Reference health
Mechanistic Origin of Abnormal Annealing-Induced Hardening in an AlCoCrFeNi <sub>2.1</sub> Eutectic Multi-Principal-Element Alloy
57/57 checkable references clean · checked 2026-07-23
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
10 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 57 checked references that resolve
resolves10.1016/j.actamat.2017.07.041
Microstructural origins of high strength and high ductility in an AlCoCrFeNi2.1 eutectic high-entropy alloy
resolves10.1016/j.actamat.2016.11.016
Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range
resolves10.1016/j.scriptamat.2021.113909
A carbide-reinforced Re0.5MoNbW(TaC)0.8 eutectic high-entropy composite with outstanding compressive properties
resolves10.1016/j.mtadv.2020.100101
A high-entropy alloy as very low melting point solder for advanced electronic packaging
resolves10.1016/j.matchemphys.2017.06.023
Effect of low temperature on tensile properties of AlCoCrFeNi2.1 eutectic high entropy alloy
resolves10.1016/j.scriptamat.2020.06.022
Promising properties and future trend of eutectic high entropy alloys
resolves10.1016/j.jmst.2020.04.073
Faceted Kurdjumov-Sachs interface-induced slip continuity in the eutectic high-entropy alloy, AlCoCrFeNi2.1
resolves10.1016/j.actamat.2015.08.076
A precipitation-hardened high-entropy alloy with outstanding tensile properties
resolves10.1016/j.actamat.2014.10.033
Nanoscale phase separation in a fcc-based CoCrCuFeNiAl0.5 high-entropy alloy
resolves10.1016/j.scriptamat.2020.04.035
High-strength and high-ductility AlCoCrFeNi2.1 eutectic high-entropy alloy achieved via precipitation strengthening in a heterogeneous structure
resolves10.1016/j.msea.2016.08.048
Tailoring nanostructures and mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy using thermo-mechanical processing
resolves10.1080/21663831.2016.1160451
Ultrafine-Grained AlCoCrFeNi<sub>2.1</sub>Eutectic High-Entropy Alloy
resolves10.1016/j.intermet.2016.12.018
Cold-rolling and recrystallization textures of a nano-lamellar AlCoCrFeNi2.1 eutectic high entropy alloy
resolves10.1038/s41467-019-08460-2
Enhanced strength–ductility synergy in ultrafine-grained eutectic high-entropy alloys by inheriting microstructural lamellae
resolves10.1016/j.mattod.2020.09.029
Multistage work hardening assisted by multi-type twinning in ultrafine-grained heterostructural eutectic high-entropy alloys
resolves10.1016/j.scriptamat.2020.07.027
Strengthening CoCrNi medium-entropy alloy by tuning lattice defects
resolves10.1016/j.msea.2018.11.143
Tailoring mechanical properties of a CoCrNi medium-entropy alloy by controlling nanotwin-HCP lamellae and annealing twins
resolves10.1016/j.jmst.2021.02.053
Unveiling anneal hardening in dilute Al-doped Al CoCrFeMnNi (x = 0, 0.1) high-entropy alloys
resolves10.1016/S1359-6454(98)00235-3
The secondary hardening phenomenon in strain-hardened MP35N alloy
resolves10.1557/JMR.1992.1564
An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments
resolves10.1088/0959-5309/57/3/302
An experimental investigation of extrapolation methods in the derivation of accurate unit-cell dimensions of crystals
resolves10.1016/j.matdes.2019.107648
FCC-L12 ordering transformation in equimolar FeCoNiV multi-principal element alloy
resolves10.1016/j.jallcom.2019.04.035
Transformation-reinforced high-entropy alloys with superior mechanical properties via tailoring stacking fault energy
resolves10.1088/0953-8984/19/45/455211
Fluctuation electron microscopy of Al-based metallic glasses: effects of minor alloying addition and structural relaxation on medium-range structural homogeneity
resolves10.1016/j.matdes.2012.12.033
Grain refinement of A356 alloy by Al–Ti–B–C master alloy and its effect on mechanical properties
resolves10.1016/j.matchar.2007.01.011
Influence of grain refinement and modification on microstructure and mechanical properties of Al–7Si and Al–7Si–2.5Cu cast alloys
resolves10.1016/j.msea.2018.10.042
Influence of Er addition on microstructure and mechanical properties of as-cast Mg-10Li-5Zn alloy
resolves10.1016/j.jallcom.2021.162718
Effect of Zn addition on the microstructure and mechanical properties of as-cast BCC Mg-11Li based alloys
resolves10.1016/j.matchar.2020.110135
High specific strength Mg-Li-Zn-Er alloy processed by multi deformation processes
resolves10.1016/j.msea.2020.140322
Evolution of microstructure, phases and mechanical properties in lean as-cast Mg–Al–Ca–Mn alloys under the influence of a wide range of Ca/Al ratio
resolves10.1016/j.msea.2020.139330
The effect of iron on the microstructure and mechanical properties of a cast Cu–12Sn-1.5Ni (wt. %) alloy
resolves10.1016/j.jallcom.2017.06.320
Prediction of mechanical performance of Ti6Al4V cast alloy based on microCT-based load simulation
resolves10.1016/j.actamat.2021.116621
Mechanical response of dislocation interaction with grain boundary in ultrafine-grained interstitial-free steel
resolves10.1016/j.msea.2016.09.055
Microstructure and mechanical properties of strip cast TRIP steel subjected to thermo-mechanical simulation
resolves10.1016/j.matchar.2013.07.019
Strengthening of σ phase in a Fe20Cr9Ni cast austenite stainless steel
resolves10.1016/j.matdes.2013.08.103
Effects of cooling method after intercritical heat treatment on microstructural characteristics and mechanical properties of as-cast high-strength low-alloy steel
resolves10.1016/j.matdes.2013.09.005
Evolution of microstructure and mechanical properties under different austempering holding time of cast Fe–1.5Si–1.5Mn–V steels
resolves10.1016/j.msea.2022.142695
Evolution of microstructure and mechanical properties in 2205 duplex stainless steels during additive manufacturing and heat treatment
resolves10.1016/j.actamat.2013.09.037
Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system
resolves10.1016/j.scriptamat.2013.09.030
A novel, single phase, non-equiatomic FeMnNiCoCr high-entropy alloy with exceptional phase stability and tensile ductility
resolves10.1016/j.jmst.2021.08.034
Ultrastrong and ductile BCC high-entropy alloys with low-density via dislocation regulation and nanoprecipitates
resolves10.1016/j.jmst.2020.05.053
Tensile deformation behavior and mechanical properties of a bulk cast Al0.9CoFeNi2 eutectic high-entropy alloy
resolves10.1038/s41467-019-13311-1
Tailoring heterogeneities in high-entropy alloys to promote strength–ductility synergy
resolves10.1016/j.scriptamat.2021.114230
Designing TiVNbTaSi refractory high-entropy alloys with ambient tensile ductility
resolves10.1016/j.jallcom.2007.10.076
Influence of heat of formation of B2/L12 intermetallic compounds on the milling energy for their formation during mechanical alloying
resolves10.1016/j.intermet.2004.10.005
Miscibility gap of B2 phase in NiAl to Cu3Al section of the Cu–Al–Ni system
resolves10.1016/j.intermet.2014.06.004
On the entropic stabilisation of an Al0.5CrFeCoNiCu high entropy alloy
resolves10.1016/j.intermet.2006.08.015
Phase equilibria between the B2, L12, and fcc phases in the Ir–Ni–Al system
resolves10.1088/0959-5309/52/1/312
An attempt to estimate the degree of precipitation hardening, with a simple model
resolves10.1016/0921-5093(93)90596-7
Predicting slip behavior in alloys containing shearable and strong particles
resolves10.1038/s41586-021-03607-y
Bifunctional nanoprecipitates strengthen and ductilize a medium-entropy alloy
resolves10.1038/nature22032
Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation
resolves10.1016/j.actamat.2012.09.036
Strengthening mechanisms in a high-strength bulk nanostructured Cu–Zn–Al alloy processed via cryomilling and spark plasma sintering
resolves10.1016/j.actamat.2013.09.042
Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy
The 10 references without a DOI — listed, not checked
no DOI — not checkedref1
no DOI — not checkedTemperature-dependent compression behavior of an Al 0.5 CoCrCuFeNi high-entropy alloy
no DOI — not checkedSlip systems in <001> oriented NiAl single crystals
no DOI — not checkedref30
no DOI — not checkedref33
no DOI — not checkedref39
no DOI — not checkedref45
no DOI — not checkedEffects of mixing enthalpy and cooling rate on phase formation of Al x CoCrCuFeNi high-entropy alloys
no DOI — not checkedref60
no DOI — not checkedDislocation nucleation and the intrinsic fracture behavior of L1 2 intermetallic alloys
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-07-23 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.2139/ssrn.4160454"><img src="https://citestamp.com/citestamped/10.2139/ssrn.4160454/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.2139/ssrn.4160454)