Reference health
The cutting performance of Al <sub>2</sub> O <sub>3</sub> and Si <sub>3</sub> N <sub>4</sub> ceramic cutting tools in the milling plywood
18/18 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
3 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 18 checked references that resolve
resolves10.15376/biores.11.1.1571-1584
Effect of Plasma Processing Rate on Poplar Veneer Surface and its Application in Plywood
resolves10.1163/016942410X549951
The Influence of FRW-1 Fire Retardant Treatment on the Bonding of Plywood
resolves10.1515/HF.2009.014
Cutting forces in wood machining – Basics and applications in industrial processes. A review COST Action E35 2004–2008: Wood machining – micromechanics and fracture
resolves10.15376/biores.9.3.3779-3791
Tool Wear and Machined Surface Roughness during Wood Flour/Polyethylene Composite Peripheral Up-milling using Cemented Tungsten Carbide Tools
resolves10.1016/S0263-4368(01)00059-2
The influence of a corrosive wood-cutting environment on the mechanical properties of hardmetal tools
resolves10.1111/ijac.12144
Medium Density Fiberboard Machining and Wear Behavior of Injection‐Molded Ceramic Composite Wood Cutting Tools
resolves10.4028/www.scientific.net/KEM.368-372.1062
Development of Ceramic Composites for Industrial Wood-Cutting Tools
resolves10.4028/www.scientific.net/AMR.764.65
Tribological Properties of Ceramics Tool Materials in Contact with Wood-Based Materials
resolves10.1007/s11249-007-9212-2
Tribological Behaviour of Sub-micron Cutting-ceramics in Contact with Wood-based Materials
resolves10.1111/j.1744-7402.2011.02690.x
Lifetime and Wear Behavior of Near Net Shaped
<scp>
<scp>
Si
<sub>3</sub>
N
<sub>4</sub>
/SiC
</scp>
</scp>
Wood Cutting Tools
resolves10.1007/s00170-013-5206-4
Effect of cutting speed on cutting forces and wear mechanisms in high-speed face milling of Inconel 718 with Sialon ceramic tools
resolves10.1007/s00170-017-0085-8
The effects of cutting parameters and tool geometry on cutting forces and tool wear in milling high-density fiberboard with ceramic cutting tools
resolves10.1007/s00170-014-6016-z
Investigation of the effect of machining parameters on the surface quality of machined brass (60/40) in CNC end milling—ANFIS modeling
resolves10.1007/s00170-009-2422-z
Effect of cutting atmosphere on dry machining performance with Al2O3/ZrB2/ZrO2 ceramic tool
resolves10.1016/j.ijmachtools.2012.05.008
Effect of cutting parameters in the surface residual stresses generated by turning in AISI 4340 steel
The 3 references without a DOI — listed, not checked
no DOI — not checkedCIT0007
no DOI — not checkedCIT0015
no DOI — not checkedCIT0020
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1080/17436753.2017.1368946"><img src="https://citestamp.com/citestamped/10.1080/17436753.2017.1368946/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1080/17436753.2017.1368946)