Reference health
Development of Experimental Techniques for Parameterization of Multi-scale Lithium-ion Battery Models
71/71 checkable references clean · checked 2026-08-03
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
10 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 71 checked references that resolve
resolves10.1016/j.egypro.2019.01.783
A Review of Lithium-Ion Battery for Electric Vehicle Applications and Beyond
resolves10.1038/nchem.2085
Towards greener and more sustainable batteries for electrical energy storage
resolves10.1016/j.ssi.2004.09.049
Modeling of lithium ion cells?A simple equivalent-circuit model approach
resolves10.3390/en4040582
Evaluation of Lithium-Ion Battery Equivalent Circuit Models for State of Charge Estimation by an Experimental Approach
resolves10.1016/j.jpowsour.2011.10.013
A comparative study of equivalent circuit models for Li-ion batteries
resolves10.1016/j.jpowsour.2016.05.014
Design and use of multisine signals for Li-ion battery equivalent circuit modelling. Part 2: Model estimation
resolves10.1149/1.2221597
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
resolves10.1149/1.1836921
Comparison of Modeling Predictions with Experimental Data from Plastic Lithium Ion Cells
resolves10.3390/batteries5030062
Parameterization and Validation of an Electrochemical Thermal Model of a Lithium-Ion Battery
resolves10.1149/2.0281914jes
Review and Performance Comparison of Mechanical-Chemical Degradation Models for Lithium-Ion Batteries
resolves10.1149/2.0321816jes
Full Cell Parameterization of a High-Power Lithium-Ion Battery for a Physico-Chemical Model: Part I. Physical and Electrochemical Parameters
resolves10.1016/j.jpowsour.2013.05.164
Coupled thermal–electrochemical modelling of uneven heat generation in lithium-ion battery packs
resolves10.1149/2.1211609jes
Review—Post-Mortem Analysis of Aged Lithium-Ion Batteries: Disassembly Methodology and Physico-Chemical Analysis Techniques
resolves10.1016/j.jpowsour.2013.11.080
Electrochemical characterization and post-mortem analysis of aged LiMn2O4–Li(Ni0.5Mn0.3Co0.2)O2/graphite lithium ion batteries. Part I: Cycle aging
resolves10.1039/c1jm10213c
The failure mechanism of nano-sized Si-based negative electrodes for lithium ion batteries
resolves10.3389/fenrg.2014.00056
Effect of Calendering on Electrode Wettability in Lithium-Ion Batteries
resolves10.1002/aenm.201200932
X‐Ray Tomography of Porous, Transition Metal Oxide Based Lithium Ion Battery Electrodes
resolves10.1016/j.elecom.2012.12.021
3D analysis of a LiCoO2–Li(Ni1/3Mn1/3Co1/3)O2 Li-ion battery positive electrode using x-ray nano-tomography
resolves10.1149/2.024210jes
Three Dimensional Simulation of Galvanostatic Discharge of LiCoO<sub>2</sub>Cathode Based on X-ray Nano-CT Images
resolves10.1149/2.033207jes
Quantitative Characterization of LiFePO<sub>4</sub>Cathodes Reconstructed by FIB/SEM Tomography
resolves10.1016/j.elecom.2012.11.006
FIB/SEM-based calculation of tortuosity in a porous LiCoO2 cathode for a Li-ion battery
resolves10.1021/acsaem.8b00501
Visualizing the Carbon Binder Phase of Battery Electrodes in Three Dimensions
resolves10.1016/j.actamat.2014.03.003
X-ray micro-computed tomography and tortuosity calculations of percolating pore networks
resolves10.1039/C8EE00001H
Single-particle measurements of electrochemical kinetics in NMC and NCA cathodes for Li-ion batteries
resolves10.3390/nano9020246
Recovery of Li(Ni0.33Mn0.33Co0.33)O2 from Lithium-Ion Battery Cathodes: Aspects of Degradation
resolves10.1016/S0378-7753(97)02575-5
Recent studies on the correlation between surface chemistry, morphology, three-dimensional structures and performance of Li and Li-C intercalation anodes in several important electrolyte systems
resolves10.1016/S0378-7753(00)00431-6
Review of selected electrode–solution interactions which determine the performance of Li and Li ion batteries
resolves10.1149/1.2220746
Potential and Current Distribution in Electrochemical Cells: Interpretation of the Half‐Cell Voltage Measurements as a Function of Reference‐Electrode Location
resolves10.3390/batteries5010012
Critical Review of the Use of Reference Electrodes in Li-Ion Batteries: A Diagnostic Perspective
resolves10.1149/1.2133112
Determination of the Kinetic Parameters of Mixed‐Conducting Electrodes and Application to the System Li3Sb
resolves10.1149/1.1393481
Kinetic Characterization of the Electrochemical Intercalation of Lithium Ions into Graphite Electrodes
resolves10.1016/j.electacta.2008.04.023
Electrochemical characterisation and modelling of the mass transport phenomena in LiPF6–EC–EMC electrolyte
resolves10.1016/j.est.2019.04.006
Reproducibility of Li-ion cell reassembling processes and their influence on coin cell aging
resolves10.1007/s12532-018-0139-4
CasADi: a software framework for nonlinear optimization and optimal control
resolves10.1016/j.jallcom.2010.07.148
Synthesis, structural and electrochemical properties of LiNi0.79Co0.1Mn0.1Cr0.01O2 via fast co-precipitation
resolves10.1021/acs.jpcc.8b01873
Volume Changes of Graphite Anodes Revisited: A Combined <i>Operando</i> X-ray Diffraction and <i>In Situ</i> Pressure Analysis Study
resolves10.1021/acs.chemmater.9b00140
Evolution of Structure and Lithium Dynamics in LiNi<sub>0.8</sub>Mn<sub>0.1</sub>Co<sub>0.1</sub>O<sub>2</sub> (NMC811) Cathodes during Electrochemical Cycling
resolves10.1149/2.1141607jes
Tortuosity Determination of Battery Electrodes and Separators by Impedance Spectroscopy
resolves10.1016/j.coche.2016.02.006
On the origin and application of the Bruggeman correlation for analysing transport phenomena in electrochemical systems
resolves10.3390/coatings9020092
Ultrathin Al2O3 Coating on LiNi0.8Co0.1Mn0.1O2 Cathode Material for Enhanced Cycleability at Extended Voltage Ranges
resolves10.1149/2.0131608jes
Characterization of Electronic and Ionic Transport in Li<sub>1-</sub><i><sub>x</sub></i>Ni<sub>0.33</sub>Mn<sub>0.33</sub>Co<sub>0.33</sub>O<sub>2</sub>(NMC<sub>333</sub>) and Li<sub>1-</sub><i><sub>x</sub></i>Ni<sub>0.50</sub>Mn<sub>0.20</sub>Co<sub>0.30</sub>O<sub>2</sub>(NMC<sub>523</sub>) as a Function of Li Content
resolves10.1016/j.electacta.2018.03.063
Three-dimensional conductive network formed by carbon nanotubes in aqueous processed NMC electrode
resolves10.1149/2.096205jes
Micro-Scale Modeling of Li-Ion Batteries: Parameterization and Validation
resolves10.1016/j.pecs.2019.01.001
A comparison of methodologies for the non-invasive characterisation of commercial Li-ion cells
resolves10.1016/j.jpowsour.2014.12.035
Battery state-of-charge estimation using approximate least squares
resolves10.1021/nl202764f
Suppression of Phase Separation in LiFePO<sub>4</sub> Nanoparticles During Battery Discharge
resolves10.1016/j.jpowsour.2019.227153
Investigation of hysteresis and relaxation behaviour in graphite and LiNi0.33Mn0.33Co0.33O2 electrodes
resolves10.1016/j.jpcs.2003.10.019
High potential positive materials for lithium-ion batteries: transition metal phosphates
resolves10.1149/2.0021707jes
Oxygen Release and Its Effect on the Cycling Stability of LiNi<sub>x</sub>Mn<sub>y</sub>Co<sub>z</sub>O<sub>2</sub>(NMC) Cathode Materials for Li-Ion Batteries
resolves10.1002/(SICI)1521-4095(199807)10:10<725::AID-ADMA725>3.0.CO;2-Z
Insertion Electrode Materials for Rechargeable Lithium Batteries
resolves10.3390/ma11020176
On the Ageing of High Energy Lithium-Ion Batteries—Comprehensive Electrochemical Diffusivity Studies of Harvested Nickel Manganese Cobalt Electrodes
resolves10.1016/j.jpowsour.2018.12.010
Systematic electrochemical characterizations of Si and SiO anodes for high-capacity Li-Ion batteries
resolves10.1039/C5EE01493J
High-performance silicon-based multicomponent battery anodes produced via synergistic coupling of multifunctional coating layers
resolves10.1149/2.048405jes
Parameter Sensitivity Analysis of Cylindrical LiFePO<sub>4</sub>Battery Performance Using Multi-Physics Modeling
resolves10.1016/j.jpowsour.2016.06.030
Parameter sensitivity analysis of a simplified electrochemical and thermal model for Li-ion batteries aging
resolves10.1149/2.0731814jes
Resolving the Discrepancy in Tortuosity Factor Estimation for Li-Ion Battery Electrodes through Micro-Macro Modeling and Experiment
resolves10.1007/s10008-013-2000-z
Physical, thermal, and electrochemical characterization of stretched polyethylene separators for application in lithium-ion batteries
The 10 references without a DOI — listed, not checked
no DOI — not checkedjesab9050bib17
no DOI — not checkedjesab9050bib18
no DOI — not checkedjesab9050bib27
no DOI — not checkedjesab9050bib46
no DOI — not checkedjesab9050bib51
no DOI — not checkedjesab9050bib53
no DOI — not checkedjesab9050bib57
no DOI — not checkedjesab9050bib60
no DOI — not checkedjesab9050bib68
no DOI — not checkedjesab9050bib80
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-08-03 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1149/1945-7111/ab9050"><img src="https://citestamp.com/citestamped/10.1149/1945-7111/ab9050/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1149/1945-7111/ab9050)