Reference health

Room Temperature Creep Mechanisms of Ti-6al-4v Eli Alloy with Equiaxed Microstructure Under Different Applied Stresses

https://doi.org/10.2139/ssrn.4485553
CiteStamped reference-health badge
37/37 checkable references clean · checked 2026-09-06

Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.

5 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.

The 37 checked references that resolve
resolves10.1016/j.ijplas.2020.102777
A constitutive model for a rate and temperature-dependent, plastically anisotropic titanium alloy
resolves10.1016/j.ijplas.2012.03.015
Deformation induced anisotropic responses of Ti–6Al–4V alloy. Part I: Experiments
resolves10.1007/BF02646658
Microstructure, creep, and tensile deformation in Ti-6Al-2Nb-1Ta-0.8Mo
resolves10.1016/j.msea.2014.05.094
The temperature and stress dependent primary creep of CP-Ti at low and intermediate temperature
resolves10.1016/0956-716X(94)90203-8
Time dependent twinning during ambient temperature creep of α TiMn alloy
resolves10.1007/s11661-005-0179-z
The effects of stress level and grain size on the ambient temperature creep deformation behavior of an alpha Ti-1.6 wt pct V alloy
resolves10.1016/j.scriptamat.2011.06.049
Modeling interstitial diffusion controlled twinning in alpha titanium during low-temperature creep
resolves10.1016/j.ijplas.2008.06.002
The effect of time-dependent twinning on low temperature (<0.25∗Tm) creep of an alpha-titanium alloy
resolves10.1007/s11661-002-0159-5
Observations of room-temperature creep recovery in titanium alloys
resolves10.1016/j.proeng.2013.03.212
Advances in Low-Temperature (<0.25Tm) Creep Behavior of Single and Two-Phase Titanium Alloys
resolves10.1016/j.ijplas.2018.06.009
Dislocation interactions and crack nucleation in a fatigued near-alpha titanium alloy
resolves10.1007/BF02586108
Influence of the second phase on the room-temperature tensile and creep deformation mechanisms of α-β titanium alloys, part II: Creep deformation
resolves10.1016/j.ijplas.2020.102743
The role of dwell hold on the dislocation mechanisms of fatigue in a near alpha titanium alloy
resolves10.1016/j.actamat.2022.117691
Slip activity during low-stress cold creep deformation in a near-α titanium alloy
resolves10.1016/j.ijplas.2021.103161
The roles of rise and fall time in load shedding and strain partitioning under the dwell fatigue of titanium alloys with different microstructures
resolves10.1016/j.ijplas.2021.103140
Texture induced planar anisotropy of dwell fatigue response in titanium: Insights from experiments and crystal plasticity simulations
resolves10.1016/S1359-6454(99)00426-7
Phenomenological and microstructural analysis of room temperature creep in titanium alloys
resolves10.1016/S0921-5093(01)01045-0
Short-range order (SRO) and its effect on the primary creep behavior of a Ti–6wt.%Al alloy
resolves10.1080/01418610208243202
Observation and analysis of weak-fringing faults in Ti-6 wt% Al
resolves10.2320/matertrans.M2009224
Intragranular Deformation Mechanisms during Ambient-Temperature Creep in Hexagonal Close-Packed Metals
resolves10.1016/j.actamat.2015.09.014
Influence of complex LCF and dwell load regimes on fatigue of Ti–6Al–4V
resolves10.1007/s11661-007-9105-x
Dwell Fatigue Microstructure in a Near-α Titanium Alloy
resolves10.1007/BF02644025
Hexagonal dislocation networks in titanium
resolves10.1016/j.actamat.2005.10.017
Dislocation structure of non-habit plane of α precipitates in a Ti–7.26 wt.% Cr alloy
resolves10.1016/j.actamat.2008.01.052
Creep mechanisms in Ti–3Al–2.5V alloy tubing deformed under closed-end internal gas pressurization
resolves10.1016/j.msea.2015.10.092
Creep of Ti–5Al–5Mo–5V–1Fe–1Cr alloy with equiaxed and lamellar microstructures
resolves10.1016/j.scriptamat.2008.05.009
Effect of trace impurities on the creep behavior of a near α titanium alloy
resolves10.1016/j.jmrt.2014.06.009
Low temperature creep plasticity
resolves10.1016/j.actamat.2017.05.015
Direct measurement of critical resolved shear stress of prismatic and basal slip in polycrystalline Ti using high energy X-ray diffraction microscopy
resolves10.1016/j.actamat.2009.07.064
Anisotropy in the plastic flow properties of single-crystal α titanium determined from micro-cantilever beams
resolves10.1016/j.actamat.2020.03.003
Effect of heat treatment on the tensile behavior of selective laser melted Ti-6Al-4V by in situ X-ray characterization
resolves10.1016/j.ijplas.2015.04.002
Temperature and stain rate effect on the deformation of nanostructured pure titanium
resolves10.1016/j.actamat.2018.04.001
Combined strengthening from nanotwins and nanoprecipitates in an iron-based superalloy
resolves10.1016/j.ijplas.2019.09.013
Polycrystal plasticity modeling for load reversals in commercially pure titanium
resolves10.1016/j.actamat.2020.08.076
The role of pyramidal 〈  +  〉 dislocations in the grain refinement mechanism in Ti-6Al-4V alloy processed by severe plastic deformation
resolves10.1007/s10853-009-4178-0
The effect of metastability on room temperature deformation behavior of β and α + β titanium alloys
resolves10.1016/j.jmps.2016.08.008
Dwell fatigue in two Ti alloys: An integrated crystal plasticity and discrete dislocation study
The 5 references without a DOI — listed, not checked
no DOI — not checkedref1
no DOI — not checkedCreep anisotropy characteristics and microstructural crystallography of marine engineering titanium alloy Ti6321 plate at room temperature
no DOI — not checkedref24
no DOI — not checkedMechanical behavior, deformation mechanism and microstructure evolutions of ultrafine-grained Al during recovery via annealing
no DOI — not checkedThe formation of cracks as a result of plastic flow
What this badge says. CiteStamped means the CHECKABLE references of this work were clean at the dated check: each resolved to a known work in a public registry, and none carried a retraction notice at that time. It says nothing about the quality, findings, or importance of the work itself, and nothing about references deposited without a DOI.

checked 2026-09-06 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record

Embed this badge

Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.

<a href="https://citestamp.com/citestamped/10.2139/ssrn.4485553"><img src="https://citestamp.com/citestamped/10.2139/ssrn.4485553/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[![CiteStamped reference-health badge](https://citestamp.com/citestamped/10.2139/ssrn.4485553/badge.svg)](https://citestamp.com/citestamped/10.2139/ssrn.4485553)