Reference health

Breakdown of the Protective Oxide on 304l in H2 + H2o Environment – Towards a Mechanistic Understanding

https://doi.org/10.2139/ssrn.4514530
CiteStamped reference-health badge
33/33 checkable references clean · checked 2026-09-02

Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.

13 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.

The 33 checked references that resolve
resolves10.1023/A:1018875024306
Indication of Chromium Oxide Hydroxide Evaporation During Oxidation of 304L at 873 K in the Presence of 10% Water Vapor
resolves10.1023/A:1014877600235
Evidence for Chromium Evaporation Influencing the Oxidation of 304L: The Effect of Temperature and Flow Rate
resolves10.1017/CBO9781139163903
Introduction to the High Temperature Oxidation of Metals
resolves10.1007/s11085-010-9199-1
High Temperature Oxidation of the Austenitic (35Fe27Cr31Ni) Alloy Sanicro 28 in O2 + H2O Environment
resolves10.1590/S1516-14392004000100016
The role of alloy composition, environment and stresses for the oxidation resistance of modern 9% Cr steels for fossil power stations
resolves10.1007/s11085-009-9182-x
Microstructure Evolution During Steam Oxidation of a Nb Stabilized Austenitic Stainless Steel
resolves10.1007/s11837-009-0102-y
Effect of water vapor on high-temperature oxidation of FeCr alloys
resolves10.1007/s11085-007-9090-x
The Effect of Water Vapor on Selective Oxidation of Fe–Cr Alloys
resolves10.1016/j.scriptamat.2007.06.058
Enhanced internal oxidation as trigger for breakaway oxidation of Fe–Cr alloys in gases containing water vapor
resolves10.1016/j.corsci.2013.06.016
Oxidation of Fe–10Cr in O2 and in O2+H2O environment at 600°C: A microstructural investigation
resolves10.1149/1.2425624
Oxide Structures Produced on Iron-Chromium Alloys by a Dissociative Mechanism
resolves10.1149/1.2425963
The Mechanism of the High-Temperature Oxidation of Iron-Chromium Alloys in Water Vapor
resolves10.1179/mht.2000.17.2.008
Characterization of Chromia Scales Grown on Pure Chromium in Different Oxidizing Atmospheres
resolves10.1023/A:1023040010859
Role of Water Vapor in Chromia-Scale Growth at Low Oxygen Partial Pressure
resolves10.1016/j.corsci.2009.08.032
Effects of water vapour on isothermal oxidation of chromia-forming alloys in Ar/O2 and Ar/H2 atmospheres
resolves10.1021/jp0647380
Theoretical and Experimental Investigation of the Thermochemistry of CrO <sub>2</sub> (OH) <sub>2</sub> (g)
resolves10.1016/S0364-5916(02)00037-8
Thermo-Calc &amp; DICTRA, computational tools for materials science
resolves10.1007/s11085-016-9610-7
Oxidation After Breakdown of the Chromium-Rich Scale on Stainless Steels at High Temperature: Internal Oxidation
resolves10.1515/zpch-1933-2105
Beitrag zur Theorie des Anlaufvorgangs
resolves10.1007/s11085-017-9731-7
High-Temperature Oxidation of FeCr(Ni) Alloys: The Behaviour After Breakaway
resolves10.1007/s11085-009-9183-9
Water Vapour Effects on Fe–Cr Alloy Oxidation
resolves10.1007/s11085-005-5704-3
KCl Induced Corrosion of a 304-type Austenitic Stainless Steel at 600°C; The Role of Potassium
resolves10.1007/s11085-017-9785-6
The Effect of Temperature on the Formation of Oxide Scales Regarding Commercial Superheater Steels
resolves10.1007/s11085-011-9240-z
The Effects of KCl, K2SO4 and K2CO3 on the High Temperature Corrosion of a 304-Type Austenitic Stainless Steel
resolves10.1016/j.corsci.2020.108511
Continuous KCl addition in high temperature exposures of 304 L – A way to mimic a boiler environment
resolves10.1021/acs.energyfuels.6b00372
A Laboratory Study of the in Situ Sulfation of Alkali Chloride Rich Deposits: Corrosion Perspective
resolves10.1007/s11085-008-9114-1
Paralinear Oxidation of Chromium in O2 + H2O Environment at 600–700 °C
resolves10.1149/1.2754174
Initial Stages of the HCl-Induced High-Temperature Corrosion of Alloy 310
resolves10.1016/j.surfcoat.2012.08.096
Oxidation of Co- and Ce-nanocoated FeCr steels: A microstructural investigation
resolves10.1149/1.2768909
Influence of H[sub 2]O(g) on the Oxide Microstructure of the Stainless Steel 353MA at 900°C in Oxygen
resolves10.1007/BF01682374
Oxygen exchange in oxidation of an Fe-20Cr-10Al alloy in ∼10 mbar O2/H2O-gas mixtures at 920°C
resolves10.1016/j.jpowsour.2018.04.088
Temperature dependence of corrosion of ferritic stainless steel in dual atmosphere at 600–800 °C
resolves10.1149/1.1767349
Hydrogen Permeation Through Fe-16Cr Alloy Interconnect in Atmosphere Simulating SOFC at 1073 K
The 13 references without a DOI — listed, not checked
no DOI — not checkedref3
no DOI — not checkedref6
no DOI — not checkedref8
no DOI — not checkedref13
no DOI — not checkedref14
no DOI — not checkedAbnormal oxidation of stabilized ferritic stainless steels in water vapor
no DOI — not checkedProcess investigation of corrosion experiments at low oxygen activity environments containing H2/H2O
no DOI — not checkedThe Effect of H2 and H2O on the Oxidation of 304L Stainless Steel at 600 C: General Behaviour (Part I)
no DOI — not checkedO Environment at 600 degrees C
no DOI — not checkedThe influence of oxygen partial pressure on the base oxide of chromia forming steels: The story prior to breakaway oxidation
no DOI — not checkedref42
no DOI — not checkedThe effect of hydrogen on the breakdown of the protective oxide scale in solid oxide fuel cell interconnects
no DOI — not checkedref45
What this badge says. CiteStamped means the CHECKABLE references of this work were clean at the dated check: each resolved to a known work in a public registry, and none carried a retraction notice at that time. It says nothing about the quality, findings, or importance of the work itself, and nothing about references deposited without a DOI.

checked 2026-09-02 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record

Embed this badge

Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.

<a href="https://citestamp.com/citestamped/10.2139/ssrn.4514530"><img src="https://citestamp.com/citestamped/10.2139/ssrn.4514530/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[![CiteStamped reference-health badge](https://citestamp.com/citestamped/10.2139/ssrn.4514530/badge.svg)](https://citestamp.com/citestamped/10.2139/ssrn.4514530)