Reference health
Eutectic, Precipitation-Strengthened Alloy Via Laser Fusion of Blends Al-7Ce-10mg (Wt.%) and Zr+Sc Elemental or Prealloyed Powders
54/54 checkable references clean · checked 2026-07-24
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
33 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 54 checked references that resolve
resolves10.1016/j.ijlmm.2020.12.004
Challenges in additive manufacturing of high-strength aluminium alloys and current developments in hybrid additive manufacturing
resolves10.1016/j.pmatsci.2017.10.001
Additive manufacturing of metallic components – Process, structure and properties
resolves10.1016/j.addma.2020.101489
Research trends in laser powder bed fusion of Al alloys within the last decade
resolves10.1016/j.pmatsci.2015.03.002
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
resolves10.1016/j.jmst.2018.09.004
A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends
resolves10.1007/s10853-020-05037-z
Laser powder bed fusion of Al–10 wt% Ce alloys: microstructure and tensile property
resolves10.1016/j.actamat.2018.04.053
Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting
resolves10.1016/j.jmst.2021.06.023
Elimination of extraordinarily high cracking susceptibility of aluminum alloy fabricated by laser powder bed fusion
resolves10.1016/j.actamat.2019.04.014
Selective laser melting of a high strength Al Mn Sc alloy: Alloy design and strengthening mechanisms
resolves10.1016/j.msea.2017.06.089
SLM-processed Sc- and Zr- modified Al-Mg alloy: Mechanical properties and microstructural effects of heat treatment
resolves10.1016/j.jallcom.2019.01.327
Effect of TiB2 particles on microstructure and crystallographic texture of Al-12Si fabricated by selective laser melting
resolves10.3139/146.101249
Criteria for developing castable, creep-resistant aluminum-based alloys – A review
resolves10.1007/s11837-016-1943-9
Cerium-Based, Intermetallic-Strengthened Aluminum Casting Alloy: High-Volume Co-product Development
resolves10.1038/s41598-021-86370-4
Microstructure and properties of additively manufactured Al–Ce–Mg alloys
resolves10.1016/j.matdes.2021.109988
Enhanced thermal coarsening resistance in a nanostructured aluminum-cerium alloy produced by additive manufacturing
resolves10.1016/j.addma.2021.102404
Al-Cu-Ce(-Zr) alloys with an exceptional combination of additive processability and mechanical properties
resolves10.1016/j.actamat.2021.117285
Elevated temperature ductility dip in an additively manufactured Al-Cu-Ce alloy
resolves10.1016/j.actamat.2020.07.014
Microstructure and properties of a high temperature Al–Ce–Mn alloy produced by additive manufacturing
resolves10.1016/j.matdes.2016.11.040
Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting
resolves10.1016/j.cirp.2016.04.057
Microstructure and mechanical properties of as-processed scandium-modified aluminium using selective laser melting
resolves10.1016/j.actamat.2020.02.008
Coarsening- and creep resistance of precipitation-strengthened Al–Mg–Zr alloys processed by selective laser melting
resolves10.1016/j.matchar.2018.03.033
Effect of laser rescanning on the grain microstructure of a selective laser melted Al-Mg-Zr alloy
resolves10.1016/j.matdes.2021.109640
Design approaches for printability-performance synergy in Al alloys for laser-powder bed additive manufacturing
resolves10.1016/j.actamat.2017.10.040
Microstructure and mechanical properties of a precipitation-strengthened Al-Zr-Sc-Er-Si alloy with a very small Sc content
resolves10.1016/S1359-6454(03)00320-3
Mechanical properties of Al(Sc,Zr) alloys at ambient and elevated temperatures
resolves10.1016/S1359-6454(02)00201-X
Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys
resolves10.1016/j.addma.2018.05.032
Melt pool temperature and cooling rates in laser powder bed fusion
resolves10.1016/j.addma.2020.101461
Synthesis of precipitation-strengthened Al-Sc, Al-Zr and Al-Sc-Zr alloys via selective laser melting of elemental powder blends
resolves10.1016/j.jallcom.2021.159567
In-situ alloying in laser-based additive manufacturing processes: A critical review
resolves10.1016/j.actamat.2005.03.028
First-principles calculation of structural energetics of Al–TM (TM=Ti, Zr, Hf) intermetallics
resolves10.1016/j.jallcom.2019.153082
Remelt processing and microstructure of selective laser melted Ti25Ta
resolves10.1108/13552541111156450
The investigation of the influence of laser re‐melting on density, surface quality and microstructure of selective laser melting parts
resolves10.1016/j.jmrt.2022.01.129
Microstructural evolution and characterization of AlSi10Mg alloy manufactured by selective laser melting
resolves10.1016/j.actamat.2016.07.012
Microstructure and strength of selectively laser melted AlSi10Mg
resolves10.1016/j.actamat.2016.06.022
Multi-scale modeling of electron beam melting of functionally graded materials
resolves10.1016/j.jct.2018.08.010
Critical evaluation of experimental data of solution enthalpy of zirconium in liquid aluminum
resolves10.1002/aic.690180219
Forced convection heat transfer correlations for flow in pipes, past flat plates, single cylinders, single spheres, and for flow in packed beds and tube bundles
resolves10.1016/j.scriptamat.2017.02.036
Effect of Zirconium addition on crack, microstructure and mechanical behavior of selective laser melted Al-Cu-Mg alloy
resolves10.1016/j.apmt.2017.08.006
In situ absorptivity measurements of metallic powders during laser powder-bed fusion additive manufacturing
resolves10.1016/j.matdes.2018.01.022
Microstructure prediction of selective laser melting AlSi10Mg using finite element analysis
resolves10.1016/j.actamat.2016.02.014
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
resolves10.1080/09500830701191393
Development of an interatomic potential for the simulation of phase transformations in zirconium
The 33 references without a DOI — listed, not checked
no DOI — not checkedref1
no DOI — not checkedref3
no DOI — not checkedref7
no DOI — not checkedref8
no DOI — not checkedTowards high-temperature applications of aluminium alloys enabled by additive manufacturing
no DOI — not checkedref19
no DOI — not checkedDevelopment of Al-Ti-based alloys for laser powder bed fusion
no DOI — not checkedA novel method to 3D-print fine-grained AlSi10Mg alloy with isotropic properties via inoculation with LaB6 nanoparticles
no DOI — not checkedref24
no DOI — not checkedref29
no DOI — not checkedref30
no DOI — not checkedref31
no DOI — not checkedCast near-eutectic Al-12.5 wt.% Ce alloy with high coarsening and creep resistance
no DOI — not checkedComparing evolution of precipitates and strength upon aging of cast and laser-remelted
no DOI — not checkedref34
no DOI — not checkedref36
no DOI — not checkedA creep-resistant additively manufactured Al-Ce-Ni-Mn alloy
no DOI — not checkedUnderstanding grain refinement of Sc addition in a Zr containing Al-Zn-Mg-Cu aluminum alloy from experiments and first-principles
no DOI — not checkedref48
no DOI — not checkedEmerging metallic systems for additive manufacturing: In-situ alloying and multi-metal processing in laser powder bed fusion
no DOI — not checkedOperando X-ray diffraction study of thermal and phase evolution during laser powder bed fusion of Al-Sc-Zr elemental powder blends
no DOI — not checkedref58
no DOI — not checkedref63
no DOI — not checkedref69
no DOI — not checkedMultiphase mesoscopic simulation of multiple and functionally gradient materials laser powder bed fusion additive manufacturing processes
no DOI — not checkedref73
no DOI — not checkedref74
no DOI — not checkedThermal behavior in single track during selective laser melting of AlSi10Mg powder
no DOI — not checkedref77
no DOI — not checkedMathematical theory of heat distribution during heating and cutting
no DOI — not checkedref79
no DOI — not checkedref82
no DOI — not checkedSimulation of melt pool behaviour during additive manufacturing: Underlying physics and progress
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-24 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.2139/ssrn.4128728"><img src="https://citestamp.com/citestamped/10.2139/ssrn.4128728/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.2139/ssrn.4128728)