Reference health
Electrochemical Noise Studies on Localized Corrosion of Ni and Ni-20cr in Molten Zncl2
60/60 checkable references clean · checked 2026-07-25
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
17 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 60 checked references that resolve
resolves10.2172/1360677
Assessment of Candidate Molten Salt Coolants for the NGNP/NHI Heat-Transfer Loop
resolves10.1016/j.pmatsci.2018.05.003
Corrosion in the molten fluoride and chloride salts and materials development for nuclear applications
resolves10.1007/s11705-018-1720-0
Corrosion behavior of metallic alloys in molten chloride salts for thermal energy storage in concentrated solar power plants: A review
resolves10.1016/j.jnucmat.2018.07.036
Aggregation and data analysis of corrosion studies in molten chloride and fluoride salts
resolves10.1149/1.2114104
Current and Potential Transients during Localized Corrosion of Stainless Steel
resolves10.1016/0010-938X(89)90038-3
The localized breakdown and repair of passive surfaces during pitting
resolves10.1016/0013-4686(86)80018-4
Investigation of electrochemical processes by an electrochemical noise analysis. Theoretical and experimental aspects in potentiostatic regime
resolves10.1063/1.465440
Fluctuations in electrochemical systems. I. General theory on diffusion limited electrochemical reactions
resolves10.1149/1.1486822
Electrochemical Noise during Pitting Corrosion of Aluminum in Chloride Environments
resolves10.1016/j.electacta.2007.04.094
Noise resistance and shot noise parameters on the study of IGC of aluminium alloys with different heat treatments
resolves10.5006/1.3585059
Electrochemical Noise Generation during SCC of a High-Strength Carbon Steel
resolves10.1016/j.corsci.2006.05.012
Erosion–corrosion of stainless steel under impingement by a fluid jet
resolves10.1016/j.electacta.2004.01.040
A practical evaluation of electrochemical noise parameters as indicators of corrosion type
resolves10.1149/1.2115742
An Examination of Current Fluctuations during Pit Initiation in Fe‐Cr Alloys
resolves10.1080/02619180.1985.11753274
Electrochemical monitoring of high temperature corrosion processes
resolves10.1179/174327809X419159
High temperature corrosion monitoring by electrochemical noise techniques
resolves10.1149/1.1928187
Electrochemical Noise Measurements of Steel Corrosion in the Molten NaCl-K[sub 2]SO[sub 4] System
resolves10.1016/j.corsci.2007.11.011
Corrosion study of HK-40m alloy exposed to molten sulfate/vanadate mixtures using the electrochemical noise technique
resolves10.1016/j.corsci.2012.08.010
High temperature electrochemical sensor for in situ monitoring of hot corrosion
resolves10.1134/S2070205118020211
Field Corrosion Detection of Nuclear Materials using Electrochemical Noise Techinique
resolves10.1016/S0022-3115(97)00005-6
Detection of stress corrosion cracking and general corrosion of mild steel in simulated defense nuclear waste solutions using electrochemical noise analysis
resolves10.1016/j.corsci.2020.109105
Investigating corrosion behavior of Ni and Ni-20Cr in molten ZnCl2
resolves10.1021/acs.jpcb.0c00195
Connections between the Speciation and Solubility of Ni(II) and Co(II) in Molten ZnCl<sub>2</sub>
resolves10.1016/j.corsci.2005.02.015
Thermodynamic and kinetic consideration on the corrosion of Fe, Ni and Cr beneath a molten KCl–ZnCl2 mixture
resolves10.1016/S0921-5093(02)00386-6
Accelerated corrosion of pure Fe, Ni, Cr and several Fe-based alloys induced by ZnCl2–KCl at 450°C in oxidizing environment
resolves10.1016/j.solener.2014.02.002
Corrosion resistance of Hastelloys in molten metal-chloride heat-transfer fluids for concentrating solar power applications
resolves10.1016/j.solener.2018.01.067
Basic properties of eutectic chloride salts NaCl-KCl-ZnCl2 and NaCl-KCl-MgCl2 as HTFs and thermal storage media measured using simultaneous DSC-TGA
resolves10.1149/2.0991913jes
Review—Electrochemical Measurements in Molten Salt Systems: A Guide and Perspective
resolves10.1016/0010-938X(92)90053-6
A stochastic analysis of potential fluctuation during passive film breakdown and repair on iron
resolves10.1016/0010-938X(90)90132-O
The breakdown and repassivation of passive films on iron whisker and amorphous alloys
resolves10.1016/S0010-938X(96)00066-2
The generation of surface roughness during slurry erosion-corrosion and its effect on the pitting potential
resolves10.1098/rsta.1992.0114
Metastable pitting corrosion of stainless steel and the transition to stability
resolves10.1149/2.1381704jes
Perspective—Localized Corrosion: Passive Film Breakdown vs Pit Growth Stability
resolves10.1016/j.corsci.2018.08.021
Effects of alloying elements on the corrosion behavior of Ni-based alloys in molten NaCl-KCl-MgCl2 salt at different temperatures
resolves10.1016/j.scriptamat.2021.113790
Determining oxidation states of transition metals in molten salt corrosion using electron energy loss spectroscopy
resolves10.1071/CH9752579
Stoichiometry and mechanism of the cathodic reduction process for HCl dissolved in LiCI-KCl eutectic
resolves10.1016/S0013-4686(02)00827-7
Structure, dissolution, and passivation of Ni(111) electrodes in sulfuric acid solution: an in situ STM, X-ray scattering, and electrochemical study
resolves10.2320/matertrans.44.40
Volume and Grain Boundary Diffusion of Chromium in Ni-Base Ni-Cr-Fe Alloys
resolves10.1007/s10008-008-0652-x
Fundamental aspects of the polarization resistance technique—the early days
The 17 references without a DOI — listed, not checked
no DOI — not checkedref5
no DOI — not checkedref11
no DOI — not checkedChromate inhibition of the localized corrosion of aluminum: Measurements of electrochemical transients
no DOI — not checkedref28
no DOI — not checkedref38
no DOI — not checkedref40
no DOI — not checkedNeutron scattering function of vitreous and molten zinc chloride
no DOI — not checkedref49
no DOI — not checkedA stochastic analysis of potential fluctuations during passive film breakdown and repair of iron
no DOI — not checkedref55
no DOI — not checkedEvaluation of current transients to study pit initiation
no DOI — not checkedPotential scanning of stainless steel during pitting corrosion
no DOI — not checkedLocalized corrosion: Passive film breakdown vs. Pit growth stability, Part VI: Pit dissolution kinetics of different alloys and a model for pitting and repassivation potentials
no DOI — not checkedAssessment of effects of Mg treatment on corrosivity of molten NaCl-KCl-MgCl 2 salt with Raman and Infrared spectra
no DOI — not checkedBehaviour of moisture in LiCl KCl eutectic for pyrochemical process
no DOI — not checkedDiffusion of Ni63 and Cr51 in nickel-chromium alloys
no DOI — not checkedElectrochemical noise for detection of susceptibility to stress corrosion cracking
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-25 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.2139/ssrn.4156205"><img src="https://citestamp.com/citestamped/10.2139/ssrn.4156205/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.2139/ssrn.4156205)