Reference health
Perovskite Solar Cells on Sn-Doped In2o3 Electrodes with Artificially Controlled (222) Preferred Orientation
36/36 checkable references clean · checked 2026-09-02
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
20 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 36 checked references that resolve
resolves10.1038/s41578-019-0151-y
Minimizing non-radiative recombination losses in perovskite solar cells
resolves10.1021/ja809598r
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
resolves10.1016/j.solmat.2019.03.004
Highly stable semi-transparent MAPbI3 perovskite solar cells with operational output for 4000 h
resolves10.1038/s41560-018-0324-8
Planar p–n homojunction perovskite solar cells with efficiency exceeding 21.3%
resolves10.1021/acsenergylett.9b00847
Single-Crystal MAPbI3 Perovskite Solar
Cells Exceeding 21% Power Conversion Efficiency
resolves10.1016/j.nanoen.2021.106387
Ambient-air fabrication of stable mixed cation perovskite planar solar cells with efficiencies exceeding 22% using a synergistic mixed antisolvent with complementary properties
resolves10.1038/s41560-019-0538-4
Managing grains and interfaces via ligand anchoring enables 22.3%-efficiency inverted perovskite solar cells
resolves10.1021/acsami.0c06211
Controlling the Morphology and Interface of the Perovskite Layer for Scalable High-Efficiency Solar Cells Fabricated Using Green Solvents and Blade Coating in an Ambient Environment
resolves10.1039/C6TA08783C
Interface engineering in planar perovskite solar cells: energy level alignment, perovskite morphology control and high performance achievement
resolves10.1021/jacs.5b10614
Multifunctional Fullerene Derivative for Interface Engineering in Perovskite Solar Cells
resolves10.1039/C8TA09838G
Achievable high
<i>V</i>
<sub>oc</sub>
of carbon based all-inorganic CsPbIBr
<sub>2</sub>
perovskite solar cells through interface engineering
resolves10.1039/C8TA08287A
Promising ITO-free perovskite solar cells with WO
<sub>3</sub>
–Ag–SnO
<sub>2</sub>
as transparent conductive oxide
resolves10.1016/j.cej.2017.04.097
Highly efficient CH3NH3PbI3 perovskite solar cells prepared by AuCl3-doped graphene transparent conducting electrodes
resolves10.1016/j.solmat.2018.05.048
Fully solution processed semi-transparent perovskite solar cells with spray-coated silver nanowires/ZnO composite top electrode
resolves10.1016/j.solmat.2018.10.009
Fabrication of high-performance F and Al co-doped ZnO transparent conductive films for use in perovskite solar cells
resolves10.1021/acsami.5b03171
Transparent Conductive Oxide-Free Perovskite Solar Cells with PEDOT:PSS as Transparent Electrode
resolves10.1002/adfm.201901741
Zr‐Doped Indium Oxide (IZRO) Transparent Electrodes for Perovskite‐Based Tandem Solar Cells
resolves10.1021/acsnano.0c03265
High-Mobility In
<sub>2</sub>
O
<sub>3</sub>
:H Electrodes for Four-Terminal Perovskite/CuInSe
<sub>2</sub>
Tandem Solar Cells
resolves10.1016/j.solener.2019.12.040
Cerium-doped indium oxide transparent electrode for semi-transparent perovskite and perovskite/silicon tandem solar cells
resolves10.1016/0040-6090(94)06390-7
Origin of characteristic grain-subgrain structure of tin-doped indium oxide films
resolves10.1016/j.tsf.2005.12.273
Polycrystalline growth and recrystallization processes in sputtered ITO thin films
resolves10.1016/j.rinp.2019.102159
The effect of post annealing temperature on grain size of indium-tin-oxide for optical and electrical properties improvement
resolves10.1016/j.apsusc.2018.01.318
The effects of film thickness on the electrical, optical, and structural properties of cylindrical, rotating, magnetron-sputtered ITO films
resolves10.1007/s10832-007-9351-8
Effects of oxygen partial pressure on the preferential orientation and surface morphology of ITO films grown by RF magnetron sputtering
resolves10.1016/j.jcrysgro.2003.07.006
Development of indium tin oxide film texture during DC magnetron sputtering deposition
resolves10.1016/S0042-207X(96)00309-0
Studies on the preferred orientation changes and its influenced properties on ITO thin films
resolves10.1039/C5EE03229F
Intermixing-seeded growth for high-performance planar heterojunction perovskite solar cells assisted by precursor-capped nanoparticles
resolves10.1016/j.ssc.2003.11.044
A spectroscopic ellipsometry study on the variation of the optical constants of tin-doped indium oxide thin films during crystallization
resolves10.1039/C8NR08344D
Controlled crystal facet of MAPbI
<sub>3</sub>
perovskite for highly efficient and stable solar cell
<i>via</i>
nucleation modulation
resolves10.1039/C7EE02415K
Interpretation and evolution of open-circuit voltage, recombination, ideality factor and subgap defect states during reversible light-soaking and irreversible degradation of perovskite solar cells
resolves10.1149/1.3055339
Reduction of Series Resistance in Organic Photovoltaic Using Low Sheet Resistance of ITO Electrode
The 20 references without a DOI — listed, not checked
no DOI — not checkedProgress of surface science studies on ABX 3 -based metal halide perovskite solar cells
no DOI — not checkedA review on additives for halide perovskite solar cells
no DOI — not checkedMethylammonium chloride as an interface modificator for planar-structure perovskite solar cells with a high open circuit voltage of 1.19V
no DOI — not checkedref9
no DOI — not checkedNovel inorganic electron transport layers for planar perovskite solar cells: progress and prospective
no DOI — not checkedRoll-to-roll gravure-printed flexible perovskite solar cells using eco-friendly antisolvent bathing with wide processing window
no DOI — not checkedref13
no DOI — not checkedA review on scaling up perovskite solar cells
no DOI — not checkedInterface engineering for highly efficient and stable planar p-i-n perovskite solar cells
no DOI — not checkedMetal oxide charge transport layers for efficient and stable perovskite solar cells
no DOI — not checkedAchieving high-performance perovskite photovoltaic by morphology engineering of low-temperature processed Zn-doped TiO 2 electron transport layer
no DOI — not checkedInterface engineering for all-inorganic CsPbI 2 Br perovskite solar cells with efficiency over 14%
no DOI — not checkedCompositional and interface engineering of organic-inorganic lead halide perovskite solar cells
no DOI — not checkedAll-solution-processed silver nanowire window electrode-based flexible perovskite solar cells enabled with amorphous metal oxide protection
no DOI — not checkedResearch direction toward scalable, stable, and high efficiency perovskite solar cells
no DOI — not checkedITO and electron transport layer-free planar perovskite solar cells on transparent Nb-doped anatase TiO 2-x electrode
no DOI — not checkedRole of annealing temperature on microstructural and electro-optical properties of ITO films produced by sputtering
no DOI — not checkedref48
no DOI — not checkedUltra-high opencircuit voltage of perovskite solar cells induced by nucleation thermodynamics on rough substrates
no DOI — not checkedHighly efficient all-inorganic perovskite solar cells with suppressed nonradiative recombination by a Lewis base
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-09-02 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.2139/ssrn.4073394"><img src="https://citestamp.com/citestamped/10.2139/ssrn.4073394/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.2139/ssrn.4073394)