Reference health
Progress, challenges and perspectives in flexible perovskite solar cells
1 of 189 checkable references need attention · checked 2026-07-24
At the dated check, the references listed below either did not resolve in Crossref or DataCite, or carried a retraction notice. Each one is shown with the registry record that put it there.
25 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
References needing attention
does not resolve to a known work10.1002/aenm.201500963.
The 188 checked references that resolve
resolves10.1016/j.rser.2014.08.046
Global prospects, progress, policies, and environmental impact of solar photovoltaic power generation
resolves10.1039/c2ee23073a
Modeling low cost hybrid tandem photovoltaics with the potential for efficiencies exceeding 20%
resolves10.1108/IJESM-04-2014-0007
Economic sustainability of ground mounted photovoltaic systems: an Italian case study
resolves10.1016/j.apenergy.2013.12.032
China’s solar photovoltaic industry development: The status quo, problems and approaches
resolves10.1126/sciadv.1501170
Efficient luminescent solar cells based on tailored mixed-cation perovskites
resolves10.1038/nenergy.2015.17
A molecularly engineered hole-transporting material for efficient perovskite solar cells
resolves10.1039/C5EE03874J
Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency
resolves10.1126/science.aaa9272
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
resolves10.1002/pip.2557
High efficiency photovoltaic module based on mesoscopic organometal halide perovskite
resolves10.1021/ja809598r
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
resolves10.1006/jssc.1995.1023
Transport, Optical, and Magnetic Properties of the Conducting Halide Perovskite CH3NH3SnI3
resolves10.1038/srep00591
Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%
resolves10.1126/science.1228604
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
resolves10.1002/adfm.201302090
Morphological Control for High Performance, Solution‐Processed Planar Heterojunction Perovskite Solar Cells
resolves10.1038/nature12340
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
resolves10.1021/cm970568f
Synthesis and Characterization of Organic−Inorganic Perovskite Thin Films Prepared Using a Versatile Two-Step Dipping Technique
resolves10.1039/C4TA06128D
Improvement of the humidity stability of organic–inorganic perovskite solar cells using ultrathin Al
<sub>2</sub>
O
<sub>3</sub>
layers prepared by atomic layer deposition
resolves10.1039/C5TA00358J
Degradation observations of encapsulated planar CH
<sub>3</sub>
NH
<sub>3</sub>
PbI
<sub>3</sub>
perovskite solar cells at high temperatures and humidity
resolves10.1021/nn506864k
Investigation of CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub> Degradation Rates and Mechanisms in Controlled Humidity Environments Using <i>in Situ</i> Techniques
resolves10.1038/ncomms3885
Overcoming ultraviolet light instability of sensitized TiO2 with meso-superstructured organometal tri-halide perovskite solar cells
resolves10.1021/nl501982b
Carbon Nanotube/Polymer Composites as a Highly Stable Hole Collection Layer in Perovskite Solar Cells
resolves10.1016/j.jpowsour.2014.12.008
Perovskite solar cells and large area modules (100 cm 2 ) based on an air flow-assisted PbI 2 blade coating deposition process
resolves10.1063/1.4922375
Bifacial Si heterojunction-perovskite organic-inorganic tandem to produce highly efficient (ηT* <b>∼</b> 33%) solar cell
resolves10.1039/C4CP03788J
Organic–inorganic halide perovskite/crystalline silicon four-terminal tandem solar cells
resolves10.1002/aenm.201500799
Monolithic Perovskite‐CIGS Tandem Solar Cells via In Situ Band Gap Engineering
resolves10.1021/acsnano.5b03189
Multilayer Transparent Top Electrode for Solution Processed Perovskite/Cu(In,Ga)(Se,S)<sub>2</sub> Four Terminal Tandem Solar Cells
resolves10.1038/nphoton.2013.342
Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques
resolves10.1002/polb.22227
Substrates for flexible electronics: A practical investigation on the electrical, film flexibility, optical, temperature, and solvent resistance properties
resolves10.1016/j.rser.2011.06.004
Review of materials and manufacturing options for large area flexible dye solar cells
resolves10.1038/ncomms8410
High-performance flexible perovskite solar cells exploiting Zn2SnO4 prepared in solution below 100 °C
resolves10.1038/ncomms10214
High-efficiency robust perovskite solar cells on ultrathin flexible substrates
resolves10.1039/C5TA09520D
Highly efficient low temperature solution processable planar type CH
<sub>3</sub>
NH
<sub>3</sub>
PbI
<sub>3</sub>
perovskite flexible solar cells
resolves10.1039/C5CC06759F
Highly-efficient dye-sensitized solar cells with collaborative sensitization by silyl-anchor and carboxy-anchor dyes
resolves10.1016/j.apenergy.2013.08.056
Outdoor and diurnal performance of large conformal flexible metal/plastic dye solar cells
resolves10.1016/j.mattod.2013.12.002
Current progress and future perspectives for organic/inorganic perovskite solar cells
resolves10.1007/s11434-014-0259-9
Organolead halide perovskites: a family of promising semiconductor materials for solar cells
resolves10.1103/PhysRevLett.84.5636
Compositional Inversion Symmetry Breaking in Ferroelectric Perovskites
resolves10.1126/science.aaa5760
Electron-hole diffusion lengths > 175 μm in solution-grown CH
<sub>3</sub>
NH
<sub>3</sub>
PbI
<sub>3</sub>
single crystals
resolves10.1021/acs.jpcc.5b02784
CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub> and CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3–<i>x</i></sub>Cl<sub><i>x</i></sub> in Planar or Mesoporous Perovskite Solar Cells: Comprehensive Insight into the Dependence of Performance on Architecture
resolves10.1021/ja512117e
Crystallization Kinetics of Organic–Inorganic Trihalide Perovskites and the Role of the Lead Anion in Crystal Growth
resolves10.1126/science.1254763
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
resolves10.1038/srep04506
Fatigue degradation and electric recovery in Silicon solar cells embedded in photovoltaic modules
resolves10.1016/j.solmat.2005.09.025
Sliver® solar cells: A new thin-crystalline silicon photovoltaic technology
resolves10.1016/j.solmat.2003.11.030
Thin film GaAs solar cells with increased quantum efficiency due to light reflection
resolves10.1038/ncomms3306
Doping of polycrystalline CdTe for high-efficiency solar cells on flexible metal foil
resolves10.1016/j.solmat.2009.12.029
Highly efficient plastic-substrate dye-sensitized solar cells with validated conversion efficiency of 7.6%
resolves10.1149/1.2909548
Fabrication of an Efficient Dye-Sensitized Solar Cell with Stainless Steel Substrate
resolves10.1016/j.apenergy.2015.07.031
Characterization of photovoltaic devices for indoor light harvesting and customization of flexible dye solar cells to deliver superior efficiency under artificial lighting
resolves10.1016/j.solmat.2009.04.020
Roll-to-roll fabrication of monolithic large-area polymer solar cells free from indium-tin-oxide
resolves10.1038/nmat4388
Flexible high power-per-weight perovskite solar cells with chromium oxide–metal contacts for improved stability in air
resolves10.1038/ncomms9932
Low-temperature-processed efficient semi-transparent planar perovskite solar cells for bifacial and tandem applications
resolves10.1016/j.solmat.2015.03.016
TCO-free flexible organo metal trihalide perovskite planar-heterojunction solar cells
resolves10.1016/j.solmat.2008.12.001
A complete process for production of flexible large area polymer solar cells entirely using screen printing—First public demonstration
resolves10.1016/j.jpowsour.2014.12.104
Low temperature processing of flexible planar perovskite solar cells with efficiency over 10%
resolves10.1039/C4EE02441A
Highly efficient and bending durable perovskite solar cells: toward a wearable power source
resolves10.1038/ncomms3761
Efficient organometal trihalide perovskite planar-heterojunction solar cells on flexible polymer substrates
resolves10.1021/acs.nanolett.5b02126
Working Mechanism for Flexible Perovskite Solar Cells with Simplified Architecture
resolves10.1039/C4TA02637C
Effect of CH
<sub>3</sub>
NH
<sub>3</sub>
PbI
<sub>3</sub>
thickness on device efficiency in planar heterojunction perovskite solar cells
resolves10.1039/C4MH00238E
Charge selective contacts, mobile ions and anomalous hysteresis in organic–inorganic perovskite solar cells
resolves10.1039/C5EE02155C
High efficiency flexible perovskite solar cells using superior low temperature TiO
<sub>2</sub>
resolves10.1039/C5TA07515G
An electron beam evaporated TiO
<sub>2</sub>
layer for high efficiency planar perovskite solar cells on flexible polyethylene terephthalate substrates
resolves10.1021/acsnano.5b04284
Highly Efficient Flexible Perovskite Solar Cells with Antireflection and Self-Cleaning Nanostructures
resolves10.1016/j.nanoen.2015.10.006
Encapsulation for improving the lifetime of flexible perovskite solar cells
resolves10.1039/C5NR08836D
Efficient, flexible and mechanically robust perovskite solar cells on inverted nanocone plastic substrates
resolves10.1039/C5TA00011D
Fabrication of metal-oxide-free CH
<sub>3</sub>
NH
<sub>3</sub>
PbI
<sub>3</sub>
perovskite solar cells processed at low temperature
resolves10.1021/acs.jpcc.5b00933
An Insight into Atmospheric Plasma Jet Modified ZnO Quantum Dots Thin Film for Flexible Perovskite Solar Cell: Optoelectronic Transient and Charge Trapping Studies
resolves10.1021/acsphotonics.5b00119
High-Performance Flexible Perovskite Solar Cells by Using a Combination of Ultrasonic Spray-Coating and Low Thermal Budget Photonic Curing
resolves10.1039/C4DT03920C
Exclusion of metal oxide by an RF sputtered Ti layer in flexible perovskite solar cells: energetic interface between a Ti layer and an organic charge transporting layer
resolves10.1002/aenm.201401808
Flexible Perovskite Photovoltaic Modules and Solar Cells Based on Atomic Layer Deposited Compact Layers and UV‐Irradiated TiO<sub>2</sub> Scaffolds on Plastic Substrates
resolves10.1002/aenm.201500569
Upscaling of Perovskite Solar Cells: Fully Ambient Roll Processing of Flexible Perovskite Solar Cells with Printed Back Electrodes
resolves10.1021/jp512101d
Low-Temperature Processed and Carbon-Based ZnO/CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub>/C Planar Heterojunction Perovskite Solar Cells
resolves10.1039/c3cc46534a
Flexible, low-temperature, solution processed ZnO-based perovskite solid state solar cells
resolves10.1002/adma.201404598
Toward Large Scale Roll‐to‐Roll Production of Fully Printed Perovskite Solar Cells
resolves10.1063/1.4864316
Channeling of electron transport to improve collection efficiency in mesoporous titanium dioxide dye sensitized solar cell stacks
resolves10.1002/(SICI)1521-396X(199802)165:2<R5::AID-PSSA99995>3.0.CO;2-9
Electron Drift Mobility in Porous TiO2 (Anatase)
resolves10.1063/1.1790587
Wide-bandgap high-mobility ZnO thin-film transistors produced at room temperature
resolves10.1039/C4TA03056G
Multiporous nanofibers of SnO
<sub>2</sub>
by electrospinning for high efficiency dye-sensitized solar cells
resolves10.1016/j.jallcom.2015.05.120
One pot synthesis of multi-functional tin oxide nanostructures for high efficiency dye-sensitized solar cells
resolves10.1016/j.jpowsour.2015.06.037
Tin oxide as a photoanode for dye-sensitised solar cells: Current progress and future challenges
resolves10.1063/1.2945281
Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer
resolves10.1021/nn406020d
Low-Temperature Solution-Processed Perovskite Solar Cells with High Efficiency and Flexibility
resolves10.1021/acs.chemmater.5b01598
Origin of the Thermal Instability in CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub> Thin Films Deposited on ZnO
resolves10.1039/C4CC04685D
The effect of ALD-Zno layers on the formation of CH
<sub>3</sub>
NH
<sub>3</sub>
PbI
<sub>3</sub>
with different perovskite precursors and sintering temperatures
resolves10.1016/j.orgel.2013.03.037
Blocking layer optimisation of poly(3-hexylthiopene) based Solid State Dye Sensitized Solar Cells
resolves10.1039/C5TA03240G
Efficient, durable and flexible perovskite photovoltaic devices with Ag-embedded ITO as the top electrode on a metal substrate
resolves10.1002/aenm.201300101
Fully Plastic Dye Solar Cell Devices by Low‐Temperature UV‐Irradiation of both the Mesoporous TiO<sub>2</sub> Photo‐ and Platinized Counter‐Electrodes
resolves10.1021/nl500399m
Nanocrystalline Rutile Electron Extraction Layer Enables Low-Temperature Solution Processed Perovskite Photovoltaics with 13.7% Efficiency
resolves10.1039/C5TA06177F
Brookite TiO
<sub>2</sub>
as a low-temperature solution-processed mesoporous layer for hybrid perovskite solar cells
resolves10.1063/1.4890245
An easy-to-fabricate low-temperature TiO2 electron collection layer for high efficiency planar heterojunction perovskite solar cells
resolves10.1021/acsnano.5b07043
Pinhole-Free and Surface-Nanostructured NiO<sub><i>x</i></sub> Film by Room-Temperature Solution Process for High-Performance Flexible Perovskite Solar Cells with Good Stability and Reproducibility
resolves10.1016/j.nanoen.2015.10.010
A general fabrication procedure for efficient and stable planar perovskite solar cells: Morphological and interfacial control by in-situ-generated layered perovskite
resolves10.1021/acsnano.5b08135
Highly Efficient Flexible Perovskite Solar Cells Using Solution-Derived NiO<sub><i>x</i></sub> Hole Contacts
resolves10.1002/adma.201404147
Layer‐by‐Layer Growth of CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3−<i>x</i></sub>Cl<sub><i>x</i></sub> for Highly Efficient Planar Heterojunction Perovskite Solar Cells
resolves10.1039/C5TA05026J
High-performance inverted planar perovskite solar cells without a hole transport layer via a solution process under ambient conditions
resolves10.1039/C4RA13212B
Low-temperature processed high-performance flexible perovskite solar cells via rationally optimized solvent washing treatments
resolves10.1021/acs.chemmater.5b00041
Non-Thermal Annealing Fabrication of Efficient Planar Perovskite Solar Cells with Inclusion of NH<sub>4</sub>Cl
resolves10.1002/aenm.201500328
High‐Performance Fully Printable Perovskite Solar Cells via Blade‐Coating Technique under the Ambient Condition
resolves10.1039/C5TA07008B
Interfacial engineering of self-assembled monolayer modified semi-roll-to-roll planar heterojunction perovskite solar cells on flexible substrates
resolves10.1039/C4CP00298A
High voltage and efficient bilayer heterojunction solar cells based on an organic–inorganic hybrid perovskite absorber with a low-cost flexible substrate
resolves10.1063/1.124789
Built-in field electroabsorption spectroscopy of polymer light-emitting diodes incorporating a doped poly(3,4-ethylene dioxythiophene) hole injection layer
resolves10.1007/s12274-015-0755-5
Stable high-performance hybrid perovskite solar cells with ultrathin polythiophene as hole-transporting layer
resolves10.1021/acs.jpclett.5b00902
C<sub>60</sub> as an Efficient n-Type Compact Layer in Perovskite Solar Cells
resolves10.1038/ncomms6784
Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells
resolves10.1038/ncomms8747
Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells
resolves10.1039/C5NR01864A
Efficient and stable planar heterojunction perovskite solar cells with an MoO
<sub>3</sub>
/PEDOT:PSS hole transporting layer
resolves10.1016/j.orgel.2015.06.046
High efficiency perovskite solar cells using a PCBM/ZnO double electron transport layer and a short air-aging step
resolves10.1039/C4TA01310G
Organo-metal halide perovskite-based solar cells with CuSCN as the inorganic hole selective contact
resolves10.1021/acs.nanolett.5b00116
CuSCN-Based Inverted Planar Perovskite Solar Cell with an Average PCE of 15.6%
resolves10.1002/smll.201501330
Solution-Processed Cu<sub>2</sub>O and CuO as Hole Transport Materials for Efficient Perovskite Solar Cells
resolves10.1002/aenm.201501406
Mechanically Recoverable and Highly Efficient Perovskite Solar Cells: Investigation of Intrinsic Flexibility of Organic–Inorganic Perovskite
resolves10.1021/acsami.5b03171
Transparent Conductive Oxide-Free Perovskite Solar Cells with PEDOT:PSS as Transparent Electrode
resolves10.1039/C5TA00084J
Fatigue resistance of a flexible, efficient, and metal oxide-free perovskite solar cell
resolves10.1021/acs.nanolett.5b02490
Single-Walled Carbon Nanotube Film as Electrode in Indium-Free Planar Heterojunction Perovskite Solar Cells: Investigation of Electron-Blocking Layers and Dopants
resolves10.1039/C5RA23430A
An efficient titanium foil based perovskite solar cell: using a titanium dioxide nanowire array anode and transparent poly(3,4-ethylenedioxythiophene) electrode
resolves10.1039/C5TA01755F
Highly efficient, flexible, indium-free perovskite solar cells employing metallic substrates
resolves10.1016/j.nanoen.2014.11.042
TiO2 nanotube arrays based flexible perovskite solar cells with transparent carbon nanotube electrode
resolves10.1002/cssc.201501332
Silver Nanowire Top Electrodes in Flexible Perovskite Solar Cells using Titanium Metal as Substrate
resolves10.1039/C4TA06011C
Flexible organo-metal halide perovskite solar cells on a Ti metal substrate
resolves10.1039/C5TA01532D
Radically grown obelisk-like ZnO arrays for perovskite solar cell fibers and fabrics through a mild solution process
resolves10.1002/adma.201403939
A Transparent Conductive Adhesive Laminate Electrode for High‐Efficiency Organic‐Inorganic Lead Halide Perovskite Solar Cells
resolves10.1021/acs.chemmater.5b01933
High-Performance, Air-Stable, Low-Temperature Processed Semitransparent Perovskite Solar Cells Enabled by Atomic Layer Deposition
resolves10.1021/jp102299g
Dye-Sensitized Solar Cell Constructed with Titanium Mesh and 3-D Array of TiO<sub>2</sub> Nanotubes
resolves10.1002/adma.200700134
Nanoimprinted Semitransparent Metal Electrodes and Their Application in Organic Light‐Emitting Diodes
resolves10.1109/JPHOTOV.2015.2416913
Laser-Scribing Patterning for the Production of Organometallic Halide Perovskite Solar Modules
resolves10.1002/celc.201500389
Laser Processing in the Manufacture of Dye‐Sensitized and Perovskite Solar Cell Technologies
resolves10.1039/c3cp55313b
Solid-state solar modules based on mesoscopic organometal halide perovskite: a route towards the up-scaling process
resolves10.1039/C4EE01216J
Benefits of very thin PCBM and LiF layers for solution-processed p–i–n perovskite solar cells
resolves10.1039/C5EE00120J
Hysteresis-less inverted CH
<sub>3</sub>
NH
<sub>3</sub>
PbI
<sub>3</sub>
planar perovskite hybrid solar cells with 18.1% power conversion efficiency
resolves10.1002/aenm.201401539
3D Printer Based Slot‐Die Coater as a Lab‐to‐Fab Translation Tool for Solution‐Processed Solar Cells
resolves10.1016/j.solmat.2008.10.004
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
resolves10.1039/b9nr00430k
Upscaling of polymer solar cell fabrication using full roll-to-roll processing
resolves10.1039/C4EE01546K
Efficient planar heterojunction mixed-halide perovskite solar cells deposited via spray-deposition
resolves10.1039/C4NR02065K
Controlling the surface nanostructure of ZnO and Al-doped ZnO thin films using electrostatic spraying for their application in 12% efficient perovskite solar cells
resolves10.1002/anie.201408638
Inkjet Printing and Instant Chemical Transformation of a CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub>/Nanocarbon Electrode and Interface for Planar Perovskite Solar Cells
resolves10.1016/j.jpowsour.2015.08.010
A simple approach for the fabrication of perovskite solar cells in air
resolves10.1088/0957-4484/26/49/494002
Solid state perovskite solar modules by vacuum-vapor assisted sequential deposition on Nd:YVO<sub>4</sub> laser patterned rutile TiO<sub>2</sub> nanorods
resolves10.1039/c0jm01178a
Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing
resolves10.1016/j.solmat.2008.12.012
Polymer solar cell modules prepared using roll-to-roll methods: Knife-over-edge coating, slot-die coating and screen printing
resolves10.1016/j.solmat.2010.10.013
Gravure printing for three subsequent solar cell layers of inverted structures on flexible substrates
resolves10.1002/aenm.201501407
Procedures and Practices for Evaluating Thin‐Film Solar Cell Stability
resolves10.1016/j.jpowsour.2015.02.084
Role of morphology and crystallinity of nanorod and planar electron transport layers on the performance and long term durability of perovskite solar cells
resolves10.1021/acsnano.5b03265
Vertical TiO<sub>2</sub> Nanorods as a Medium for Stable and High-Efficiency Perovskite Solar Modules
resolves10.1039/C6CP03600G
Humidity versus photo-stability of metal halide perovskite films in a polymer matrix
resolves10.1002/aenm.201500279
Revealing Underlying Processes Involved in Light Soaking Effects and Hysteresis Phenomena in Perovskite Solar Cells
resolves10.1021/acs.jpclett.5b00480
Capacitive Dark Currents, Hysteresis, and Electrode Polarization in Lead Halide Perovskite Solar Cells
resolves10.1021/jz5011187
Slow Dynamic Processes in Lead Halide Perovskite Solar Cells. Characteristic Times and Hysteresis
resolves10.1002/ente.201600244
A Systematic Investigation of Permeation Barriers for Flexible Dye‐Sensitized Solar Cells
resolves10.1021/jacs.5b00321
Hybrid Halide Perovskite Solar Cell Precursors: Colloidal Chemistry and Coordination Engineering behind Device Processing for High Efficiency
resolves10.1016/j.solener.2009.02.003
Estimating the manufacturing cost of purely organic solar cells
resolves10.1002/aenm.201501119
Tin‐ and Lead‐Based Perovskite Solar Cells under Scrutiny: An Environmental Perspective
resolves10.1016/j.solmat.2015.02.013
Solution and vapour deposited lead perovskite solar cells: Ecotoxicity from a life cycle assessment perspective
resolves10.1038/nphoton.2014.82
Lead-free solid-state organic–inorganic halide perovskite solar cells
The 25 references without a DOI — listed, not checked
no DOI — not checkedR.
Smalley
, Energy & NanoTechnology Conference, Rice University, 2003
no DOI — not checkedI. E. Agency, IEA: Solar PVs, http://www.iea.org/topics/solarpvandcsp/, accessed 12-12-2013, 2013
no DOI — not checkedA.
Whiteman
, S.Elsayed, O. L.d’Ortigue, IRENA Renewable Energy Capacity Statistics, 2015, pp.1–44
no DOI — not checkedC6EE01137C-(cit6)/*[position()=1]
no DOI — not checkedP. REPORT, ed. I. Fraunhofer, ISE Fraunhofer, Germany, 2015, pp. 1–41
no DOI — not checkedpv-magazine
no DOI — not checkedWikipedia
no DOI — not checkedNREL, Best research cell efficiencies, 2015
no DOI — not checkedT. M. Robert Gehlhaar, Cesar Masse de la Huerta, Weiming Qiu, David Cheyns and Tom Aernouts, 2015, 3, http://spie.org/newsroom
no DOI — not checkedC6EE01137C-(cit29)/*[position()=1]
no DOI — not checkedOxford-PV, 2015
no DOI — not checkedB. M.
Kayes
, H.Nie, R.Twist, S. G.Spruytte, F.Reinhardt, I. C.Kizilyalli and G. S.Higashi, in Photovoltaic Specialists Conference (PVSC), 2011 37th IEEE, 2011, pp. 000004–000008
no DOI — not checkedB.
Yan
, G.Yue, J.Yang and S.Guha, in Active-Matrix Flatpanel Displays and Devices (AM-FPD), 2012 19th International Workshop on, 2012, pp. 67–70
no DOI — not checkedP.
Reinhard
, A.Chirila, F.Pianezzi, S.Nishiwaki, S.Buecheler and A. N.Tiwari, in Active-Matrix Flatpanel Displays and Devices (AM-FPD), 2013 Twentieth International Workshop on, 2013, pp. 79–82
no DOI — not checkedHeliatek, Personal communication and “Heliatek sets new Organic Photovoltaic world record efficiency of 13.2%”, http://www.heliatek.com/en/press/press-releases, accessed June 2016
no DOI — not checkedK. G.
Lim
, H. B.Kim, J.Jeong, H.Kim, J. Y.Kim and T. W.Lee, Advanced Materials, 2014, pp. 1–6
no DOI — not checkedC6EE01137C-(cit164)/*[position()=1]
no DOI — not checkedC6EE01137C-(cit182)/*[position()=1]
no DOI — not checkedAlibaba, plastic rolls for lamination and encapsulation, Accessed 15/3/2016, March 2016
no DOI — not checkedH. J.
Snaith
, MRS 2014 plenary talk-F14-Symposium X, http://www.youtube.com/watch?v=wJE8Q7Ndzaw, accessed on June 2016
no DOI — not checkedT.
Meyer
, M.Scott, A.Azam, D.Martineau, F.Oswald, S.Narbey, G.Laporte, R.Cisneros, G.Tregnano and A.Meyer, CleanTechDay 3rd Generation Photovoltaics, CSEM, Basel, 2009
no DOI — not checkedI. R. E. Agency, 2012
no DOI — not checkedF.
Di Giacomo
, V.Zardetto, G.Lucarelli, L.Cinà, A.Di Carlo, M.Creatore and T. M.Brown, Nano Energy, 2016, accepted
no DOI — not checkedG.
Lucarelli
, F.Di Giacomo, V.Zardetto, M.Creatore and T. M.Brown, Nano Res., 2016, under review
no DOI — not checkedDirective 2011/65/EU of the European Parliment, 2011
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-24 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1039/c6ee01137c"><img src="https://citestamp.com/citestamped/10.1039/c6ee01137c/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1039/c6ee01137c)