Reference health
Large-eddy simulation analysis of the influence of the needle lift on the cavitation in diesel injector nozzles
39/39 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
15 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 39 checked references that resolve
resolves10.1021/ef900068a
Effect of Bioethanol−Biodiesel Blending Ratio on Fuel Spray Behavior and Atomization Characteristics
resolves10.1016/j.fuel.2004.10.009
Using spray momentum flux measurements to understand the influence of diesel nozzle geometry on spray characteristics
resolves10.1016/j.ijheatfluidflow.2008.03.014
Effect of cavitation in nozzle orifice on the diesel fuel atomization characteristics
resolves10.1016/j.applthermaleng.2008.10.009
Effects of nozzle geometry on direct injection diesel engine combustion process
resolves10.1021/ef9004847
Mixing Stability and Spray Behavior Characteristics of Diesel−Ethanol−Methyl Ester Blended Fuels in a Common-Rail Diesel Injection System
resolves10.1016/j.fuel.2005.10.023
Development and validation of a theoretical model for diesel spray penetration
resolves10.1016/j.fuel.2006.10.011
A contribution to the understanding of isothermal diesel spray dynamics
resolves10.1016/S0142-727X(99)00043-0
Investigation of cavitation in real size diesel injection nozzles
resolves10.4271/2005-01-2098
Validation of Diesel Fuel Spray and Mixture Formation from Nozzle Internal Flow Calculation
resolves10.1115/1.3203146
Investigation of Nozzle Flow and Cavitation Characteristics in a Diesel Injector
resolves10.1615/AtomizSpr.v13.i56.80
A CFD ANALYSIS OF THE INFLUENCE OF DIESEL NOZZLE GEOMETRY ON THE INCEPTION OF CAVITATION
resolves10.4271/2007-01-0245
Evaluation of the Predictive Capability of Diesel Nozzle Cavitation Models
resolves10.1016/0021-9991(92)90307-K
A front-tracking method for viscous, incompressible, multi-fluid flows
resolves10.4271/2008-01-0137
LES Simulation of the Internal Flow and Near-Field Spray Structure of an Outward-Opening GDi Injector and Comparison with Imaging Data
resolves10.4271/2000-01-2932
A Validated Numerical Simulation of Diesel Injector Flow Using a VOF Method
resolves10.1016/S0142-727X(03)00003-1
Thermodynamic modeling and simulation of cavitating nozzle flow
resolves10.1016/j.ijheatfluidflow.2011.05.010
Numerical simulation of wall roughness effects in cavitating flow
resolves10.1016/j.mcm.2010.02.027
Validation of a code for modeling cavitation phenomena in Diesel injector nozzles
resolves10.1177/09544070JAUTO1569
Numerical simulation and extended validation of two-phase compressible flow in diesel injector nozzles
resolves10.1016/j.compfluid.2012.01.005
A contribution to the understanding of cavitation effects in Diesel injector nozzles through a combined experimental and computational investigation
resolves10.1016/j.enconman.2012.10.011
Study of the influence of the needle lift on the internal flow and cavitation phenomenon in diesel injector nozzles by CFD using RANS methods
resolves10.1016/j.mcm.2011.10.050
Computational study of the cavitation phenomenon and its interaction with the turbulence developed in diesel injector nozzles by Large Eddy Simulation (LES)
resolves10.1016/j.fuel.2003.09.010
The influence of cavitation on the internal flow and the spray characteristics in diesel injection nozzles
resolves10.1016/j.ijheatfluidflow.2009.03.011
Study of cavitation phenomena based on a technique for visualizing bubbles in a liquid pressurized chamber
resolves10.4995/Thesis/10251/29291
Estudio computacional de la influencia del levantamiento de aguja sobre el flujo interno y el fenómeno de la cavitación en toberas de inyección diésel
resolves10.1016/j.mcm.2011.11.019
Study of the influence of the inlet boundary conditions in a LES simulation of internal flow in a diesel injector
resolves10.1243/14680874JER00806
Effect of piezo-driven and solenoid-driven needle opening of common-rail diesel injectors on internal nozzle flow and spray development
resolves10.1016/j.fuel.2010.06.004
Influence of cavitation phenomenon on primary break-up and spray behavior at stationary conditions
The 15 references without a DOI — listed, not checked
no DOI — not checked3rd ASME/JSME joint fluids engineering conference
no DOI — not checkedMiranda R, Chaves H, Martin U, Obermeier F. Cavitation in a transparent real size VCO injection nozzle, Proceedings of the 9th international conference on liquid atomization and spray systems, Sorrento, Italy, 13–17 July, 2003. Paper ICLASS03-12-6. ILASS Europe, Sorrento, Italy. Found at: http://ilasseurope.org/events/9th-iclass-conference/.
no DOI — not checkedAVL-FIRE user manual, v. 8.4.2
no DOI — not checkedSoriano O, Sommerfeld M, Burkhardt A. Validation of a cavitation and turbulence induced model for the primary breakup of diesel jets. In: 22nd European conference on liquid atomization and spray systems, Como Lake, Italy, 8–10 September 2008, paper ILASS08-1-13. ILASS – Europe. Found at: http://www.ilasseurope.org/ICLASS/ILASS2008_COMO/index.html.
no DOI — not checkedANSYS CFX-solver theory guide
no DOI — not checkedFluent v.5.0 user’s guide
no DOI — not checked7th annual conference of the Computational Fluid Dynamics Society of Canada
no DOI — not checkedASME Fluid Engineering Division summer meeting
no DOI — not checkedModelisation des jets d’injection haute pression des moteurs diesel et validation experimentale
no DOI — not checkedThird International Conference on Multiphase Flow - ICMF’98, CD-ROM Proceedings - Third International Conference on Multiphase Flow - ICMF’98 Lyon
no DOI — not checkedASME cavitation and multiphase flow forum
no DOI — not checkedPlesset M, Devine R. Effect of exposure time on cavitation damage. Report (Office of Naval Research Contract Nonr-220(28)), California Institute of Technology, Pasadena, California, USA, 1965.
no DOI — not checkedASME/JSME 2007 5th joint fluids engineering conference
no DOI — not checkedOpenCFD Limited. OpenFOAM®, OpenFOAM, http://www.openfoam.com/, 2004–2014.
no DOI — not checkedde Villiers E. The potential of large eddy simulation for the modeling of wall bounded flows. PhD Thesis, Imperial College of Science, Technology and Medicine, London, UK, 2006.
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1177/0954407014542627"><img src="https://citestamp.com/citestamped/10.1177/0954407014542627/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1177/0954407014542627)