Reference health

Enhanced Electrochemical Properties of LiNi<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub> at Elevated Temperature by Simultaneous Structure and Interface Regulating

https://doi.org/10.1149/2.0331908jes
CiteStamped reference-health badge
72/72 checkable references clean · checked 2026-07-23

Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.

2 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.

The 72 checked references that resolve
resolves10.1149/2.0841613jes
Enhancement on the Cycling Stability of the Layered Ni-Rich Oxide Cathode by In-Situ Fabricating Nano-Thickness Cation-Mixing Layers
resolves10.1149/2.1051608jes
Evaluation of Electrolyte Oxidation Stability on Charged LiNi<sub>0.5</sub>Co<sub>0.2</sub>Mn<sub>0.3</sub>O<sub>2</sub>Cathode Surface through Potentiostatic Holds
resolves10.1016/j.electacta.2018.05.007
Facile synthesis of TiP2O7/C nanoparticles as a competitive anode for aqueous lithium ion batteries
resolves10.1021/acs.nanolett.5b00045
A New Coating Method for Alleviating Surface Degradation of LiNi<sub>0.6</sub>Co<sub>0.2</sub>Mn<sub>0.2</sub>O<sub>2</sub> Cathode Material: Nanoscale Surface Treatment of Primary Particles
resolves10.1016/j.jpowsour.2015.02.078
Surface-modified concentration-gradient Ni-rich layered oxide cathodes for high-energy lithium-ion batteries
resolves10.1016/j.jallcom.2016.02.119
Influence of Mg2+ doping on the structure and electrochemical performances of layered LiNi0.6Co0.2-Mn0.2Mg O2 cathode materials
resolves10.1021/acsami.8b06399
Accelerated Evolution of Surface Chemistry Determined by Temperature and Cycling History in Nickel-Rich Layered Cathode Materials
resolves10.1021/cm503833b
Activation Mechanism of LiNi<sub>0.80</sub>Co<sub>0.15</sub>Al<sub>0.05</sub>O<sub>2</sub>: Surface and Bulk Operando Electrochemical, Differential Electrochemical Mass Spectrometry, and X-ray Diffraction Analyses
resolves10.1016/j.jpowsour.2014.12.015
Thermal stability in the blended lithium manganese oxide – Lithium nickel cobalt manganese oxide cathode materials: An in situ time-resolved X-Ray diffraction and mass spectroscopy study
resolves10.1039/c3cp50567g
Encapsulation of LiNi0.5Co0.2Mn0.3O2 with a thin inorganic electrolyte film to reduce gas evolution in the application of lithium ion batteries
resolves10.1016/j.jallcom.2016.08.187
Effects of Li2SiO3 coating on the performance of LiNi0.5Co0.2Mn0.3O2 cathode material for lithium ion batteries
resolves10.1021/acs.chemmater.5b02016
Atomic-Resolution Visualization of Distinctive Chemical Mixing Behavior of Ni, Co, and Mn with Li in Layered Lithium Transition-Metal Oxide Cathode Materials
resolves10.1021/nl5022859
Development of Microstrain in Aged Lithium Transition Metal Oxides
resolves10.1038/s41467-018-04862-w
Coupling of electrochemically triggered thermal and mechanical effects to aggravate failure in a layered cathode
resolves10.1016/j.ijheatmasstransfer.2016.07.088
Thermal safety of lithium-ion batteries with various cathode materials: A numerical study
resolves10.1149/2.1021607jes
Communication—Preparation of Highly Monodisperse Ni-Rich Cathode Material for Lithium Ion Batteries
resolves10.1149/2.0161512jes
Aluminum Borate Coating on High-Voltage Cathodes for Li-Ion Batteries
resolves10.1149/2.0141510jes
Improvement of the Electrochemical Characteristics of Lithium and Manganese Rich Layered Cathode Materials: Effect of Surface Coating
resolves10.1002/aenm.201601417
Compositionally Graded Cathode Material with Long‐Term Cycling Stability for Electric Vehicles Application
resolves10.1016/j.jallcom.2012.01.004
Characterization of multiple metals (Cr, Mg) substituted LiNi0.8Co0.1Mn0.1O2 cathode materials for lithium ion battery
resolves10.1016/j.jpowsour.2015.09.016
Effect of titanium addition as nickel oxide formation inhibitor in nickel-rich cathode material for lithium-ion batteries
resolves10.1016/j.electacta.2015.06.099
Effects of fluorine doping on structure, surface chemistry, and electrochemical performance of LiNi0.8Co0.15Al0.05O2
resolves10.1002/aenm.201801202
Improved Cycling Stability of Li[Ni<sub>0.90</sub>Co<sub>0.05</sub>Mn<sub>0.05</sub>]O<sub>2</sub> Through Microstructure Modification by Boron Doping for Li‐Ion Batteries
resolves10.1016/j.jpowsour.2018.10.094
Structural, electrochemical and Li-ion transport properties of Zr-modified LiNi0.8Co0.1Mn0.1O2 positive electrode materials for Li-ion batteries
resolves10.1002/aenm.201801573
MnPO<sub>4</sub>‐Coated Li(Ni<sub>0.4</sub>Co<sub>0.2</sub>Mn<sub>0.4</sub>)O<sub>2</sub> for Lithium(‐Ion) Batteries with Outstanding Cycling Stability and Enhanced Lithiation Kinetics
resolves10.1021/acsami.6b09197
Alleviating Surface Degradation of Nickel-Rich Layered Oxide Cathode Material by Encapsulating with Nanoscale Li-Ions/Electrons Superionic Conductors Hybrid Membrane for Advanced Li-Ion Batteries
resolves10.1021/acsami.8b10016
Synergistic Effect of F<sup>–</sup> Doping and LiF Coating on Improving the High-Voltage Cycling Stability and Rate Capacity of LiNi<sub>0.5</sub>Co<sub>0.2</sub>Mn<sub>0.3</sub>O<sub>2</sub> Cathode Materials for Lithium-Ion Batteries
resolves10.1038/s41560-018-0191-3
Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries
resolves10.1002/aenm.201701682
From Surface ZrO<sub>2</sub> Coating to Bulk Zr Doping by High Temperature Annealing of Nickel‐Rich Lithiated Oxides and Their Enhanced Electrochemical Performance in Lithium Ion Batteries
resolves10.1038/nmat3435
Nanostructured high-energy cathode materials for advanced lithium batteries
resolves10.1016/j.jpowsour.2018.05.016
Corrigendum to “The effect of gradient boracic polyanion-doping on structure, morphology, and cycling performance of Ni-rich LiNi0.8Co0.15Al0.05O2 cathode material” [J. Power Sources 374 (2018) 1–11]
resolves10.1016/j.jpowsour.2016.09.081
Cycle deterioration analysis of 0.6 Ah-class lithium-ion cells with cell chemistry of LiNi0.6Co0.2Mn0.2O2-based/graphite
resolves10.1038/s41598-018-21345-6
Enhanced Electrochemical Properties of Zr4+-doped Li1.20[Mn0.52Ni0.20Co0.08]O2 Cathode Material for Lithium-ion Battery at Elevated Temperature
resolves10.1021/acsami.7b17597
Three-Dimensional Honeycomb-Structural LiAlO<sub>2</sub>-Modified LiMnPO<sub>4</sub> Composite with Superior High Rate Capability as Li-Ion Battery Cathodes
resolves10.1016/j.nanoen.2018.04.062
Designing principle for Ni-rich cathode materials with high energy density for practical applications
resolves10.1021/acsami.8b02000
Synthesis Method for Long Cycle Life Lithium-Ion Cathode Material: Nickel-Rich Core–Shell LiNi<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub>
resolves10.1016/j.electacta.2015.11.093
Role of zirconium dopant on the structure and high voltage electrochemical performances of LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathode materials for lithium ion batteries
resolves10.1016/j.jpowsour.2018.09.049
Manganese phosphate coated Li[Ni0.6Co0.2Mn0.2]O2 cathode material: Towards superior cycling stability at elevated temperature and high voltage
resolves10.1038/s41467-018-05802-4
Understanding voltage decay in lithium-excess layered cathode materials through oxygen-centred structural arrangement
resolves10.1016/j.jpowsour.2014.01.061
An approach to application for LiNi0.6Co0.2Mn0.2O2 cathode material at high cutoff voltage by TiO2 coating
resolves10.1016/j.ceramint.2017.02.062
Modeling the grain growth kinetics of doped nearly fully dense nanocrystalline ceramics
resolves10.1016/j.jpowsour.2016.12.095
A short process for the efficient utilization of transition-metal chlorides in lithium-ion batteries: A case of Ni0.8Co0.1Mn0.1O1.1 and LiNi0.8Co0.1Mn0.1O2
resolves10.1021/cm4006772
Cathode Material with Nanorod Structure—An Application for Advanced High-Energy and Safe Lithium Batteries
resolves10.1149/2.0101502jes
Improved Performances of Li[Ni<sub>0.65</sub>Co<sub>0.08</sub>Mn<sub>0.27</sub>]O<sub>2</sub>Cathode Material with Full Concentration Gradient for Li-Ion Batteries
resolves10.1039/C8TA10553G
Insights into Li/Ni ordering and surface reconstruction during synthesis of Ni-rich layered oxides
resolves10.1002/aenm.201801957
Extending the Service Life of High‐Ni Layered Oxides by Tuning the Electrode–Electrolyte Interphase
resolves10.1016/j.jpowsour.2016.01.079
Optimized structure stability and electrochemical performance of LiNi0.8Co0.15Al0.05O2 by sputtering nanoscale ZnO film
resolves10.1016/j.jpowsour.2013.01.045
Improvement of long-term cycling performance of Li[Ni0.8Co0.15Al0.05]O2 by AlF3 coating
resolves10.1002/aenm.201802057
Surface and Subsurface Reactions of Lithium Transition Metal Oxide Cathode Materials: An Overview of the Fundamental Origins and Remedying Approaches
resolves10.1021/cm0511769
X-ray/Neutron Diffraction and Electrochemical Studies of Lithium De/Re-Intercalation in Li<sub>1</sub><sub>-</sub><i><sub>x</sub></i>Co<sub>1/</sub><sub>3</sub>Ni<sub>1/3</sub>Mn<sub>1/3</sub>O<sub>2</sub> (<i>x</i> = 0 → 1)
resolves10.1038/s41560-018-0199-8
Stable cycling of high-voltage lithium metal batteries in ether electrolytes
resolves10.1038/s41586-018-0015-4
Reversible Mn2+/Mn4+ double redox in lithium-excess cathode materials
resolves10.1016/j.jpowsour.2015.10.051
Understanding the effects of a multi-functionalized additive on the cathode–electrolyte interfacial stability of Ni-rich materials
resolves10.1038/s41560-018-0207-z
Evolution of redox couples in Li- and Mn-rich cathode materials and mitigation of voltage fade by reducing oxygen release
resolves10.1021/acsami.8b05648
High-Performance and Industrially Feasible Ni-Rich Layered Cathode Materials by Integrating Coherent Interphase
resolves10.1126/science.aas9343
A high-energy-density lithium-oxygen battery based on a reversible four-electron conversion to lithium oxide
resolves10.1149/2.0051502jes
High-Temperature Cycling Performance of LiNi<sub>1/3</sub>Co<sub>1/3</sub>Mn<sub>1/3</sub>O<sub>2</sub>Cathode with DLC Protective Film
resolves10.1016/j.jpowsour.2018.07.043
Differential voltage curve analysis of a lithium-ion battery during discharge
resolves10.1149/2.0751813jes
Suppression of Voltage Decay and Improvement in Electrochemical Performance by Zirconium Doping in Li-Rich Cathode Materials for Li-Ion Batteries
resolves10.1002/aenm.201702383
MoS<sub>2</sub>/Graphene Nanosheets from Commercial Bulky MoS<sub>2</sub> and Graphite as Anode Materials for High Rate Sodium‐Ion Batteries
resolves10.1016/j.electacta.2018.05.096
N-doped carbon coated LiTi2(PO4)3 as superior anode using PANi as carbon and nitrogen bi-sources for aqueous lithium ion battery
resolves10.1016/j.electacta.2018.09.024
Size controlling and surface engineering enable NaTi2(PO4)3/C outstanding sodium storage properties
resolves10.1016/j.jpowsour.2016.09.051
Oxygen vacancies in SnO2 surface coating to enhance the activation of layered Li-Rich Li1.2Mn0.54Ni0.13Co0.13O2 cathode material for Li-ion batteries
resolves10.1016/j.jpowsour.2015.02.095
Correlation of oxygen non-stoichiometry to the instabilities and electrochemical performance of LiNi 0.8 Co 0.1 Mn 0.1 O 2 utilized in lithium ion battery
resolves10.1039/C8CC08916G
Visualization of inhomogeneous current distribution on ZrO <sub>2</sub> -coated LiCoO <sub>2</sub> thin-film electrodes using scanning electrochemical cell microscopy
resolves10.1016/j.jpowsour.2006.03.092
Enhanced electrochemical properties of LiNi1/3Co1/3Mn1/3O2 cathode material by coating with LiAlO2 nanoparticles
resolves10.1002/aenm.201200370
Unexpected Improved Performance of ALD Coated LiCoO<sub>2</sub>/Graphite Li‐Ion Batteries
resolves10.1016/j.electacta.2015.06.112
Al2O3 Coated Concentration-Gradient Li[Ni0.73Co0.12Mn0.15]O2 Cathode Material by Freeze Drying for Long-Life Lithium Ion Batteries
resolves10.1021/acsami.8b13766
Facile Mn Surface Doping of Ni-Rich Layered Cathode Materials for Lithium Ion Batteries
resolves10.1016/j.jallcom.2014.05.068
Improve the structure and electrochemical performance of LiNi0.6Co0.2Mn0.2O2 cathode material by nano-Al2O3 ultrasonic coating
resolves10.1021/acs.chemmater.8b01958
Solid–Liquid Interfacial Reaction Trigged Propagation of Phase Transition from Surface into Bulk Lattice of Ni-Rich Layered Cathode
resolves10.1021/jacs.8b06150
Cationic Ordering Coupled to Reconstruction of Basic Building Units during Synthesis of High-Ni Layered Oxides
The 2 references without a DOI — listed, not checked
no DOI — not checked2019042915550873000_166.8.A1439.4
no DOI — not checked2019042915550873000_166.8.A1439.73
What this badge says. CiteStamped means the CHECKABLE references of this work were clean at the dated check: each resolved to a known work in a public registry, and none carried a retraction notice at that time. It says nothing about the quality, findings, or importance of the work itself, and nothing about references deposited without a DOI.

checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record

view as graph · paper page

Embed this badge

Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.

<a href="https://citestamp.com/citestamped/10.1149/2.0331908jes"><img src="https://citestamp.com/citestamped/10.1149/2.0331908jes/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[![CiteStamped reference-health badge](https://citestamp.com/citestamped/10.1149/2.0331908jes/badge.svg)](https://citestamp.com/citestamped/10.1149/2.0331908jes)