Reference health
Microstructure and characterizations of one-step forming TiC/Ni<sub>3</sub>Al–Ni<sub>3</sub>Al multicoating on 316L stainless steel
34/34 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
The 34 checked references that resolve
resolves10.1016/j.wear.2010.02.013
Abrasive wear behavior of detonation sprayed WC–12Co coatings: Influence of decarburization and abrasive characteristics
resolves10.1016/S1003-6326(11)61031-5
Tribological properties of Ni-base alloy composite coating modified by both graphite and TiC particles
resolves10.1016/S1006-706X(06)60092-7
Development of New Wear-Resistant Surface Coating at Elevated Temperature
resolves10.1016/j.compositesb.2013.05.032
Effects of temperature and normal load on tribological behavior of nickel-based high temperature self-lubricating wear-resistant composite coating
resolves10.1016/j.msea.2003.09.104
Microstructure and wear resistance of a laser clad TiC reinforced nickel aluminides matrix composite coating
resolves10.1016/j.wear.2007.01.132
Microstructure and phase transformation of WC/Ni60B laser cladding coatings during dry sliding wear
resolves10.1016/j.surfcoat.2013.10.071
Microstructures and properties of NiAl–TiC nanocomposite coatings on carbon steel surfaces produced by mechanical alloying technique
resolves10.1016/j.wear.2013.04.012
Influence of nanostructured ZrO2 additions on the wear resistance of Ni-based alloy coatings deposited by APS process
resolves10.1016/j.surfcoat.2006.09.106
Microstructure and abrasive wear performance of chromium carbide reinforced Ni3Al matrix composite coating
resolves10.1016/S0921-5093(97)00501-7
Gradient microstructure in laser clad TiC-reinforced Ni-alloy composite coating
resolves10.1016/S0921-5093(01)01394-6
Microstructure and mechanical properties at TiCp/Ni-alloy interfaces in laser-synthesized coatings
resolves10.1016/j.matlet.2006.09.061
TiC/Ni3Al coating on steel via combustion synthesis during casting
resolves10.1016/j.matdes.2008.12.013
A thermal explosion process to fabricate an intermetallic matrix composite coating on a steel
resolves10.1016/j.matlet.2009.08.033
Interface microstructure of diffusion bonded Ni3Al intermetallic alloy and austenitic stainless steel
resolves10.1016/j.jmatprotec.2005.07.009
Synthesis and cladding of Ni3Al intermetallic on steel substrate by laser controlled reactive synthesis
resolves10.1016/j.intermet.2009.12.020
Preparation, microstructure and tribological properties of Ni3Al intermetallic compound coating by laser cladding
resolves10.1016/S0257-8972(98)00820-2
A study of Ni3Al coating on carbon steel surface via the SHS casting route
resolves10.1016/j.surfcoat.2004.03.030
Some studies on hot corrosion performance of plasma sprayed coatings on a Fe-based superalloy
resolves10.1016/j.dt.2013.12.009
Influence of yttrium on microstructure and properties of Ni–Al alloy coatings prepared by laser cladding
resolves10.1016/j.surfcoat.2011.03.007
Study on salt spray corrosion of Ni–graphite abradable coating with 80Ni20Al and 96NiCr–4Al as bonding layers
resolves10.1016/j.wear.2010.10.060
Tribological evaluation on Ni3Al-based alloy and its composites under unlubricated wear condition
resolves10.1016/S1006-706X(08)60045-X
Ni3Al-Based Intermetallic Alloys as a New Type of High-Temperature and Wear-Resistant Materials
resolves10.1016/j.intermet.2007.07.003
The oxidation of nanocrystalline Ni3Al fabricated by mechanical alloying and spark plasma sintering
resolves10.1016/j.corsci.2006.10.010
Hot corrosion behaviour of Ni3Al in sulphate–chloride mixtures in the atmosphere
resolves10.1016/j.cej.2007.11.034
Study of TiC/Ni3Al composites by laser ignited self-propagating high-temperature synthesis (LISHS)
resolves10.1016/j.matchar.2012.04.013
Solidification observations and sliding wear behavior of vacuum arc melting processed Ni–Al–TiC composites
resolves10.1016/j.jallcom.2004.08.066
Laser melted TiC reinforced nickel aluminide matrix in situ composites
resolves10.1016/j.wear.2013.03.034
Tribological performance of Ni3Al–15wt% Ti3SiC2 composites against Al2O3, Si3N4 and WC-6Co from 25 to 800°C
resolves10.1016/j.msea.2010.02.061
Microstructure and mechanical behaviors of in situ TiC particulates reinforced Ni matrix composites
resolves10.1016/S0966-9795(99)00095-3
Fracture mechanism of Ni3Al alloys and their composites with ceramic particles at elevated temperatures
resolves10.1016/S1003-6326(11)61255-7
WC–Ni3Al–B composites prepared through Ni+Al elemental powder route
resolves10.1016/j.wear.2008.04.038
Wear of Ni3Al-based materials and its chromium-carbide reinforced composites
resolves10.1002/maco.200704072
Hot corrosion of a plasma sprayed Ni<sub>3</sub>Al coating on a Ni‐base superalloy
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.1179/1743290115y.0000000021"><img src="https://citestamp.com/citestamped/10.1179/1743290115y.0000000021/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.1179/1743290115y.0000000021)