/science.270.5243.1789

Polymer Photovoltaic Cells: Enhanced Efficiencies via a Network of Internal Donor-Acceptor Heterojunctions

resolves10.1038/376498a0

Efficient photodiodes from interpenetrating polymer networks

resolves10.1039/b812502n

Organic photovoltaics

resolves10.1016/j.cis.2007.09.001

Nanoparticle–polymer photovoltaic cells

resolves10.1039/c0ee00143k

Bulk-heterojunction hybrid solar cells based on colloidal nanocrystals and conjugated polymers

resolves10.1088/0953-8984/16/25/R01

Zinc oxide nanostructures: growth, properties and applications

resolves10.1021/jp056246d

Polymer-Controlled Crystallization of Zinc Oxide Hexagonal Nanorings and Disks

resolves10.1021/nl050788p

General Route to Vertical ZnO Nanowire Arrays Using Textured ZnO Seeds

resolves10.1002/anie.200351461

Low‐Temperature Wafer‐Scale Production of ZnO Nanowire Arrays

resolves10.1021/jp050745x

Hybrid Zinc Oxide Conjugated Polymer Bulk Heterojunction Solar Cells

resolves10.1002/adfm.200500201

Hybrid Solar Cells Using a Zinc Oxide Precursor and a Conjugated Polymer

resolves10.1021/cm070555u

Hybrid Polymer Solar Cells from Highly Reactive Diethylzinc: MDMO–PPV versus P3HT

resolves10.1021/jp911125w

Hybrid Bulk Heterojunction Solar Cells Based on P3HT and Porphyrin-Modified ZnO Nanorods

resolves10.1002/adfm.200500573

Hybrid Solar Cells from Regioregular Polythiophene and ZnO Nanoparticles

resolves10.1038/nmat2533

The effect of three-dimensional morphology on the efficiency of hybrid polymer solar cells

resolves10.1016/j.solmat.2008.02.028

Photovoltaic devices based on PPHT: ZnO and dye-sensitized PPHT: ZnO thin films

resolves10.1016/j.solmat.2005.05.012

Charge generation and photovoltaic properties of hybrid solar cells based on ZnO and copper phthalocyanines (CuPc)

resolves10.1002/adfm.200500420

Charge Transport and Photocurrent Generation in Poly(3‐hexylthiophene): Methanofullerene Bulk‐Heterojunction Solar Cells

resolves10.1016/j.solmat.2006.04.007

A review on highly ordered, vertically oriented TiO2 nanotube arrays: Fabrication, material properties, and solar energy applications

resolves10.1109/JSTQE.2010.2040948

Polymer/Metal Oxide Nanocrystals Hybrid Solar Cells

resolves10.1021/jp9116563

Highly Dispersed RuO2 Nanoparticles on Carbon Nanotubes: Facile Synthesis and Enhanced Supercapacitance Performance

resolves10.1021/jz900356u

Control of Photocurrent Generation in Polymer/ZnO Nanorod Solar Cells by Using a Solution-Processed TiO2 Overlayer

resolves10.1021/jp0757816

Effect of Polymer Processing on the Performance of Poly(3-hexylthiophene)/ZnO Nanorod Photovoltaic Devices

resolves10.1021/jp802626u

Effect of ZnO Processing on the Photovoltage of ZnO/Poly(3-hexylthiophene) Solar Cells

resolves10.1021/jp911263d

Efficient Semiconductor-Sensitized Solar Cells Based on Poly(3-hexylthiophene)@CdSe@ZnO Core−Shell Nanorod Arrays

resolves10.1002/smll.200901968

Electrochemical Deposition of ZnO Nanorods on Transparent Reduced Graphene Oxide Electrodes for Hybrid Solar Cells

resolves10.1039/b602084d

Hybrid polymer/metal oxide solar cells based on ZnO columnar structures

resolves10.1016/j.tsf.2005.08.179

Hybrid photovoltaic devices of polymer and ZnO nanofiber composites

resolves10.1063/1.3080203

The influence of interface modifier on the performance of nanostructured ZnO/polymer hybrid solar cells

resolves10.1021/nl9036752

Oligo- and Polythiophene/ZnO Hybrid Nanowire Solar Cells

resolves10.1021/jp0571372

Hybrid Polymer/Zinc Oxide Photovoltaic Devices with Vertically Oriented ZnO Nanorods and an Amphiphilic Molecular Interface Layer

resolves10.1021/jp077593l

ZnO−TiO2 Core−Shell Nanorod/P3HT Solar Cells

resolves10.1039/B811536B

Vertically-aligned nanostructures of ZnO for excitonic solar cells: a review

resolves10.1002/pssa.200925591

Control of charge separation by electric field manipulation in polymer‐oxide hybrid organic photovoltaic bilayer devices

resolves10.1002/adfm.200600215

Band‐Offset Engineering for Enhanced Open‐Circuit Voltage in Polymer–Oxide Hybrid Solar Cells

resolves10.1016/j.tsf.2007.12.037

The backing layer dependence of open circuit voltage in ZnO/polymer composite solar cells

resolves10.1021/jp909376f

Simple Approach to Hybrid Polymer/Porous Metal Oxide Solar Cells from Solution-Processed ZnO Nanocrystals

resolves10.1063/1.1992666

A comprehensive review of ZnO materials and devices

resolves10.1016/S0921-5107(00)00604-8

Recent advances in ZnO materials and devices

resolves10.1039/C0EE00273A

The role of buffer layers in polymer solar cells

resolves10.1016/j.pquantelec.2010.04.001

ZnO nanostructures for optoelectronics: Material properties and device applications

resolves10.1080/15583724.2010.515764

A Review on the Development of the Inverted Polymer Solar Cell Architecture

resolves10.1016/j.solmat.2009.10.005

Polymer solar cells: Recent development and possible routes for improvement in the performance

resolves10.1016/j.solmat.2007.01.015

Low band gap polymers for organic photovoltaics

resolves10.1021/cm070893v

High Efficiency Organic Photovoltaics Incorporating a New Family of Soluble Fullerene Derivatives

resolves10.1039/b925382c

Interface investigation and engineering – achieving high performance polymer photovoltaic devices

resolves10.1039/C0JM02354J

Room temperature ZnO growth by rf magnetron sputtering on top of photoactive P3HT: PCBM for organic solar cells

resolves10.1016/j.solmat.2007.12.004

Preparation and characterization of nano-scale ZnO as a buffer layer for inkjet printing of silver cathode in polymer solar cells

resolves10.1063/1.2784961

The use of ZnO as optical spacer in polymer solar cells: Theoretical and experimental study

resolves10.1002/adfm.200902236

Interface Engineering for Organic Electronics

resolves10.1002/adma.200801082

Photocurrent Enhancement in Polythiophene‐ and Alkanethiol‐Modified ZnO Solar Cells

resolves10.1063/1.1543638

Molecular modification of an ionic semiconductor–metal interface: ZnO/molecule/Au diodes

resolves10.1063/1.2919524

Self-assembled monolayer modified ZnO/metal bilayer cathodes for polymer/fullerene bulk-heterojunction solar cells

resolves10.1002/adma.200703050

Polymer Solar Cells That Use Self‐Assembled‐Monolayer‐ Modified ZnO/Metals as Cathodes

resolves10.1016/j.apsusc.2009.02.054

ZnO thin films fabricated by chemical bath deposition, used as buffer layer in organic solar cells

resolves10.1016/j.apsusc.2010.03.118

Metal oxide buffer layer for improving performance of polymer solar cells

resolves10.1021/jp1003984

Solution-Processed Zinc Oxide Thin Film as a Buffer Layer for Polymer Solar Cells with an Inverted Device Structure

resolves10.1039/C0JM03048A

Inverted organic photovoltaic devices with high efficiency and stability based on metal oxide charge extraction layers

resolves10.1039/B921396A

Highly efficient flexible inverted organic solar cells using atomic layer deposited ZnO as electron selective layer

resolves10.1007/s10971-009-2048-5

Efficient charge collection with sol–gel derived colloidal ZnO thin film in photovoltaic devices

resolves10.1063/1.2359579

Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer

resolves10.1007/s11814-010-0117-7

Optimization of inverted bulk heterojunction polymer solar cells

resolves10.1063/1.3464973

Improved photoinduced charge carriers separation in organic-inorganic hybrid photovoltaic devices

resolves10.1088/0022-3727/37/6/007

Effect of ZnO layer on characteristics of conducting polymer/C60photovoltaic cell

resolves10.3390/ma3114915

Photovoltaic Properties in Interpenetrating Heterojunction Organic Solar Cells Utilizing MoO3 and ZnO Charge Transport Buffer Layers

resolves10.1016/j.cplett.2009.01.033

Inverted photovoltaic device based on ZnO and organic small molecule heterojunction

resolves10.1039/C0JM02349C

Determination of energy level alignment at interfaces of hybrid and organic solar cells under ambient environment

resolves10.1016/j.synthmet.2005.07.172

Improvement of characteristics on polymer photovoltaic cells composed of conducting polymer - fullerene systems

resolves10.1002/adma.201001339

6.5% Efficiency of Polymer Solar Cells Based on poly(3‐hexylthiophene) and Indene‐C60 Bisadduct by Device Optimization

resolves10.1021/ja108259n

Combination of Indene-C60 Bis-Adduct and Cross-Linked Fullerene Interlayer Leading to Highly Efficient Inverted Polymer Solar Cells

resolves10.1021/ja100236b

Highly Efficient and Stable Inverted Polymer Solar Cells Integrated with a Cross-Linked Fullerene Material as an Interlayer

resolves10.1021/ja909111p

Ladder-Type Oligo-p-phenylene-Containing Copolymers with High Open-Circuit Voltages and Ambient Photovoltaic Activity

resolves10.1063/1.3518074

Solution-processed cross-linkable hole selective layer for polymer solar cells in the inverted structure

resolves10.1021/jz200045x

Role of ZnO Electron-Selective Layers in Regular and Inverted Bulk Heterojunction Solar Cells

resolves10.1063/1.3039076

An inverted organic solar cell employing a sol-gel derived ZnO electron selective layer and thermal evaporated MoO3 hole selective layer

resolves10.1016/j.orgel.2010.08.009

Sol–gel processed CuOx thin film as an anode interlayer for inverted polymer solar cells

resolves10.1002/adma.201001033

A Metal‐Oxide Interconnection Layer for Polymer Tandem Solar Cells with an Inverted Architecture

resolves10.1021/am900446x

Characterization of Inverted-Type Organic Solar Cells with a ZnO Layer as the Electron Collection Electrode by ac Impedance Spectroscopy

resolves10.1016/j.tsf.2010.04.010

Morphological evolution of the poly(3-hexylthiophene)/[6,6]-phenyl-C61-butyric acid methyl ester, oxidation of the silver electrode, and their influences on the performance of inverted polymer solar cells with a sol–gel derived zinc oxide electron selective layer

resolves10.1063/1.2945281

Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer

resolves10.1021/ja204056m

Dithienogermole As a Fused Electron Donor in Bulk Heterojunction Solar Cells

resolves10.1002/adma.201004301

Inverted Polymer Solar Cells Integrated with a Low‐Temperature‐Annealed Sol‐Gel‐Derived ZnO Film as an Electron Transport Layer

resolves10.1016/S1369-7021(04)00286-X

Nanostructures of zinc oxide

resolves10.1016/S1369-7021(07)70078-0

ZnO – nanostructures, defects, and devices

resolves10.1002/1521-3773(20020402)41:7<1188::AID-ANIE1188>3.0.CO;2-5

Self-Assembly of ZnO: From Nanodots to Nanorods

resolves10.1103/PhysRevLett.89.036801

Staircase in the Electron Mobility of a ZnO Quantum Dot Assembly due to Shell Filling

resolves10.1039/C0JM02184A

Charge transport in flexible solar cells based on conjugated polymer and ZnO nanoparticulate thin films

resolves10.1109/JPROC.2010.2044550

ZnO Devices and Applications: A Review of Current Status and Future Prospects

resolves10.1016/j.orgel.2009.05.017

Solution-processed vanadium oxide as an anode interlayer for inverted polymer solar cells hybridized with ZnO nanorods

resolves10.1088/0957-4484/19/43/435706

Fabrication of oriented ZnO nanopillar self-assemblies and their application for photovoltaic devices

resolves10.1016/j.tsf.2009.07.086

Study on the bulk junction type organic solar cells with double zinc oxide layer

resolves10.1063/1.3126955

Organic/inorganic hybrid solar cells with vertically oriented ZnO nanowires

resolves10.1021/jp071418n

Efficient Charge Collection with ZnO Nanorod Array in Hybrid Photovoltaic Devices

resolves10.1039/c0jm00385a

Improvement in photovoltaic performance for hybrid P3HT/elongated CdS nanocrystals solar cells with F-doped SnO2 arrays

resolves10.1063/1.2972113

Efficiency enhancement of polymer photovoltaic devices hybridized with ZnO nanorod arrays by the introduction of a vanadium oxide buffer layer

resolves10.1143/JJAP.47.8049

Charge Separation Interfaces in Polymer Photovoltaic Devices Hybridized with ZnO Nanorod Arrays

resolves10.1016/j.solener.2009.12.013

Electrochemically grown ZnO nanorods for hybrid solar cell applications

resolves10.1016/j.solmat.2009.04.016

Lengthening the polymer solidification time to improve the performance of polymer/ZnO nanorod hybrid solar cells

resolves10.1038/nmat2102

Morphology evolution via self-organization and lateral and vertical diffusion in polymer:fullerene solar cell blends

resolves10.1016/j.solmat.2009.04.007

Fabrication of organic photovoltaic cells with double-layer ZnO structure

resolves10.1143/JJAP.49.128003

Fabrication of ZnO Nanopillars and Their Application to Organic Photovoltaic Cells Based on Conducting Polymer and Fullerene

resolves10.1021/jp0734225

The Effect of Atmosphere and ZnO Morphology on the Performance of Hybrid Poly(3-hexylthiophene)/ZnO Nanofiber Photovoltaic Devices

resolves10.1016/j.orgel.2009.08.011

ZnO nano-ridge structure and its application in inverted polymer solar cell

resolves10.1002/adma.201100414

Towards Efficient Hybrid Solar Cells Based on Fully Polymer Infiltrated ZnO Nanorod Arrays

resolves10.1063/1.3478880

Vertically aligned ZnO nanodisks and their uses in bulk heterojunction solar cells

resolves10.1021/jp1013658

Enhanced Power Conversion Efficiency of Inverted Organic Solar Cells with a Ga-Doped ZnO Nanostructured Thin Film Prepared Using Aqueous Solution

resolves10.1109/JSTQE.2009.2039200

Improved Inverted Organic Solar Cells With a Sol–Gel Derived Indium-Doped Zinc Oxide Buffer Layer

resolves10.1016/j.sse.2008.10.014

Efficient electron transfers in ZnO nanorod arrays with N719 dye for hybrid solar cells

resolves10.1039/c0jm03688a

Surface modification of metal oxide using ionic liquid molecules in hybrid organic–inorganic optoelectronic devices

resolves10.1117/12.825970

Performance enhancement of organic/inorganic hybrid solar cells by improving the optical absorption of polymer

resolves10.1021/am100238e

Effect of Chemical Modification of Fullerene-Based Self-Assembled Monolayers on the Performance of Inverted Polymer Solar Cells

resolves10.1063/1.3028094

High performance ambient processed inverted polymer solar cells through interfacial modification with a fullerene self-assembled monolayer

resolves10.1016/j.orgel.2009.02.019

Spraycoating of silver nanoparticle electrodes for inverted polymer solar cells

resolves10.1016/j.orgel.2009.06.019

Indium tin oxide-free semi-transparent inverted polymer solar cells using conducting polymer as both bottom and top electrodes

resolves10.1109/JSTQE.2010.2047098

Optimization of Active Layer and Anode Electrode for High-Performance Inverted Bulk-Heterojunction Solar Cells

resolves10.1063/1.3530431

Solution processed inverted tandem polymer solar cells with self-assembled monolayer modified interfacial layers

resolves10.1002/adma.201003083

Multifunctional SWCNT‐ZnO Nanocomposites for Enhancing Performance and Stability of Organic Solar Cells

resolves10.1088/0957-4484/20/46/465204

Increased short circuit current in organic photovoltaic using high-surface area electrode based on ZnO nanowires decorated with CdTe quantum dots

resolves10.1016/j.solmat.2010.10.015

The effect of C60 on the ZnO-nanorod surface in organic–inorganic hybrid photovoltaics

resolves10.1016/j.solmat.2008.11.033

Effects of intrinsic ZnO buffer layer based on P3HT/PCBM organic solar cells with Al-doped ZnO electrode

resolves10.1063/1.3142423

Aluminum doped zinc oxide for organic photovoltaics

resolves10.1016/j.solmat.2009.07.016

Characteristics of indium-free GZO/Ag/GZO and AZO/Ag/AZO multilayer electrode grown by dual target DC sputtering at room temperature for low-cost organic photovoltaics

resolves10.1016/j.solmat.2010.09.036

Effects of deposition temperature on characteristics of Ga-doped ZnO film prepared by highly efficient cylindrical rotating magnetron sputtering for organic solar cells

resolves10.1016/j.solmat.2010.08.002

Bulk heterojunction solar cells with NiO hole transporting layer based on AZO anode

resolves10.1557/mrs2000.151

Criteria for Choosing Transparent Conductors

resolves10.1557/mrs2007.29

Transparent Conducting Oxides for Photovoltaics

resolves10.1063/1.2218466

Electrical properties of transparent and conducting Ga doped ZnO

resolves10.1143/JJAP.47.867

Ga-Doped ZnO Film as a Transparent Electrode for Phthalocyanine/Perylene Heterojunction Solar Cell

resolves10.1016/j.synthmet.2009.08.036

Semitransparent organic photovoltaic cell with carbon nanotube-sheet anodes and Ga-doped ZnO cathodes

resolves10.1021/nl034810v

Design of Nanostructured Heterojunction Polymer Photovoltaic Devices

resolves10.1021/cm049654n

Conjugated Polymer Photovoltaic Cells

resolves10.1002/adfm.200400277

Infiltration of Regioregular Poly[2,2′‐(3‐hexylthiopene)] into Random Nanocrystalline TiO2 Networks

resolves10.1016/S0038-1098(96)00715-6

Electronic excitations in luminescent conjugated polymers

resolves10.1016/S1369-7021(07)70276-6

Polymer-based solar cells

resolves10.1557/mrs2009.27

Nanostructured Organic–Inorganic Hybrid Solar Cells

resolves10.1002/adfm.200600371

Device Operation of Conjugated Polymer/Zinc Oxide Bulk Heterojunction Solar Cells

The 1 reference without a DOI — listed, not checked

no DOI — not checkedc1ee01873f-(cit95)/*[position()=1]

What this badge says. CiteStamped means the CHECKABLE references of this work were clean at the dated check: each resolved to a known work in a public registry, and none carried a retraction notice at that time. It says nothing about the quality, findings, or importance of the work itself, and nothing about references deposited without a DOI.

checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record

view as graph · paper page

Embed this badge

Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.

<a href="https://citestamp.com/citestamped/10.1039/c1ee01873f"><img src="https://citestamp.com/citestamped/10.1039/c1ee01873f/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>

[![CiteStamped reference-health badge](https://citestamp.com/citestamped/10.1039/c1ee01873f/badge.svg)](https://citestamp.com/citestamped/10.1039/c1ee01873f)