Reference health
Study on the Impact of Different Hole Shapes on Liquefied Gas Leakage Behavior
45/45 checkable references clean · checked 2026-09-10
Every reference with a DOI in the deposited reference list resolved to a known work in Crossref or DataCite at the dated check, and none carried a retraction, withdrawal, or removal notice.
6 without a DOI — not checked. A reference deposited without a DOI is never matched by title or guessed at; it stays outside the checked set, and this line discloses that.
The 45 checked references that resolve
resolves10.1515/revce-2016-0006
Theoretical and experimental studies on hazard analysis of LPG/LNG release: a review
resolves10.1016/0950-4230(88)80016-0
Source term considerations in connection with chemical accidents and vapour cloud modelling
resolves10.1016/j.ijheatmasstransfer.2019.118704
Evaluation of the atomization characteristics of aviation fuels with different viscosities using a pressure swirl atomizer
resolves10.1016/j.expthermflusci.2019.01.004
Discharge coefficient of high viscosity liquids through nozzles
resolves10.1016/j.ijheatfluidflow.2013.08.005
The influence of back pressure on the flow discharge coefficients of plain orifice nozzle
resolves10.21595/jve.2018.19049
Discharge coefficient calculation method of landing gear shock absorber and its influence on drop dynamics
resolves10.1016/j.psep.2021.05.005
Experimental study of liquefied gas dynamic leakage behavior from a pressurized vessel
resolves10.1016/j.ast.2015.12.014
The role of backpressure on discharge coefficient of sharp edged injection orifices
resolves10.1016/j.ijheatfluidflow.2009.03.011
Study of cavitation phenomena based on a technique for visualizing bubbles in a liquid pressurized chamber
resolves10.1243/JMES_JOUR_1965_007_029_02
Discharge Coefficients for Incompressible Non-Cavitating Flow through Long Orifices
resolves10.1016/j.fuel.2016.06.080
Near-nozzle spray and spray collapse characteristics of spark-ignition direct-injection fuel injectors under sub-cooled and superheated conditions
resolves10.1016/j.applthermaleng.2018.10.031
Radial expansion of flash boiling jet and its relationship with spray collapse in gasoline direct injection engine
resolves10.1016/j.ijheatmasstransfer.2018.07.109
Characteristics and correlation of nozzle internal flow and jet breakup under flash boiling conditions
resolves10.1243/095765005X31333
Experimental and numerical study of high-pressure-swirl injector sprays in a direct injection gasoline engine
resolves10.1016/j.fuel.2017.12.038
Experimental investigation on effect of ethanol and di-ethyl ether addition on the spray characteristics of diesel/biodiesel blends under high injection pressure
resolves10.1016/j.ijheatmasstransfer.2017.08.040
Experimental study on the relation between internal flow and flashing spray characteristics of R134a using straight tube nozzles
resolves10.1016/j.fuel.2004.12.003
Characterisation of very high pressure diesel sprays using digital imaging techniques
resolves10.1016/j.fuel.2018.04.156
Internal flow and spray characteristics for elliptical orifice with large aspect ratio under typical diesel engine operation conditions
resolves10.1016/j.ijheatfluidflow.2020.108536
A phase averaged PIV study of circular and non-circular synthetic turbulent jets issuing from sharp edge orifices
resolves10.1016/j.ijheatfluidflow.2013.05.017
Particle image velocimetry investigation on mixing enhancement of non-circular sharp edge nozzles
resolves10.1115/1.4040031
On the Development of Incompressible Round and Equilateral Triangular Jets Due to Reynolds Number Variation
resolves10.1007/s00348-005-0988-2
Measurements in the near flow field of an isosceles triangular turbulent free jet
resolves10.1016/j.ijmultiphaseflow.2019.03.011
Effects of aspect ratio on the flow development of rectangular liquid jets issued into stagnant air
resolves10.1016/j.ijmultiphaseflow.2019.07.006
Wavelength and frequency of axis-switching phenomenon formed over rectangular and elliptical liquid jets
resolves10.1016/j.fuel.2015.02.119
Spray and atomization of a common rail fuel injector with non-circular orifices
resolves10.1016/j.ijmultiphaseflow.2015.02.015
Liquid jet breakup for non-circular orifices under low pressures
resolves10.1016/j.fuel.2018.10.146
Experimental study on the spray and mixing characteristics for equilateral triangular and circular nozzles with diesel and biodiesel under high injection pressures
resolves10.1016/j.jlp.2022.104840
Morphological characteristics and flashing mechanism of superheated liquid jets released from rectangular breaches
resolves10.1080/17686733.2013.786903
Differential infrared thermography (DIT) in a flashing jet: a feasibility study
resolves10.1080/17686733.2015.1084725
Differential infrared thermography of gasoline direct injection sprays
resolves10.1016/j.ijheatmasstransfer.2008.04.020
Vapor/liquid phase interaction in flare flashing sprays used in dermatologic cooling
resolves10.1016/S0017-9310(00)00363-X
Theoretical and experimental analysis of droplet diameter, temperature, and evaporation rate evolution in cryogenic sprays
resolves10.1016/j.ijheatmasstransfer.2012.04.021
An experimental study on the spray and thermal characteristics of R134a two-phase flashing spray
resolves10.1016/j.applthermaleng.2012.01.028
An experimental study on pulsed spray cooling with refrigerant R-404a in laser surgery
resolves10.1016/j.foodchem.2010.08.042
Extraction of β-carotenes from palm oil mesocarp using sub-critical R134a
resolves10.1016/j.psep.2018.10.001
Effect of burner types and steam injection methods on thermal destruction of waste refrigerants (HFC-134a)
resolves10.1016/j.powtec.2019.07.081
Experimental and mathematical investigations of spray angle and droplet sizes of a flash evaporation desalination system
resolves10.1016/j.ijrefrig.2015.08.016
Surface heat transfer characteristics of R404A pulsed spray cooling with an expansion-chambered nozzle for laser dermatology
resolves10.1016/j.apenergy.2019.04.067
Advancements on scaling-up simulation of Proton Exchange Membrane Fuel Cells impedance through Buckingham Pi theorem
The 6 references without a DOI — listed, not checked
no DOI — not checkedPressure-decay and thermodynamic characteristics of subcooled liquid in the tank and their interaction with flashing jets
no DOI — not checkedEmpirical correlation for spray half cone angle in plain-jet airblast atomizers
no DOI — not checkedExperimental investigation of jet impingement during accidental release of liquid CO2
no DOI — not checkedSingle hole ammonia spray macroscopic and microscopic characteristics at flare and transition flash boiling regions
no DOI — not checkedA morphological study of supercritical fuel flash-boiling spray
no DOI — not checkedExperimental study on the combustion , emissions and fuel consumption of elliptical nozzle diesel engine
What this badge says. CiteStamped means the CHECKABLE references of this
work were clean at the dated check: each resolved to a known work in a public registry, and none
carried a retraction notice at that time. It says nothing about the quality, findings,
or importance of the work itself, and nothing about references deposited without a DOI.
checked 2026-09-10 — re-checked daily as this page is visited; titles and statuses come from Crossref and DataCite and are not part of the signed record
Embed this badge
Both snippets point at the live badge image and link back to this page. The badge re-renders from the daily check, so an embed never goes stale by more than a day of visits.
<a href="https://citestamp.com/citestamped/10.2139/ssrn.4660956"><img src="https://citestamp.com/citestamped/10.2139/ssrn.4660956/badge.svg" alt="CiteStamped reference-health badge" width="460" height="64"></a>
[](https://citestamp.com/citestamped/10.2139/ssrn.4660956)