Reference health
Achieving Strength-Ductility Synergy in Nanotwinned Femnsic Twip Steels Prepared by Cryogenic Deformation at the Optimum Temperature
54/54 checkable references clean · checked 2026-09-10
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
18 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 54 checked references that resolve
resolves10.1126/science.1159610
Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale
resolves10.1016/j.actamat.2012.03.035
Strengthening an austenitic Fe–Mn steel using nanotwinned austenitic grains
resolves10.1016/j.msea.2018.08.079
Ultra-high tensile strength nanocrystalline CoCrNi equi-atomic medium entropy alloy processed by high-pressure torsion
resolves10.1016/j.actamat.2016.03.057
Evolution of dislocations and twins in a strong and ductile nanotwinned steel
resolves10.1016/j.actamat.2018.02.065
Fracture behavior of heterogeneous nanostructured 316L austenitic stainless steel with nanotwin bundles
resolves10.1016/j.actamat.2007.09.020
Microstructural evolution and nanostructure formation in copper during dynamic plastic deformation at cryogenic temperatures
resolves10.1016/j.pnsc.2014.01.004
Supper strong nanostructured TWIP steels for automotive applications
resolves10.1016/j.actamat.2017.11.023
Tensile properties and deformation mode of Si-added Fe-18Mn-0.6C steels
resolves10.1016/j.jallcom.2019.04.307
EBSD analysis of dual γ/ε phase microstructures in tensile-deformed Fe-Mn-Si shape memory alloy
resolves10.1016/j.actamat.2012.11.041
Strain-induced martensitic transformation near twin boundaries in a biomedical Co–Cr–Mo alloy with negative stacking fault energy
resolves10.1038/ncomms10602
Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures
resolves10.1016/j.jmst.2018.12.002
Superb cryogenic strength of equiatomic CrCoNi derived from gradient hierarchical microstructure
resolves10.1016/j.scriptamat.2019.01.016
Superior cryogenic tensile properties of ultrafine-grained CoCrNi medium-entropy alloy produced by high-pressure torsion and annealing
resolves10.1016/j.msea.2020.139591
Heavily twinned CoCrNi medium-entropy alloy with superior strength and crack resistance
resolves10.1016/j.msea.2016.08.106
Stacking fault energy and deformation mechanisms in Fe-xMn-0.6C-yAl TWIP steel
resolves10.1016/j.actamat.2015.08.030
The influence of stacking fault energy on the microstructural and strain-hardening evolution of Fe–Mn–Al–Si steels during tensile deformation
resolves10.1016/j.actamat.2013.02.031
The effects of Si on the mechanical twinning and strain hardening of Fe–18Mn–0.6C twinning-induced plasticity steel
resolves10.1016/j.actamat.2017.04.046
Simultaneous twinning nucleation mechanisms in an Fe–Mn–Si–Al twinning induced plasticity steel
resolves10.1016/j.scriptamat.2017.04.037
Effect of stacking faults on the ductility of Fe-18Mn-1.5Al-0.6C twinning-induced plasticity steel at low temperatures
resolves10.1080/02670836.2020.1780002
Remarkable improvement of damping capacity in FeMn-based alloys by a long annealing
resolves10.1007/s11661-007-9434-9
Effect of Nitrogen on Stacking Fault Formation Probability and Mechanical Properties of Twinning-Induced Plasticity Steels
resolves10.1016/j.msea.2012.11.025
Severe plastic deformation of 6061 aluminum alloy tube with pre and post heat treatments
resolves10.1016/0956-7151(92)90054-I
A study of work hardening in austenitic FeMnC and FeMnAlC alloys
resolves10.1007/BF02646146
The effect of aluminum on the work hardening and wear resistance of hadfield manganese steel
resolves10.1007/s11661-015-3100-4
On the Mechanisms of Different Work-Hardening Stages in Twinning-Induced Plasticity Steels
resolves10.1016/j.matdes.2015.12.038
Strain hardening behavior and deformation substructure of Fe–20/27Mn–4Al–0.3C non-magnetic steels
resolves10.1016/j.msea.2017.05.039
Deformation mechanisms during large strain deformation of high Mn TWIP steel
resolves10.1016/j.msea.2012.01.123
On the relationship between work hardening and twinning rate in TWIP steels
resolves10.1016/j.scriptamat.2013.02.060
Comparison of work hardening and deformation twinning evolution in Fe–22Mn–0.6C–(1.5Al) twinning-induced plasticity steels
resolves10.1016/j.msea.2014.10.042
Effect of carbon content on the mechanical properties and microstructural evolution of Fe–22Mn–C steels
resolves10.1016/j.mattod.2019.03.001
Real-time nanoscale observation of deformation mechanisms in CrCoNi-based medium- to high-entropy alloys at cryogenic temperatures
resolves10.1016/S0749-6419(00)00015-2
High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development — properties — application
resolves10.1016/j.msea.2017.11.012
Partially-recrystallized, Nb-alloyed TWIP steels with a superior strength-ductility balance
resolves10.1016/j.jmatprotec.2014.11.027
Influence of annealing temperature on mechanical properties and microstructures of a high manganese austenitic steel
resolves10.7763/IJAPM.2011.V1.38
The Effect of Thermo-Mechanical Treatment and Adding Niobium and Titanium on Microstructure and Mechanical Properties of TWIP Steel
resolves10.1016/j.msea.2014.08.051
Microstructure evolution and strengthening mechanisms of Fe–23Mn–0.3C–1.5Al TWIP steel during cold rolling
resolves10.1016/j.cossms.2011.04.002
High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships
resolves10.1016/S1674-4799(09)60026-1
Effects of annealing temperature on the microstructure and properties of the 25Mn-3Si-3Al TWIP steel
resolves10.1016/j.msea.2018.05.071
Effects of alloying addition on deformation mechanisms, microstructure, texture and mechanical properties in Fe-12Mn-0.5C austenitic steel
resolves10.1016/j.msea.2014.01.046
Thermodynamic calculation of stacking fault energy of the Fe–Mn–Si–C high manganese steels
resolves10.1016/j.msea.2004.01.059
Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe–Mn–C alloys
resolves10.1016/j.msea.2006.12.113
Equivalent twinning criteria for FCC alloys under uniaxial tension at high temperatures
resolves10.1016/j.matdes.2010.01.049
Tensile deformation behavior of high manganese austenitic steel: The role of grain size
resolves10.1016/j.actamat.2010.05.049
Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rate
resolves10.1016/j.pmatsci.2018.02.002
Review on superior strength and enhanced ductility of metallic nanomaterials
resolves10.1016/j.ijplas.2019.07.019
Extra strengthening in a coarse/ultrafine grained laminate: Role of gradient interfaces
resolves10.1016/j.actamat.2017.12.028
Simultaneous improvement of strength and plasticity: Additional work-hardening from gradient microstructure
resolves10.1038/s41578-020-0212-2
Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys
The 18 references without a DOI — listed, not checked
no DOI — not checkedHomogeneously introducing more and thinner nanotwins by engineering annealing twin boundaries: A TWIP steel as an example
no DOI — not checkedEnhancement of strength-ductility combination in recovery-annealed Fe-Mn-C twinninginduced plasticity steels by Si alloying
no DOI — not checkedNanostructured steel with high workhardening by the exploitation of the thermal stability of mechanically induced twins
no DOI — not checkedref15
no DOI — not checkedOn the more persistently-enhanced strain hardening in carbon-increased Fe-Mn-C twinning-induced plasticity steel
no DOI — not checkedEvaluation of the dislocation density and dislocation character in cold rolled Type 304 steel determined by profile analysis of X-ray diffraction
no DOI — not checkedHigh Mn TWIP steels for automotive applications
no DOI — not checkedNewer insights into the discrimination of pole mechanisms of twinning in a face-centered cubic high-Mn steel
no DOI — not checkedref45
no DOI — not checkedPrecipitation hardening of a FeMnC TWIP steel by vanadium carbides
no DOI — not checkedThe simultaneous improvement of strength and plasticity of a novel alloying steel by precipitation recovery annealing
no DOI — not checkedMechanical behaviors of a lower-Mn-added Fe-11Mn-10Al-1.25C lightweight steel with distinguished microstructural features
no DOI — not checkedOn the stress dependence of partial dislocation separation and deformation microstructure in austenitic stainless steels
no DOI — not checkedKinetics of f.c.c. deformation twinning and its relationship to stressstrain behaviour
no DOI — not checkedref64
no DOI — not checkedref65
no DOI — not checkedThe effect of Al on mechanical properties and microstructures of Fe-32Mn-12Cr-xAl-0.4C cryogenic alloys
no DOI — not checkedref69
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-09-10 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.2139/ssrn.4111831"><img src="https://citestamp.com/citestamped/10.2139/ssrn.4111831/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.2139/ssrn.4111831)