Reference health
A Comprehensive Evaluation of Vat-Photopolymerization Resins and Alumina Slurries Used in Ceramic Stereolithography
26/26 checkable references clean · checked 2026-07-22
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
12 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 26 checked references that resolve
resolves10.1016/j.jeurceramsoc.2021.10.043
3D printing ceramic cores for investment casting of turbine blades, using LCD screen printers: The mixture design and characterisation
resolves10.1016/j.jeurceramsoc.2020.04.004
Thermal conductivities and mechanical properties of AlN ceramics fabricated by three dimensional printing
resolves10.1016/j.jeurceramsoc.2018.06.046
The fabrication of SiBCN ceramic components from preceramic polymers by digital light processing (DLP) 3D printing technology
resolves10.1111/jace.13700
Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities
resolves10.1146/annurev-matsci-070115-031841
Ceramic Stereolithography: Additive Manufacturing for Ceramics by Photopolymerization
resolves10.1016/j.jeurceramsoc.2022.01.024
Digital light processing stereolithography of zirconia ceramics: Slurry elaboration and orientation-reliant mechanical properties
resolves10.4191/kcers.2017.54.6.12
Ceramic Stereolithography: Additive Manufacturing for 3D Complex Ceramic Structures
resolves10.1007/s00170-018-1932-y
Additive manufacturing technology: the status, applications, and prospects
resolves10.1039/D0CS01411G
Radical photoinitiation with LEDs and applications in the 3D printing of composites
resolves10.1108/13552549810222867
Stereolithography for the fabrication of ceramic three‐ dimensional parts
resolves10.1016/j.ceramint.2016.11.143
The effect of the surfactants on the formulation of UV-curable SLA alumina suspension
resolves10.1016/j.ceramint.2013.09.059
Optimization of rheological properties of photopolymerizable alumina suspensions for ceramic microstereolithography
resolves10.1016/j.jeurceramsoc.2021.03.036
Microstructure and properties evolution of silicon-based ceramic cores fabricated by 3D printing with stair-stepping effect control
resolves10.1016/j.jeurceramsoc.2011.01.019
Flow behavior of polymerizable ceramic suspensions as function of ceramic volume fraction and temperature
resolves10.1016/j.ceramint.2021.01.031
A review on the rheological behavior and formulations of ceramic suspensions for vat photopolymerization
resolves10.1002/app.47487
Acrylate‐based photosensitive resin for stereolithographic three‐dimensional printing
resolves10.1016/j.ceramint.2018.11.031
Influence of boundary masks on dimensions and surface roughness using segmented exposure in ceramic 3D printing
resolves10.1016/j.jeurceramsoc.2017.05.046
Lithography-based ceramic manufacturing (LCM) – Viscosity and cleaning as two quality influencing steps in the process chain of printing green parts
The 12 references without a DOI — listed, not checked
no DOI — not checkedA comprehensive review of the photopolymerization of ceramic resins used in stereolithography
no DOI — not checkedDigital light processing 3D printing of AlSi10Mg powder modified by surface coating
no DOI — not checkedAdditive manufacturing of ceramics: A review
no DOI — not checkedref12
no DOI — not checkedA review on additive manufacturing of ceramics, international manufacturing science and engineering conference
no DOI — not checkedInfluence of resin composition on the defect formation in alumina manufactured by stereolithography
no DOI — not checkedref24
no DOI — not checkedref25
no DOI — not checkedVolume shrinkage and conversion rate of Al2O3 ceramic stereolithography suspension polymerised by ultraviolet light
no DOI — not checkedA systematic study of vat-polymerization binders with potential use in the ceramic suspension 3D printing
no DOI — not checkedOptimization and characterization of high-viscosity ZrO 2 ceramic nanocomposite resins for supportless stereolithography
no DOI — not checkedMethods for the study of irritation and toxicity of substances applied topically to the skin and mucous membranes
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-22 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.2139/ssrn.4143046"><img src="https://citestamp.com/citestamped/10.2139/ssrn.4143046/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.2139/ssrn.4143046)